Dipper Payload120t
Dipper Capacity30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)120t
NoteDependent on application and material density
Working Weight - With Dipper and Standard Links3066000lb
Ballast - Furnished By Customer667150lb
Note (1)These weights will vary slightly depending upon dipper and optional equipment selection
Note (2)All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads38ft
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard36ft
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Ground Bearing Pressure - NoteGround bearing pressure is dependent upon many factors
Upper Works Overall Width - Including Standard Walkways41.9ft
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Planetary PropelDual-motor independent drive
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard36 m2 (382 kPa); 386 ft2 (55 psi)
TypeAutomatic, single-line system for open gear lubricant and grease
Components (1)Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Components (2)External FastFil from lower level
Power Requirements - NoteOther voltage options available to suit customer requirements
DriveIGBT Acutrol drive system
Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - Average Power Demand945-1322 kW
Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
Power Requirements - 60 Hz7,200V, 13,800V
System Voltage - Nominal50/60 Hz, 7,200V
Power Requirements - Peak power3778 kW
Rope Data - Boom Suspension - No.4
Rope Data - Boom Suspension - Diameter3.25in
TypeOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - NoteHigh impact ropes available as an option
Rope Data - Dipper Trip - No.1
Rope Data - Hoist - No.2
Rope Data - Hoist - Diameter2.75in
Rope Data - Dipper Trip - Diameter0.75in
Crowd (1)HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Crowd (2)(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Dipper Capacities30.6-62.7 m3 (40-82 yd3)
Maximum Dumping Height28.9ft
Dipper Payload120ton (US)
Operating Weight3066000lb
Cutting Radius - Maximum80ft
Revolving Frame Tail Swing Radius30.5ft
Cutting Height - Maximum53.5ft
Radius of Level Floor56.1ft
Dumping Height - With Clearance to Open Dipper Door28.9ft
Note (1)Optimal working ranges based on loading a Cat 795F AC truck.
Note (2)*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.