826 Landfill Compactor

Gross Power - SAE J1995:2014435hp

Net Power - SAE J1349:2011405hp

Net Power - ISO 9249:2007405hp

Engine Power - ISO 14396:2002426hp

Engine ModelC15 Cat®

EmissionsU.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA

Rated Speed1800

Torque Rise33%

Bore5.4in

Stroke6.7in

Displacement927.6in³

High Idle Speed2300r/min

Low Idle Speed800r/min

Maximum Altitude – Without Derating (Tier 4 Final/Stage V)9298ft

Maximum Altitude - Without Derating (Tier 3/Stage IIIA)9098ft

NoteNet power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Weight (Tier 4 Final/Stage V)90207lb

Operating Weight (Tier 3/Stage IIIA equivalent)89186lb

Maximum Operating Weight (Tier 4 Final/Stage V)92568lb

Maximum Operating Weight (Tier 3/Stage IIIA equivalent)91549lb

Transmission TypePlanetary - Powershift - ECPC

Direct Drive - Forward 14.2mile/h

Direct Drive - Forward 27.5mile/h

Direct Drive - Reverse 14.3mile/h

Direct Drive - Reverse 28.6mile/h

Pump Flow at 1800 rpm30.9gpm

Main Relief Pressure3771psi

Maximum Supply Pressure3495psi

Lift SystemDouble Acting Cylinder

Bore4.7in

Stroke42.1in

Cooling System30.6gal (US)

Engine Crankcase9gal (US)

Transmission17.4gal (US)

Fuel Tank206.6gal (US)

Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)8.5gal (US)

Differential - Final Drives - Front26.4gal (US)

Differential - Final Drives - Rear29.1gal (US)

Hydraulic Tank Only35.4gal (US)

NoteCat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H

FrontPlanetary - Fixed

RearPlanetary - Oscillating

Oscillation Angle±5°

Service BrakesMulti Disc Wet (Enclosed) 2 WHL

Parking BrakeDrum and Shoe, Spring Applied, Hydraulic Released

Operator Sound Pressure Level (ISO 6396:2008)73dB(A)

Machine Sound Power Level (ISO 6395:2008)113dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*72dB(A)

Machine Sound Power Level (ISO 6395:2008)*110dB(A)

Note (1)* Sound suppression equipped

Note (2)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (3)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (4)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Operator Sound Pressure Level (ISO 6396:2008)73dB(A)

Machine Sound Power Level (ISO 6395:2008)113dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*72dB(A)

Machine Sound Power Level (ISO 6395:2008)*110dB(A)

Note (1)* Sound suppression equipped

Note (2)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (3)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (4)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Steering System - CircuitPilot operated, load sensing

Bore4.5in

Stroke22.7in

Steering System - PumpPiston - Variable Displacement

Maximum System Flow170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)

Steering Pressure Limited3481psi

Vehicle Articulation Angle86°

Height to Top of Air Conditioning Condenser14.99ft

Height - Cab Roof13.75ft

Height - Top of Beacon15.63ft

Height - Top of Exhaust Pipe14.56ft

Height - Top of Hood10.87ft

Ground Clearance - Bumper3.15ft

Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard9.38ft

Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard10.16ft

Hitch to Centerline of Front Axle6.07ft

Wheel Base12.14ft

Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard28.59ft

Ground Clearance2.11ft

Width - Over Wheels12.47ft

Turning Radius - Inside of Wheels9.18ft

Width – Moldboard Length14.16ft

Width - Over End Bits14.75ft

Height with Cutting Edge and Screen6.23ft

Maximum Depth of Cut1.5ft

Maximum Lift above Ground4.19ft

Capacity, Rated16.1yd³

Overall Machine Length (includes rear radiator guard, measured to cutting edge)28.59ft

Width – Moldboard Length14.66ft

Width - Over End Bits14.83ft

Height with Cutting Edge and Screen6.63ft

Maximum Depth of Cut2.03ft

Maximum Lift above Ground3.825ft

Capacity, Rated20.9yd³

Overall Machine Length (includes rear radiator guard, measured to cutting edge)29.54ft

Width – Moldboard Length14.25ft

Width - Over End Bits14.41ft

Height with Cutting Edge and Screen6.62ft

Maximum Depth of Cut2.03mm

Maximum Lift above Ground3.79ft

Capacity, Rated22.9yd³

Overall Machine Length (includes rear radiator guard, measured to cutting edge)30.7ft

Combination Tips (Weight Group)21125lb

Plus Tips - Weight (Group)22002lb

Paddle Tips - Weight (Group)20540lb

Diamond Tips Weight (Group)23997lb

Outside Diameter77.6in

Outside Diameter - Diamond78.1in

Drum Diameter63.4in

Drum Width47.2in

Feet Per Row6

Feet Per Wheel30

ReplaceableWeld On

Width Over Drums3800mm

Tip Height179mm

Tip Height - Diamond7.25in

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Single Clutch Speed Shifting (SCSS)

Electronic Clutch Pressure Control (ECPC)

Air-to-air aftercooler

Brakes, full hydraulic, enclosed, wet multiple disc service brakes

Cat Clean Emission Module (U.S. EPA Tier 4 Final/ EU Stage V only)

Muffler (under hood) (U.S. EPA Tier 3/EU Stage IIIA equivalent)

Electro-hydraulic parking brake

Engine, Cat C15 configured for two emissions options: Tier 4 Final/Stage V, or emitting equivalent to Tier 3/Stage IIIA

Fuel priming pump (electric)

Fuel-to-air cooler

Ground level engine shutdown

Heat shield, turbo and exhaust manifold

Hydraulically driven demand fan

Integrated braking system

Radiator, Aluminum Modular (AMR)

Separated cooling system

Starting aid (ether)

Throttle lock

Torque converter with Lock Up Clutch (LUC)

Eco Mode

Transmission, planetary, with 2F/2R speed range control

Under hood ventilation system

Optional

Heater, engine coolant, 120V

Heater, engine coolant, 240V

Standard

Alarm, back-up

Alternator, 150 amp

Batteries, maintenance-free (4 - 1,000 CCA)

Electrical system, 24V

Light, warning unswitched (LED strobe)

Lighting system, halogen (front and rear)

Lighting, access stairway

Lighting, underhood

Starter, electric (heavy duty)

Ground level lockable master disconnect switch

Auxiliary jump start receptacle

Standard

Camera, rear vision

Air conditioner with roof-mounted condenser

Cab, sound-suppressed pressurized

Internal four-post rollover protective structure (ROPS/FOPS)

Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)

12V power port for mobile phone or laptop connection

Radio, CB ready

Coat and hard hat hooks

Fingertip shifting controls

Flip-up armrest

Heater and defroster

Implement hydraulic lockout

Glass (window) - rubber mounted glass

Light, (dome) cab

Lunch box and beverage holders

Instrumentation, gauges: – Diesel exhaust fluid (DEF) level (U.S. EPA Tier 4 Final/ EU Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature

Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status

Mirror, internal (panoramic)

Mirrors, heated, rearview (externally mounted)

Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish

Seat belt with minder, retractable, 76 mm (3 in) wide

Steering and Transmission Integrated Control (STIC^™) system with lockout

Sun visor, front

Tinted glass

Transmission gear (indicator)

Vital Information Management System (VIMS^™): – Graphical information display – External data port – Customizable operator profiles

Wet-arm wipers/washers (front and rear)

Intermittent wipers (front and rear)

Precleaner, cab powered

Horn group (trumpet)

Optional

Radio, AM/FM/Aux/USB/Bluetooth^®

Cat Compact SBAS Mapping (available through SITECH only)

Cat Compact RTK Mapping (available through SITECH only)

Standard

Guards, axle (front and rear)

Guard, cab window

Guard, driveshaft

Guards, crankcase and powertrain, hydraulically powered

Guard, differential (front and rear)

Optional

Guard – rear fan and grill

Standard

Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)

Standard

Demand fan/swing out (hydraulic reversible)

Doors, service access (locking)

Ecology drains for engine, radiator, transmission, hydraulic tank

Emergency platform exit

Engine, crankcase, 500 hour interval with CJ-4 oil

Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown

Fire suppression ready

Fuel tank, 782 L (207 gal)

Hitch, drawbar with pin

Hoses, Cat XT^™

Hydraulic, engine, and transmission oil coolers

Total hydraulic filtration system

Oil sampling valves

Oil change system, high speed

Steering, load sensing

Stairway, left and right rear access

Vandalism protection caplocks

Venturi stack

Fold-down exhaust stack for shipping

Optional

Stairway, swingout (LH & RH)

Standard

Product Link^™ – Cellular, Satellite

Standard

Engine: – Sound suppression

Engine precleaners - single stage

Optional

Engine precleaners – dual stage

Standard

Dozer arrangement (no blade)

Standard

Striker bars

Wheels and tips: wheel arrangements – 7" combination tips

Optional

Striker bars with cleaner fingers

Optional

Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)