299D3 Compact Track Loader

Gross Power - SAE J199598HP

Net Power - SAE 134995HP

Displacement232in³

Bore3.9in

Stroke4.7in

Net Power95HP

Net Power - ISO 924995HP

Engine ModelCat C3.8 DIT (turbo)

Peak Torque - 1,500 rpm - SAE J1995246ft·lbf

Rated Operating Capacities - 35% Tipping Load3480lb

Tipping Load9945lb

Breakout Force - Tilt Cylinder7270lb

Breakout Force - Lift Cylinder6162lb

Rated Operating Capacity with Optional Counterweight5240lb

Ground Contact Area - With 400 mm/15.7 in Track2184in²

Ground Pressure - With 400 mm/15.7 in Track5.3psi

NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics,

Rated Operating Capacities - 50% Tipping Load4970lb

Ground Contact Area - With 450 mm/17.7 in Track2463in²

Ground Pressure - With 450 mm/17.7 in Track4.7psi

Operating Weight11464lb

Cooling System4.1Gal

Engine Crankcase3.5gal (US)

Fuel Tank31.7gal (US)

Hydraulic System14.5gal (US)

Hydraulic Tank10.3gal (US)

Diesel Exhaust Fluid (DEF) Tank5gal (US)

Length - Track on Ground69.6in

Overall Length - Track89.4in

Height - Top of Cab83.6in

Ground Clearance9.6in

Departure Angle33°

Maximum Dump Angle54°

Vehicle Width (450 mm/17.7 in tracks)78in

Turning Radius from Center - Coupler58.1in

Rack Back Angle - Maximum Height81°

Reach - Maximum Lift/Dump33.6in

Vehicle Width (400 mm/15.7 in tracks)76in

Bucket Pin Reach - Maximum Lift19.4in

Bucket Pin Height - Carry Position7.1in

Turning Radius from Center - Bucket (racked)91.1in

Maximum Reach - With Arms Parallel to Ground51.9in

Length - Without Bucket125.5in

Length - With Bucket on Ground154.7in

Clearance at Maximum Lift and Dump94.5in

Bucket Pin Height - Maximum Lift126.3in

Maximum Overall Height158.7in

Roll Back Angle25°

Turning Radius from Center - Machine Rear74in

ROPSISO 3471:2008

FOPSISO 3449:2005 Level I

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061psi

Hydraulic Flow - Standard - Loader Hydraulic Pressure3335psi

Hydraulic Flow - Standard - Hydraulic Power (Calculated)44HP

Hydraulic Flow - Standard - Loader Hydraulic Flow23gal/min

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32gal/min

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76HP

Travel Speed - Forward or Reverse - Two Speed8.4mile/h

Travel Speed - Forward or Reverse - One Speed5.2mile/h

Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Inside Cab*83dB(A)

Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Outside Cab**104dB(A)

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Standard

12 volt Electrical System

100 ampere Alternator

Ignition Key Start/Stop Switch

Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light

Backup Alarm

Heavy Duty Battery, 850 CCA

Standard

Gauges: Fuel Level, DEF Level, Hour Meter

Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System

Adjustable Vinyl Seat

Fold In Ergonomic Contoured Armrest

Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

ROPS Cab, Open, Tilt Up

FOPS, Level I

Top and Rear Windows

Floor Mat

Interior Rearview Mirror

12 volt Electric Socket

Horn

Hand (Dial) Throttle, Electronic

Adjustable Joystick Controls

Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control

Storage Compartment with Netting

Standard

Cat C3.8, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards

Air Cleaner, Dual Element, Radial Seal

S·O·SSM Sampling Valve, Hydraulic Oil

Filters, Cartridge-type, Hydraulic

Filters, Canister-type, Fuel and Water Separator

Radiator/Hydraulic Oil Cooler (side-by-side)

Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brakes

Hydrostatic Transmission, Two Speed Travel

Suspension – Independent Torsion Axles (4)

Standard

Engine Enclosure, Lockable

Extended Life Antifreeze, –37° C (–34° F)

Machine Tie Down Points (6)

Support, Lift Arm

Hydraulic Oil Level Sight Gauge

Radiator Coolant Level Sight Gauge

Radiator, Expansion Bottle

Cat ToughGuard^™ Hose

Auxiliary, Hydraulics, Continuous Flow

Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release

Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm

Electrical Outlet, Beacon

Belly Pan Cleanout

Variable Speed Demand Fan

Product Link^™ PL240, Cellular

Standard

Hydraulics, Standard or High Flow XPS

Quick Coupler, Mechanical or Powered

High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)

Steel Imbed Rubber Track – 400 mm (15.7 in) or 450 mm (17.7 in)

Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers

PERFORMANCE PACKAGE (must select one of the following):
– Performance Package H1: Standard Flow (No Self Level)
– Performance Package H2: Standard Flow, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow XPS, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)

COMFORT PACKAGE (must select one of the following):
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner

Optional

External Counterweights

Beacon, Rotating

Engine Block Heater – 120V

Oil, Hydraulic, Cold Operation

Paint, Custom

Heavy Duty Battery, 850 CCA, with Battery Disconnect

Heavy Duty Battery, 1,000 CCA, with Battery Disconnect

Product Link PL641, Cellular

Variable Speed Demand Fan with Reversing Functionality

Speed Sensitive Ride Control

Work Tool Return to Dig and Work Tool Positioner