Maximum Gross Power168HP
Displacement (Standard Power Mode: Range 1-3**)428in³
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)160HP
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)162HP
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)573ft·lbf
Maximum Rated Gross Power - ISO 14396 (metric)170mhp
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)601ft·lbf
Stroke - Performance Power Mode: Range 1-45.3in
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800r/min
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)797N·m
Displacement (Performance Power Mode: Speed Range 1-4)428in³
EmissionsEngine meets U.S. EPA Tier 4 Final emission standards.
Engine ModelCat® C7.1
Note (4)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Rated Gross Power - ISO 14396168HP
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)170HP
Note (2)**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)168HP
Note (1)*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Bore (Standard Power Mode: Range 1-4)4.1in
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)156HP
Stroke (Standard Power Mode: Range 1-3**)5.3in
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)156HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)1600r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)164HP
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)158HP
Bore (Standard Power Mode: Range 1-3**)4.1in
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)587ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)795N·m
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)776N·m
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)163HP
Operating Weight31382lb
Bucket Capacities2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material3.1-5.0 m³ (4.0-6.5 yd³)
ROPSISO 3471:2008
FOPSISO 3449:2005 Level II
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*101dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*68dB(A)
Note (1)*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.5turns
Maximum Flow - Steering Pump34gal/min
Steering Cylinder, Double Acting - Bore Diameter2.8in
Steering Cylinder, Double Acting - Stroke17.2in
Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump3500psi
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited2.8s
Steering Articulation Angle - Each Direction40°
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.4s
Steering Cylinder, Double Acting - Rod Diameter1.6in
Relief Pressure - Tilt Cylinder4351psi
Cycle Times - 1,600 rpm - Standard: Total Cycle Time10.1s
Maximum Flow - Implement Pump50gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*42gal/min
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)1.5s
Note*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time9.3s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)2.7s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)5.1s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)2.7s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure4061psi
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)1.7s
Maximum Working Pressure - Implement Pump4061psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure4351psi
Note (1)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)5.7s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*50gal/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter4.3in
Tilt Cylinder: Standard Lift Linkage - Stroke21.9in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter2.8in
Lift Cylinder: Standard Lift Linkage - Rod Diameter2.4in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter5.1in
Lift Cylinder: Standard Lift Linkage - Stroke28.7in
Standard Size20.5 R25, radial (L-3)
Note (2)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)Other tire choices are available. Contact your Cat dealer for details.
Other Choices Include20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Transmission - Gear Box2.2gal (US)
Cooling System7.9gal (US)
Diesel Exhaust Fluid (DEF) Tank5gal (US)
Fuel Tank51.5gal (US)
Axles - Rear6.6gal (US)
Hydraulic System - Including Tank43.6gal (US)
Engine Crankcase5.3gal (US)
Axles - Front6.9gal (US)
Hydraulic Tank23.8gal (US)
Note*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Rear AxleOscillating
Note (2)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front AxleFixed
Front Axle - Traction Aid*Locking differential standard
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25± 10.5 degrees
Brakes - ServiceInboard wet disc
Rear Axle - Traction AidLimited slip differential optional
Brakes - ParkingSpring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65± 7 degrees
Forward - Range 28mile/h
Forward - Range 1*1-13 km/h (0.6-8 mph)
Reverse - Range 425mile/h
Reverse - Range 28mile/h
NoteCreeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Forward - Range 317mile/h
Forward - Range 425mile/h
Reverse - Range 317mile/h
Reverse - Range 1*8mile/h
Full Turn Tip Load19424lb
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
RearOscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
FrontFixed; Locking differential (standard)
Height - Ground Clearance**1.3ft
Rack Angle at Carry43°
Departure Angle33°
Length - Wheel Base9.8ft
Length - Rear Axle to Bumper6.5ft
Turning Radius - Over Bucket19.5ft
Carry Height - Bucket Pin1.3ft
Width - Over Tires8.3ft
Note (2)**Vary with tire.
Dig Depth**3.9in
Turning Radius - Outside of Tires17.7ft
Clearance - Level Bucket**11.75ft
Clearance - Bucket at 45°*9.1ft
Rack Angle at Full Lift54°
Height - Overall**17.1ft
Width - Bucket8.4ft
Height - Ground to Axle Center**2.25ft
Height - Bucket Pin**12.8ft
Operating Weight31125lb
Width - Tread Center6.3ft
Turning Radius - Inside of Tires9.4ft
Reach - Bucket at 45°*3.6ft
Length - Overall*24.9ft
Clearance - Load over Height**10.9ft
Length - Hitch to Front Axle4.9ft
Height - Ground to Beacon**12.2ft
Articulation Angle40°
Height - Ground to Cab**10.9ft
Note (3)Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)*Vary with bucket.
Dump Angle at Full Lift48°
Length - Rear Axle to Bumper6.5ft
Departure Angle33°
Height - Overall**18.7ft
Reach - Bucket at 45°*4.4ft
Dump Angle at Full Lift48°
Width - Bucket8.4ft
Length - Wheel Base9.8ft
Width - Tread Center6.3ft
Length - Hitch to Front Axle4.9ft
Height - Ground to Axle Center**2.25ft
Note (1)*Vary with bucket.
Clearance - Bucket at 45°*10.7ft
Height - Bucket Pin**14.4ft
Height - Ground to Beacon**12.2ft
Carry Height - Bucket Pin1.9ft
Clearance - Load over Height**11.6ft
Turning Radius - Outside of Tires17.7ft
Turning Radius - Over Bucket20.6ft
Rack Angle at Full Lift51°
Rack Angle at Carry47°
Length - Overall*27ft
Note (2)**Vary with tire.
Height - Ground to Cab**10.9ft
Turning Radius - Inside of Tires9.4ft
Clearance - Level Bucket**13.4ft
Width - Over Tires8.3ft
Note (3)Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dig Depth**5.3in
Articulation Angle40°
Operating Weight31441lb
Height - Ground Clearance**1.3ft
Recyclability94%
