Net Power45hp
Engine ModelC1.7 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC45hp
Gross Power - 2,400 rpm - SAE J1995:201448.4hp
Bore3.3in
Stroke3.9in
Displacement101in³
EmissionsThe Cat® C1.7 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
NoteAdvertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.
Operating Weight12688lb
Minimum Operating Weight with Canopy*11016lb
Maximum Operating Weight with Canopy**12469lb
Minimum Operating Weight with Cab*11234lb
Maximum Operating Weight with Cab**12688lb
Note (1)*Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight.
Note (2)**Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket.
Dig Depth144.5in
Vertical Wall100.8in
Maximum Reach - Ground Level229.7in
Maximum Reach235.8in
Maximum Dig Height210.8in
Maximum Dump Clearance151.4in
Boom In Reach101.6in
Tail Swing without Counterweight43.1in
Tail Swing with Counterweight47.2in
Maximum Blade Height15.2in
Maximum Blade Depth23.4in
Boom Height - Shipping Position74.6in
O/A Shipping Height100.4in
Swing Bearing - Height24.4in
O/A Undercarriage Length101.6in
Overall Shipping Length*210.2in
Boom Swing - Right34.1°
Boom Swing - Left615mm
Track Belt/Shoe Width15.7in
Track Width78in
Ground Clearance13.2in
Stick Length63in
Note*Overall Shipping Length depends on blade position during shipment.
Roll Over Protective Structure (ROPS)ISO 12117-2:2008
Top GuardISO 10262:1998 Level I
Recyclability96%
Dig Depth134.6in
Vertical Wall91.9in
Maximum Reach - Ground Level220.1in
Maximum Reach226.6in
Maximum Dig Height205.3in
Maximum Dump Clearance145.7in
Boom In Reach101.2in
Tail Swing without Counterweight43.1in
Tail Swing with Counterweight47.2in
Maximum Blade Height15.2in
Maximum Blade Depth23.4in
Boom Height - Shipping Position71.7in
O/A Shipping Height100.4in
Swing Bearing - Height24.4in
O/A Undercarriage Length101.6in
Overall Shipping Length*208.9in
Boom Swing - Right34.1°
Boom Swing - Left24.2°
Track Belt/Shoe Width15.7in
Track Width78in
Ground Clearance13.2in
Stick Length53.2in
Note*Overall Shipping Length depends on blade position during shipment.
Machine Swing Speed9r/min
Boom Swing - Left72 Degrees
Boom Swing - Right50 Degrees
Counterweight534lb
Long Stick75lb
Steel Tracks with Pads827lb
Angle Blade225lb
Pump Flow at 2,400 rpm35gpm
Operating Pressure - Equipment3843psi
Operating Pressure - Travel3843psi
Operating Pressure - Swing2901psi
Auxiliary Circuit - Primary - Flow21gpm
Auxiliary Circuit - Primary - Pressure3843psi
Auxiliary Circuit - Secondary - Flow7gpm
Auxiliary Circuit - Secondary - Pressure3843psi
Digging Force - Stick - Standard6362lbf
Digging Force - Stick - Long5665lbf
Digging Force - Bucket11061lbf
NoteFlow and pressure are not combinable. Under load, as flow rises pressure goes down.
TypeLoad Sensing Hydraulics with Variable Displacement Piston Pump
Straight Blade Width78in
Straight Blade Height15.4in
Angle Blade Width78in
Angle Blade Height15.7in
Angle Blade - Left25 degrees
Angle Blade - Right25 degrees
Travel Speed - High3.1mile/h
Travel Speed - Low1.7mile/h
Maximum Traction Force - High Speed5553lbf
Maximum Traction Force - Low Speed11353lbf
Ground Pressure - Minimum Weight4psi
Ground Pressure - Maximum Weight4.7psi
Gradeability - Maximum30 degrees
Operator Sound Pressure (ISO 6396:2008)76dB(A)
Average Exterior Sound Pressure (ISO 6395:2008)97dB(A)
Note*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure a
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1
Cooling System2.9gal (US)
Engine Oil1.6gal (US)
Fuel Tank17gal (US)
Hydraulic Tank16gal (US)
Hydraulic System20gal (US)