it's catit's single

725 Articulated Truck

725 Articulated Truck

The Cat® 725 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Request a Quote

Engine ModelCat C9.3

Bore4.5in

Stroke45.2in

Displacement567.5in³

Peak Engine Torque Gross (SAE J1995)1275ft·lbf

Engine Model - U.S. EPA Tier 4 Final/EU Stage IVCat® C9.3

No Engine De-rating Below3000ft

Peak Engine Torque Net (SAE J1349)1263ft·lbf

Peak Engine Torque Speed1200r/min

Note (1)The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.

EmissionsThe reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.

Note (3)Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.

Note (2)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Note (4)DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Rated Payload26.5ton (US)

Heaped (SAE 2:1)19.6yd³

Struck14.4yd³

Tailgate Heaped SAE 2:120.4yd³

Tailgate Struck14.5yd³

Forward - 15mT/hr

Forward - 29.4mT/hr

Forward - 314.4mT/hr

Forward - 422.1mT/hr

Forward - 530.7mT/hr

Forward - 636.3mT/hr

Reverse - 15.5mT/hr

Fuel Tank91gal (US)

Cooling System18gal (US)

Hydraulic System29.1gal (US)

Engine Crankcase8gal (US)

Transmission10gal (US)

Final Drives/Differential33gal (US)

Output Transfer Gear Box5gal (US)

Steering/Hoist Hydraulic System24gal (US)

Final Drive - Each1.6gal (US)

Interior Cab69dB(A)

Note (1)The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f

Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Raise Time10s

Lower Time8s

BrakesISO 3450 – 2011

Cab - FOPSISO 3449 Level II – 2008

Cab - ROPSISO 3471 – 2008

SteeringISO 5010 – 2007

Total - Loaded103886lb

Rear Axle - Rated Load23699lb

Total - Empty50975lb

Total - Rated Load52910lb

Center Axle - Loaded33944lb

Front Axle - Rated Load5511lb

Center Axle - Rated Load23699lb

Center Axle - Empty10242lb

Rear Axle - Loaded33457lb

Front Axle - Loaded36484lb

Rear Axle - Empty9757lb

Front Axle - Empty30974lb

Side Plates0.43in

Front Plate0.28in

Base Plate0.51in

Lock to Lock4.75 seconds @ 60 rpm

TypeHigh strength Brinell HB450 wear resistant steel

Turning Dimensions - Inside Radius153in

Turning Dimensions - Aisle Width210in

Turning Dimensions - SAE Turning Radius294in

Turning Dimensions - Clearance Radius318in

Turning Dimensions - Steer Angle - Left/Right45°

NoteDimensions are for machines equipped with 23.5R25 tires.

Wheel Loader: 950M - Passes5

Wheel Loader: 962M - Passes4-5

Wheel Loaders: 966M/966M XE - Passes4

Hydraulic Excavators: 336F/336F XE - Passes5-6

Wheel Loaders: 972M/972M XE - Passes3-4

Hydraulic Excavators: 349F/349F XE - Passes4-5

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Air conditioning with R134A refrigerant

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Windows opening both sides, tinted

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Tilt and telescopic steering wheel

Retractable belt: Operator seat and second seat

Adjustable air vents

Heater and defroster with four-speed fan

Sun visor

Touchscreen display incorporating the rearview camera video feed

Windshield wiper and washer, two speed, intermittent (front)

Combined gear selection and hoist control lever

Windshield wiper and washer, two speed (rear)

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS) ready
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Secondary steering – electro hydraulic

Mirrors: extensive arrangement for improved visibility

Standard

Product Link

Cat Detect with Stability Assist

Standard

Electrical system: 24-volt, 5A 24- to 12-volt converter

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Horn

Batteries (two) maintenance free

Remote starting receptacle (cables not included)

Standard

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Cat C9.3 engine

Three axle, six-wheel drive

Retarder: engine compression brake

Dual circuit oil immersed, enclosed brakes – all wheels

Auto shift six-speed forward and single speed reverse transmission

Standard

Reverse alarm

Rearview camera

ROPS/FOPS cab

Standard

Front dump body spill guard, integral part of fabricated body

Crankcase

Axle

Rear window

Radiator

Standard

Vandalism protection: lockable caps

Mud flaps: wheel arch and body mounted with transportation tiebacks

Sound suppression (only standard in Europe)

S·O·S sampling valves

Tires, six 23.5R25

Optional

Cold weather coolant –51° C (–60° F)

Infrared glass – high ambient cab

Auto lube installation for automatic greasing of bearings

Cold weather start attachment

Bare chassis (no body) standard wheel base

Roof mounted High Intensity Discharge (HID) work lights

Product Link Elite: PLE641 (cellular). Product Link is optional.

Heated/cooled seat

Exhaust heated body

Fuel additive – anti-waxing

Flashing LED beacon

Body liners

Ether start

Four-point seat belt

Machine Security System (MSS)

Cat Production Measurement payload monitoring system

Sound suppression (only standard in Europe)

Fast fuel fill

Wheel chocks

Engine block heater

Heated rearview motorized mirrors

Window blinds

Bluetooth radio stereo system

Scissor tailgate

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.

    Deals & Special

    Sales Tax Information

    MACHINE INFORMATION

    • Price: $500 sales tax on used equipment (160 Net HP and under)
    • Serial: (see §12-36-2110)
    • Current Hours: Used equipment purchased and picked up at a Blanchard location
    • Make: by buying in
    • Model: South Carolina!
    View All Deals and Specials
    Machine
    Deals & Special

    AFTERMARKET GET SPECIAL

    Match the Tip for the Job

    You’ve got options based on what you need your ground engaging tool (GET) tip for. Choose a tip that’s right for your task by balancing cost with the performance your application demands.

    Shop now at Parts.Cat.Com

    View All Deals and Specials
    Machine