Engine Power (ISO 14396)196HP
Bore4.1in
Derating Altitude9842ft
Displacement427.8in³
EmissionsU.S. EPA Tier 4 Final/EU Stage V
Engine ModelCat 7.1
Engine RPM2,200
Standard Capability109°F
High - Ambient Capability122°F
Maximum Torque - ISO 9249616lb/ft
Stroke5.3in
Torque Rise - ISO 929440%
Number of Cylinders6
Note (1)Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Note (2)Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3)Power as declared per ISO 14396
Engine Power AWD (ISO 14396)196HP
Weight (Stage V)*38912lb
Weight (Tier 4 Final)**40488lb
All-wheel Drive Weight (AWD) (Tier 4 Final)**42119lb
All-Wheel Drive Weight (AWD) (Stage V)*40543lb
Operating Weight - Typically Equipped38912lb
Note* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
Blade Width12ft
Arc Radius16.3in
Blade Height24in
Cutting Edge Width6in
End Bit6in
Throat Clearance4.4in
NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Width All Wheel Drive (AWD)99.3in
Length of Machine*406.7in
Maximum Height132.4in
Width95.6in
Note*Typically equipped with push block and ripper.
Circle Center Shift Left29.6in
Circle Center Shift Right28.7in
Maximum Depth of Cut28.1in
Maximum Lift Above Ground18.7in
Maximum Shoulder Reach Left74.3in
Maximum Shoulder Reach Right71.3in
Moldboard Side Shift Left25.6in
Moldboard Side Shift Right20.7in
Blade Tip Range Backward5
Blade Tip Range Forward40
Fuel Tank78gal (US)
Circle Drive with Slip Clutch2gal (US)
Circle Drive without Slip Clutch0.5gal (US)
Cooling System40l
Engine Crankcase5.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)4.2gal (US)
Hydraulic System11.9gal (US)
Transmission4.8gal (US)
