6015 Hydraulic Shovel

6015 Hydraulic Shovel

The next generation Cat® 6015 Hydraulic Shovel lets you move more material at a low cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With high tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. And it’s offered with more and better options that let you match your machine to your operation — from access and cold weather packages to multiple stick and track pad options. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

Request a Quote

Engine Output - SAE J1995824hp

Bucket Payload16.1ton (US)

Operating Weight154.3ton (US)

NoteSpecifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.

Engine ModelCat® C27

Gross Power - SAE J1995824hp

Net Power - SAE J1349812hp

Number of Cylinders12

Bore5.4in

Stroke6in

Displacement1648in³

Engine ModelCat® C27

Gross Power - SAE J1995839hp

Net Power - SAE J1349829hp

Number of Cylinders12

Bore5.4in

Stroke6in

Displacement1648in³

AspirationTurbocharged and air-to-air aftercooled

Operating Weight154ton (US)

Ground Pressure23.6psi

NoteOperating weight includes: 700 mm (28 in) track pads, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants

Operating Weight308000lb

Standard28in

Wide35in

Extra Wide39in

Number of Shoes - Each Side46

Number of Track Rollers - Each Side9

Number of Carrier Rollers - Each Side3

Track PadsHeavy Duty (HD) with double grouser

Travel Speed - Two Stages - 1st Stage - Maximum1.6mile/h

Travel Speed - Two Stages - 2nd Stage - Maximum2.3mile/h

Maximum Drawbar Pull - Forward192886lbf

Maximum Drawbar Pull - Reverse220987lbf

Gradeability - Travel DrivesApproximately 42%

Hydraulic Track TensioningWith accumulator

Maximum Drawbar Pull179847lbf

Fuel Tank449gal (US)

Cooling System44gal (US)

Engine Oil23gal (US)

Swing Drive2.4gal (US)

Hydraulic System - Including Tank463gal (US)

Hydraulic Tank253gal (US)

Grease Tank57gal (US)

System Voltage24 V

Batteries4 × 200 Ah (12 V each)

Alternator Rating150 A (24 V) in total

Components (1)Emergency stop switches: one in cab, three in engine module, one pull rope accessible from ground level

Components (2)Four maintenance free batteries

Components (3)Lockable battery isolation switch

Components (5)14 LED high-brightness working lights

Components (4)5 LED service lights

Components (6)2 electric horns

Components (7)Two (2) lights for rear end

Components (9)One (1) beacon light on cabin roof

Components (8)One (1) light for machine deck/service

Main Pumps3 × variable swash plate pumps

Main Pumps - Maximum Total Oil Flow407gpm

Main Pumps - Maximum Pressure - Attachment4641psi

Pilot Pump - Maximum Flow, Pilot40.4gpm

Pilot Pump1 × gear pump

Pilot Pump - Maximum Pressure, Pilot1378psi

Main Pumps - Maximum Pressure - Travel4641psi

Engine Fan Pump - Maximum Flow, Engine Fan53.1gpm

Engine Fan Pump - Maximum Pressure, Engine Fan3191psi

Swing Pump1 × variable swash plate pump

Engine Fan Pump1 × variable swash plate pump

Swing Pump - Maximum Flow - Swing127gpm

Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan1958psi

Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan22.7gpm

Hydraulic Fan Pump1 × variable swash plate pump

Swing Pump - Maximum Pressure - Swing5294psi

Hydraulic Oil Cooling - Maximum Flow284gpm

Hydraulic Oil Cooling - Diameter of Fan46in

Filters (1)Full-flow high-pressure filters (200 μm) for main pumps

Filters (2)Full-flow filters (20 μm), return circuit

Filters (3)Pressure filters (16 μm), servo circuit

Filters (4)Full-flow filters (6 μm), cooling return circuit

Filters (5)Swing charge filter (15 μm)

Filters (6)Pump case return screens (125 μm)

Swing DriveTwo (2) compact planetary transmissions with axial piston motors

Parking BrakeWet multiple disc brake, spring-loaded/hydraulically released

Maximum Swing Speed4.9r/min

Swing RingTriple-race roller bearing with sealed internal greasing

Features (1)Closed-loop with torque control

Features (2)Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking

Features (3)All raceways and the internal gearing of swing ring supplied by automatic central lubrication system

EmissionsU.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1

FeatureAccessible from ground level for diesel fuel and grease

Equipped With (1)One pull rope emergency stop

Equipped With (2)Quick couplings for: diesel fuel and grease

Travel Speed - Two Stages - 1st Stage - Maximum1.6mile/h

Travel Speed - Two Stages - 2nd Stage - Maximum2.3mile/h

Maximum Tractive Force197157lbf

Maximum Drawbar Pull - Reverse220987lbf

Gradeability - Travel Drives38°/78% (SAE J1309)

Number of Shoes - Each Side46

Hydraulic Track TensioningWith accumulator

Number of Track Rollers - Each Side9

Number of Carrier Rollers - Each Side3

Components (1)Heavy Duty (HD) with double-grouser track pads

Components (2)Chain links connected by hardened pins and bushings

Components (3)Postive Pin Retention (PPR2) sealed and greased track design

Components (4)Hardened running surfaces of sprockets, idlers, rollers and track chain links

Components (5)Fully hydraulic self-adjusting track tensioning system with accumulator

Components (6)Automatic hydraulic retarder valve

Components (7)Acoustic travel alarm (forward and reverse)

Components (1)Pressurized cab with positive filtration

Components (2)Heated cab mirror

Components (3)Sliding upper door window

Components (4)Glass-breaking safety hammer

Components (5)Removeable lower windshield within cab storage

Components (6)Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM

Components (7)Beverage holder

Components (8)Literature holder

Components (9)AM/FM radio

Components (10)FM/AM radio with MP3 auxiliary port

Components (11)Two stereo speakers

Components (12)Storage shelf suitable for lunch or toolbox

Components (13)Color LCD display with service parameters, event and diagnostic annunciation, preventative maintenance, trip total, lifetime totals. Gauges for engine speed, engine oil pressue, and hydraulic oil temperature

Components (14)Head and arm rests

Components (15)Independently adjustable seat consoles with integrated joysticks

Components (16)Neutral lever (lock out) for all controls

Components (17)Travel control pedals with removable hand levers

Components (18)Two power outlets, 10 amp (total)

Components (19)Laminated front upper window and tempered glass other windows

Capacity - Grease Barrel18gal (US)

Type (1)Central bank lubrication system

Type (2)Grease is automatically applied to all attachment pivot points, slew bearing, and bucket linkage

Type (3)Standard grease reel on machine for bucket linkage

Type (4)Grease refill service point accessible from ground

Type (1)Boom and stick torsion-resistant with welded box design

Type (2)High-tensile steel with solid steel castings at pivot areas

Type (3)Boom and stick stress-relieved after welding

Type (4)Float valve for boom down function

Buckets Equipped With– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds

Maximum Digging Depth26.3ft

Maximum Digging Reach45.6ft

Maximum Digging Height41.9ft

Maximum Dump Height27.9ft

Bucket Digging Force - SAE112600lbf

Bucket Digging Force - ISO120947lbf

Stick Digging Force - ISO104761lbf

Stick Digging Force - SAE98800lbf

Capacity 1:110.6yd³

Total Width8.8ft

Number of Teeth5

Tooth SystemCat C70 or M75

Weight - Including Standard Wear Package18521lb

Maximum Material Density - Loose3030lb/yd³

Standard

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Standard

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Standard

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Standard

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Standard

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Standard

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Standard

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Standard

Cat Product Link Elite (Cellular)

Cat MineStar Solutions Ready

Standard

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Standard

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Standard

ISO or ANSI decals

Optional

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

Optional

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

Optional

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

Optional

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

Optional

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

Optional

Additional buckets available, based on application, through your local Cat dealer

Coming Soon

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    *If you wish to be removed from receiving future communications, you can opt-out by texting STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, or UNSUBSCRIBE. Message and data rates may apply based on your mobile carrier’s plan. By opting into SMS communications from Blanchard Machinery, you agree to receive recurring text messages regarding account updates, order notifications, delivery notifications, and general support.


    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.