D2 Dozer

Engine ModelCat® C3.6

Power - Net92hp

Displacement220in³

Net Power - 2,200 rpm - SAE J134992hp

Net Power - 2,200 rpm - ISO 9249/EEC 80/126992hp

Note (1)Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Note (2)All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Operating Weight18382lb

Operating Weight18382lb

Operating Weight - LGP19066lb

Note (2)For machine with ripper, add 554 kg (1,222 lb).

Note (1)Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Drive Pumps1

Maximum Travel Speed - Forward5.6mile/h

Relief Valve Settings7033psi

Maximum Travel Speed - Reverse6.2mile/h

Track Motors2

Pump Output17.2gpm

Relief Valve Settings2988psi

TypeParallelogram

Number of Shanks3

Height6.5in

Weight1222lb

Maximum Digging Depth13.3in

Maximum Ground Clearance Under Tip17.6in

Overall Width67.3in

Maximum Reach - Ground Line30.2in

Power Train Hydrostatic

FOPSISO 3449:2005 Level II

ROPSISO 3471:2008

Length - Track on Ground - LGP89in

Track Gauge61in

Number of Rollers - Each Side7

Track Gauge - LGP68in

Ground Pressure - LGP4.3psi

Shoe Width - Standard18in

Shoe Width - LGP25in

Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage43

Number of Shoes - Each Side - Abrasion Undercarriage 38

Ground Pressure 5.7psi

Length of Track on Ground 89in

Fuel Tank51.5gal (US)

Crankcase - With Filter2.8gal (US)

Final Drive - Each - LGP2.6gal (US)

Cooling System5gal (US)

Transmission - Hydraulic Tank23.8gal (US)

Diesel Exhaust Fluid (DEF) Tank4.9gal (US)

Final Drives - Each Side 2.6gal (US)

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 14

BLADE: Digging Depth - LGP23.2in

BLADE: Blade Cutting Edge Angle, Adjustable - LGP52° to 58°

BLADE: Blade Lift Height - LGP27.9in

BLADE: Blade Width - LGP124in

BLADE: Blade Width at Maximum Angle - LGP113.1in

Track Gauge - LGP67.9in

Ground Clearance - LGP13in

BLADE: Blade Height - LGP35.8in

Overall Length - With Blade - LGP168.2in

BLADE: Blade Capacity (SAE) - LGP2.42yd³

BLADE: Maximum Tilt - LGP17.2in

BLADE: Maximum Angle (either side) - LGP25°

NoteAbrasion Undercarriage

Length of Basic Dozer (without blade) - LGP129.5in

Width of Dozer (standard shoes, no blade) - Standard79.1in

Dozer Height - LGP108.9in

Dozer Height - Standard108.9in

Width of Dozer (standard shoes, no blade) - LGP92.9in

Length of Basic Dozer (without blade) - Standard129.5in

BLADE: Maximum Angle (either side) - Standard 25°

Ground Clearance - Standard 13in

Overall Length - With Blade - Standard 168.5in

BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58°

BLADE: Maximum Tilt - Standard 15.2in

Track Gauge - Standard 61in

BLADE: Digging Depth - Standard 23.3in

BLADE: Blade Width - Standard 109.5in

BLADE: Blade Lift Height - Standard 29.3in

BLADE: Blade Capacity (SAE) - Standard 2.59yd³

BLADE: Blade Width at Maximum Angle - Standard 100.1in

Note With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

BLADE: Blade Height - Standard 39.8in

Winch driveHydrostatic

Maximum line pull – bare drum40000lb

Drum capacity – recommended cable371ft

Winch length27.76in

Overall width29.2in

ControlHydraulic

Maximum line speed – bare drum131ft/min

Maximum line speed – full drum207ft/min

Drum width10.8in

Drum capacity – optional256ft

Throat clearance6.75in

Weight1345lb

Rope diameter – recommended0.63in

SpeedVariable

Maximum line pull – full drum25000lb

Drum diameter10in

Rope diameter – optional0.75in

Maximum Line Speed - Full Drum79ft/min

Maximum Line Speed - Bare Drum50ft/min

Weight1747lb

Drum Capacity - Optional Cable195ft

Rope Diameter - Recommended0.63in

Winch DriveHydraulic

Rope Diameter - Optional0.75in

Drum Capacity - Recommended Cable277ft

Maximum Line Pull - Full Drum20350lb

SpeedVariable

Maximum Line Pull - Bare Drum32150lb

ControlHydraulic

Overall width27.91in

Drum Width9.65in

Drum Diameter8in

Winch Length35.63in

Throat Clearance5.6in

Standard

Air cleaner with precleaner, automatic dust ejection and under hood intake

Aluminum bar plate cooling system (radiator, power train)

Automatic traction control

Cat C3.6 diesel engine

Drive, auxiliary

Dual path, closed loop, hydrostatic transmission

Electric fuel pump

Fuel/water separator

Turbocharged aftercooled

Optional

Air cleaner with external precleaner

Installation, winch

Standard

Alarm, backup

Alternator, 150 amp, heavy duty

Batteries, heavy duty, maintenance free, 1,000 CCA

Diagnostic connector

Four integrated front halogen lights, two rear halogen

Horn, electric

Starter, electric, 12 V, heavy duty

Optional

Four integrated front LED lights, two rear LED

Standard

Heavy Duty (HD) Undercarriage (43 section)

Carrier rollers

Guards, front/rear guiding

Seven roller track frame

Track adjusters, hydraulic

Track rollers, lifetime lubricated

Optional

Abrasion Undercarriage (38 section)

Track Pairs
– Track, 460 mm (18 in)
– Track, 635 mm (25 in)

Standard

Hydraulic pump and oil

Single lever, three function control

Three valve hydraulics

Optional

Four valve for use with ripper

Four valve for use with winch

Standard

Low Slip Traction Control (included with ARO and Cat Grade 3D)

Slope Indicate

Cat Product Link^™ PLE643/PLE743 Cellular

Third party 3D grade system compatible

Stable Blade – Basic Lift

Slope Indicate

Optional

Cat Grade with Slope Assist

Cat Command Station (availability varies by region

Cat Command Console (availability varies by region)

Full-color 254 mm (10 in) touchscreen grade display

Cat Product Link PLE683/PLE783 Cellular/Satellite

Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D

Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry

Standard

Rigid drawbar

Front pull device

Optional

Drawbar, towing

Machine security system

Mounting, winch

Ripper, parallelogram, includes three shanks and teeth

Winch, hydraulic, high performance

Winch, hydraulic, retrieval

Standard

Armrests, adjustable

Coat hook

Controls, seat mounted, fore/aft adjustment

Cup holders

Eco Mode

Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature

Electronic security system

Engine air cleaner service indicator

Engine RPM and gear display

Floor mat, rubber, heavy duty

Foot pads, dash

Hour meter, electronic

Independent forward/reverse speed settings

Mirror, rearview, inside

Power port, 12 volt

ROPS/FOPS canopy

Seat, air suspended, cloth or vinyl

Seatbelt, hi-vis retractable 76 mm (3")

Seatbelt buckling indicator/reminder

Single pedal combining decel and brake functions

Speed recall

Storage compartment

Throttle switch, rotary

Travel speed limiter, electronic

Optional

Power Pitch

Cab, with air conditioning

Cab, polycarbonate windows and air conditioning

Radio, AM/FM Bluetooth^®

Seat, air suspended, cloth or vinyl

Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls

Sound suppression

Optional

Heater, engine, coolant 120 V/240 V

Starting aid, ether