854K Wheel Dozer

Engine ModelCat® C32 ACERT™

Gross Power907HP

Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995900HP

Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249814HP

Emissions (Tier 2 Equivalent): Gross Power - SAE J1995907HP

Emissions (Tier 2 Equivalent): Net Power ISO - 9249814HP

Rated Speed1750r/min

Bore5.7in

Stroke6.4in

Displacement1958in²

Peak Torque - 1,200 rpm3139lb/ft

Torque Rise30%

Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.

Note (2)Net torque rise meets SAE J139.

Note (3)No engine derating required up to 3050 m (10,000 ft) altitude.

Operating Weight224254lb

Transmission TypeCat Planetary Power Shift

Converter Drive - Forward 14.4mile/h

Converter Drive - Forward 27.7mile/h

Converter Drive - Forward 313.2mile/h

Converter Drive - Reverse 14.8mile/h

Converter Drive - Reverse 28.4mile/h

Converter Drive - Reverse 314.6mile/h

Direct Drive - Forward 1Lock-up disabled

Direct Drive - Forward 28.1mile/h

Direct Drive - Forward 314.2mile/h

Direct Drive - Reverse 15mile/h

Direct Drive - Reverse 28.9mile/h

Direct Drive - Reverse 315.6mile/h

NoteTravel speeds based on 45/65-45 L-5 46 ply tires.

Output at 1,850 rpm and 6900 kPa (1,000 psi)161gal/min

Cylinders, Double Acting - Lift, Bore and Stroke177 mm × 1760 mm (0.58 ft × 5.8 ft)

Cylinder, Double Acting - Tilt and Tip, Bore and Stroke267 mm × 286 mm (0.88 ft × 0.94 ft)

Relief Valve Setting - Lift (Large Pump)3289psi

Relief Valve Setting - Tilt (Small Pump)3560psi

Fuel Tank - Standard413gal (US)

Cooling System53gal (US)

Crankcase32gal (US)

Transmission45gal (US)

Differential - Final Drives - Front98gal (US)

Differential - Final Drives - Rear90gal (US)

Hydraulic System - Implement and Brakes - Tank Only81gal (US)

Hydraulic System - Steering and Engine Cooling Fan - Tank Only77gal (US)

FrontFixed

RearOscillating at ±10 degrees

Maximum Single-Wheel Rise and Fall22.6in

BrakesMeets ISO 3540:2011

Blade Capacities25 to 45 m³ (33 to 58 yd³)

Air ConditioningStandard air conditioning system contains environmentally friendly R134a refrigerant

Cab - ROPS/FOPS (1)Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.

Cab - ROPS/FOPS (2)SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005

ROPSROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.

FOPSFOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.

Sound Performance (1)The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.

Sound Performance (2)The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).

Sound Performance (3)Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.

Sound Performance (4)The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).

Minimum Turning Radius31ft

Total Steering Angle86°

Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)124gal/min

Relief Valve Setting5004psi

Serial Number PrefixKK6

Serial Number PrefixRM6

Height - Top of ROPS18.25ft

Height - Top of Exhaust Pipe17.17ft

Height - Top of Hood13ft

Ground Clearance27in

Centerline of Front Axle to Hitch9.67ft

Centerline of Rear Axle to Edge of Bumper13.75ft

Wheel Base19.25ft

Length - With Blade on Ground44ft

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Alarm, back-up

Alternator (150-amp)

Batteries, low maintenance

Deutsch & Amp Seal terminal connectors

ECM diagnostic connector

Ground level electrical disconnect

Ground level starting receptacle for emergency start

Lighting system, halogen (front and rear)

Lighting, access stairway

Starter, electric (heavy duty)

Starting and charging system (24-volt)

Optional

10A converter

HID lights

Object Detection

Rear vision camera

LED strobe warning beacons

Standard

Advisor display

Air conditioner and heater with automatic temperature control

Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 × 12V converters (24-volt, 10 amp) for use with laptop/cell phone

Cigar lighter and ashtray

Coat hook

Electro-hydraulic tilt and lift control system locks

Heater and defroster

Horn, electric

Implement and steering lockouts

VIMS 3G monitoring system:
– Action alert system, three category
– Instrumentation, gauges:
   · Engine Coolant Temperature
   · Fuel Level
   · Hydraulic Oil Temperature
   · Tachometer
   · Transmission Gear Indicator
   · Transmission Oil Temperature

Light, dome (cab)

Lunchbox and beverage holders

Mirrors, rearview (externally mounted)

Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats

Seat, Cat Comfort (cloth) air suspension

STIC control system

Tinted glass

Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers

Optional

AM/FM/CD/MP3 radio

Cab precleaner

Sirius/USB/Bluetooth Radio

Sun Screen

Standard

Air-to-Air After cooler (ATAAC)

Auto Idle Kickdown

Axle oil coolers (front and rear)

Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake

Case drain filters

Delayed Engine Shutdown

Demand fan

Electric fuel priming pump

Engine, Cat C32 ACERT

Ground level engine shutdown

Ground level fast fill fuel

Ground level transmission lockout

Ground level starter lockout

Idle Engine Shutdown

Precleaner, engine air intake

Next Generation Modular Radiator (NGMR)

Starting aid (ether), automatic

Throttle lock

Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control

Venturi Exhaust Stacks

Standard

Autolube

Automatic bucket lift/tilt kickouts, electronically adjustable from cab

Bumper service center

Couplings, Cat O-ring face seals

Doors, service access (locking)

Emergency platform egress

Fenders, steel (front and rear)

Grouped hydraulic pressure ports

Guards, power train and crankcase

Hitch, drawbar with pin

Hoses, Cat XT^™ and XT-ES

Hydraulic oil cooler

Impeller clutch

Implement and steering ecology drains

Mufflers, under hood

Oil sampling valves

Piston pump case drain filters

Electro-hydraulic blade controls

Product Link^™

Service center with ground level electrical and fluids service center

Sight gauges:
– Coolant level
– Implement oil level
– Steering oil level
– Transmission oil level

Starter lockout, bumper

Stairway, left and right rear access

Steering, load sensing

Toe kicks

Transmission lockout, bumper

Vandalism protection caplocks

Windshield cleaning platforms

Venturi Stack

Standard

A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.

Standard

Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)

Optional

Semi-U – 25.4 m³ (33.1 yd³)

HD Semi-U – 25.4 m³ (33.1 yd³)

Coal – 44.7 m³ (58.2 yd³)

Optional

Engine coolant 120V heater

Engine coolant 240V heater

Optional

CAES attachment ready option

Optional

Arctic Antifreeze for protection to –50° C (–58° F)

Diagnostic lines

Roading fenders