2022 Cat 336-07GC

Price: $320,000

  • Location POINTE-CLAIRE, QC

    Current Hours2900

  • Serial # GSF20347

    MakeCat

  • Unit NumberOKL7089831

    Model336-07GC

Unit Number : OKL7089831

Model 336-07GC

Serial Number GSF20347

Year 2022

Hours 2900

City POINTE-CLAIRE

State QC

Country CA

Rating Good

Certification None

Price $320,000

  • Boom - 1 Piece
  • Bucket
  • Car Body - Standard
  • Combined Hydraulics
  • Hand And Foot Control
  • Lighting
  • Machine Powertrain Warranty Until 18 November 2026 Or 6000 Hrs
  • Radio
  • Stick - Long
  • Straight Travel Pedal
  • This Unit Is Not Available To Export From Canada By Cat Financial. Units Sold In Canada Must Be Exported By A Local Canadian Cat Dealer. Contact Your Local Cat Dealer With Questions
  • Thumb Type - Hydraulic
  • Undercarriage, Long

Cleaning Required Yes

Extra Fuel Tanks No

Bumper Good

Car Body Fair

Catwalk Good

Counterweight Good

Crankcase Guard / Battery Box Good

Decals Fair

Draw Bar Good

Eng. Enclose Hood / Stack Fair

Engine Doors Fair

Fenders Good

Fiberglass Good

Fuel Tank Fair

Grab Irons Good

Hood Good

Main Frame Welds Fair

Paint Good

Plastic Good

Pre-Cleaner Bowl Good

Radiator Grill & Shroud Fair

Sheet Metal Good

Steps / Ladder Poor

ROPS No

ROPS Certification Plate No

Safety Decals In Place Yes

Safety Decals Legible Yes

Horn Good

Rig Saver Good

Secondary Exit Good

Current O&MM No

Current Parts Manual No

Current Safety Manual No

Air Conditioner Poor

Dash Console Good

Gauges Good

Interior Lights Good

Switches Good

Windshield Wipers Good

Blow By No

Knocking No

Oil Leaks Yes

Water in Oil No

Fuel Injection System Good

Governor Good

Operating Condition - ENGINE Good

Turbocharger / Blower Good

Compression in Radiator No

Coolers Good

Fan Good

Radiator Good

Water Pump Good

Block Heater Yes

Ether Aid Yes

Alternator Good

Lighting Poor

Pre-Heater Good

Starter Good

Wiring Good

Boom Cylinder Good

Bucket Cylinder Good

Control Linkage Good

Hose Lines Good

Hydraulic Swivel Good

Operating Condition - HYDRAULICS Poor

Pump Drive Good

Pumps & Valves Poor

Stick Cylinder Good

Swing Gear Good

Swing Motors Good

Tank Fair

Thumb Cylinder Good

Travel Motors Good

Auger No

Claw No

Crusher No

Grapple No

Hammer No

Pulverizer No

Rake No

Ripper No

Shear No

Thumb Yes

Tilting Ditch Bucket No

Vibratory Plate No

Boom Condition Good

Boom Pins Good

Pins & Bushings - BOOM Good

Pins & Bushings - STICK Good

Stick Conditions Good

Stick Pins Good

Quick Coupler No

Bucket Bottom Good

Bucket Linkage Good

Bucket Mounts Good

Bucket Sides Good

Teeth / Adapters Good

Pins & Bushings Turned? No

Track Frame - Left Good

Track Frame - Right Good

Carrier Rollers Front Left: 0.237 Measurement, Left: 100% Worn, Left: 0 Total Potential Hours, Right: 0.511 Measurement, Right: 100% Worn, Right: 0 Total Potential Hours

Carrier Rollers Rear Left: 0.393 Measurement, Left: 100% Worn, Left: 0 Total Potential Hours, Right: 0.339 Measurement, Right: 100% Worn, Right: 0 Total Potential Hours

Idlers Front Left: 0.863 Measurement, Left: 24% Worn, Right: 0.860 Measurement, Right: 24% Worn

Idlers Rear Left: 0.867 Measurement, Left: 24% Worn, Right: 0.862 Measurement, Right: 24% Worn

Links Left: 1.240 Measurement, Left: 45% Worn, Right: 1.253 Measurement, Right: 45% Worn

Pins & Bushings (External) Left: 0.403 Measurement, Left: 35% Worn, Right: 0.401 Measurement, Right: 35% Worn

Pins & Bushings (Internal) Left: NA Measurement, Right: NA Measurement

Segments Left: NA Measurement, Left: 35% Worn, Right: NA Measurement, Right: 35% Worn

Track Roller 1 Left: 1.853 Measurement, Left: 10% Worn, Right: 1.846 Measurement, Right: 10% Worn

Track Roller 10 Left: NA Measurement, Right: NA Measurement

Track Roller 11 Left: NA Measurement, Right: NA Measurement

Track Roller 12 Left: NA Measurement, Right: NA Measurement

Track Roller 2 Left: 1.894 Measurement, Left: 10% Worn, Right: 1.889 Measurement, Right: 10% Worn

Track Roller 3 Left: 1.884 Measurement, Left: 10% Worn, Right: 1.890 Measurement, Right: 10% Worn

Track Roller 4 Left: 1.829 Measurement, Left: 10% Worn, Right: 1.892 Measurement, Right: 10% Worn

Track Roller 5 Left: 1.870 Measurement, Left: 10% Worn, Right: 1.897 Measurement, Right: 10% Worn

Track Roller 6 Left: 1.845 Measurement, Left: 10% Worn, Right: 1.855 Measurement, Right: 10% Worn

Track Roller 7 Left: 1.870 Measurement, Left: 10% Worn, Right: 1.879 Measurement, Right: 10% Worn

Track Roller 8 Left: 1.790 Measurement, Left: 14% Worn, Right: 1.825 Measurement, Right: 10% Worn

Track Roller 9 Left: NA Measurement, Right: NA Measurement

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    *If you wish to be removed from receiving future communications, you can opt-out by texting STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, or UNSUBSCRIBE. Message and data rates may apply based on your mobile carrier’s plan. By opting into SMS communications from Blanchard Machinery, you agree to receive recurring text messages regarding account updates, order notifications, delivery notifications, and general support.


    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.