Net Power23.6hp
Engine ModelC1.7
Net Power @ 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/126923.6hp
Net Power - ISO 924924.7hp
Bore3.3in
Stroke3.9in
Displacement104in³
EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards.
NoteAdvertised power is tested per the specified standard in effect at the time of manufacture.
Note (1)Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2,200 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.
Operating Weight9239lb
Minimum Operating Weight with Canopy*7673lb
Maximum Operating Weight with Canopy**8930lb
Minimum Operating Weight with Cab*7982lb
Maximum Operating Weight with Cab**9239lb
EU: CE Plate Weight with Canopy***7784lb
EU: CE Plate Weight with Cab***8004lb
Note (1)*Minimum Weight is based on fixed rubber tracks, operator, full fuel tank, standard stick, blade, no bucket and extra counterweight.
Note (2)**Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, no bucket and extra counterweight.
Note (3)***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Dig Depth122.4in
Vertical Wall94.1in
Maximum Reach - Ground Level211.8in
Maximum Reach216.9in
Maximum Dig Height197.6in
Maximum Dump Clearance141.7in
Boom In Reach73.2in
Tail Swing without Counterweight35in
Tail Swing - with Extra Counterweight39.6in
Maximum Blade Depth21.1in
Maximum Blade Height15.2in
Boom Height - Shipping Position68.9in
O/A Shipping Height97.6in
Swing Bearing - Height22.2in
O/A Undercarriage Length87.4in
Overall Shipping Length*190.9in
Boom Swing - Right34.3°
Boom Swing - Left640mm
Track Belt/Shoe Width11.8in
Track Width70.1in
Minimum Ground Clearance Below Undercarriage12.2in
Stick Length61.4in
Note*Overall Shipping Length depends on blade position during shipment.
Dig Depth110.6in
Vertical Wall88.6in
Maximum Reach - Ground Level202in
Maximum Reach207.5in
Maximum Dig Height193.7in
Maximum Dump Clearance137.4in
Boom In Reach69.3in
Tail Swing without Counterweight35in
Tail Swing with Extra Counterweight39.6in
Maximum Blade Depth21.1in
Maximum Blade Height15.2in
Boom Height - Shipping Position59.8in
O/A Shipping Height97.6in
Swing Bearing - Height22.2in
O/A Undercarriage Length87.4in
Overall Shipping Length*189in
Boom Swing - Right34.3°
Boom Swing - Left25.2°
Track Belt/Shoe Width11.8in
Minimum Ground Clearance Below Undercarriage12.2in
Stick Length49.6in
Note*Overall Shipping Length depends on blade position during shipment.
Roll Over Protective Structure (ROPS)ISO 12117-2:2008
Tip Over Protective Structure (TOPS)ISO 12117:1997
Top GuardISO 10262:1998 (Level I)
Cooling System1.8gal (US)
Engine Oil1.6gal (US)
Fuel Tank11.9gal (US)
Hydraulic Tank5.3gal (US)
Hydraulic System11.9gal (US)
Recyclability95%
Width70.1in
Height13.8in
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1
Cab309lb
Counterweight221lb
Extra Counterweight551lb
Long Stick44lb
Steel Tracks287lb
Angle Blade353lb
Travel Speed - High2.8mile/h
Travel Speed - Low1.6mile/h
Maximum Traction Force - High Speed3799lbf
Maximum Traction Force - Low Speed6969lbf
Ground Pressure - Minimum Weight4.3psi
Ground Pressure - Maximum Weight5.2psi
Gradeability - Maximum30 degrees
Operator Sound Pressure (ISO 6396:2008)78dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)94dB(A)
NoteEuropean Union Directive ‚ "2000/14/EC"
TypeLoad Sensing Hydraulics with Variable Displacement Piston Pump
Pump Flow at 2,400 rpm26gpm
Operating Pressure - Equipment3553psi
Operating Pressure - Travel3553psi
Operating Pressure - Swing2625psi
Auxiliary Circuit - Primary - Flow18gpm
Auxiliary Circuit - Primary - Pressure3553psi
Auxiliary Circuit - Secondary - Flow7gpm
Auxiliary Circuit - Secondary - Pressure3553psi
Digging Force - Stick - Standard4249lbf
Digging Force - Stick - Long3799lbf
Digging Force - Bucket7419lbf
Note*Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Machine Swing Speed9r/min
Boom Swing - Left75°
Boom Swing - Right50°