Nominal Rated Payload360ton (US)
Rated Gross Machine Weight1270000lb
Chassis Weight448415lb
Body Weight Range38 833 – 42 907 kg (85,611 – 94,594 lb)
Note (1)Consult your tire manufacturer for maximum tire load.
Note (2)Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
Note (3)Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations
Gross Power - SAE J19953500hp
Engine ModelCat® C175-16
Net Power - SAE J13493405hp
Rated Speed1800r/min
Emissions RatingFuel Optimized
Bore6.9in
Stroke8.7in
Displacement5187in³
Note (1)Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
Note (2)U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
Note (3)Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Steer Angle39°
Turning Diameter - Front106.3ft
Steering StandardsSteering Standards: ISO 5010:2007
NoteTurning Diameter (ISO 7457:1997)
Fuel Tank1300gal (US)
Fuel Tank (Tier 4)1200gal (US)
Diesel Exhaust Fluid Tank100gal (US)
Cooling System211gal (US)
Crankcase82gal (US)
Front Wheels - Each7gal (US)
Final Drive - Each67gal (US)
Hydraulic Tank296gal (US)
Hydraulic System - Including Tank385gal (US)
Grease Tank90lb
Note (1)DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Total Reduction Ratio35:01:00
Top Speed - Loaded40mile/h
Generator/AlternatorCat brushless, engine mounted, dual bearing
ControlsCat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
Wheel MotorCat AC induction, rear axle mounted
Cooling SystemCat variable speed, hydraulically driven cooling system
Service BrakesFour-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
Front Wet Disc Brake Surface Area20378in²
Rear - Wet Disc Brake Surface Area30750in²
StandardsService and Secondary: ISO 3450:2011
Parking BrakeFour-corner, Multi-disc, Spring Applied, Hydraulically Released
Load BrakeRear service brakes
Dynamic Retarding Power - Continuous5480hp
NoteAnti-Lock Brake System (ABS) optional with CMD package
Sound StandardsThe operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
Front Axle - Empty47%
Rear Axle - Empty53%
Front Axle - Loaded33%
Rear Axle - Loaded67%
NoteWeight distributions optimized with Cat body.
Standard Tires59/80 R63
Rims44" x 63"
Note (1)Quick Change Rims optional.
Note (2)Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Struck97-153 m³ (127-200 yd³)
Heaped (SAE 2:1)186-237 m³ (243-310 yd³)
NoteConsult your local Cat dealer for body recommendations.
TypeTwin, two-stage hydraulic cylinders with snubbing valve.
Pump Flow - High Idle257.3gal/min
Relief Valve Setting - Raise3029psi
Body Raise Time - High Idle21s
Body Lower Time - Float22s
Body Power Down- High Idle17.5s
Note (1)Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
Note (2)Power raise in both stages; power down capability in both stages.
Note (3)Automatic body-lower modulation reduces impact on frame.
TypeSelf-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
Effective Cylinder Stroke - Front4in
Effective Cylinder Stroke - Rear2in
Rear axle - Oscillation+/- 5.32 degrees
Air ConditioningHFC - 134A refrigerant: 21,600 Btu/h
Heater / Defroster24600Btu/h
NoteAmbient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
ROPS Standards (1)ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
FOPS StandardsFOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Height - Top of ROPS22.05ft
Overall Length51.44ft
Wheel Base21.9ft
Rear Axle - Tail16.07ft
Dump Clearance - Empty5.72ft
Loading Height - Empty23.85ft
Overall Height - Body Raised48.85ft
Centerline Front Tire Width23.06ft
Front Axle Clearance - Loaded2.81ft
Overall Canopy Width (with rock deflectors)33.15ft
Outside Body/Canopy Width (without rock deflectors)31.62ft
Inside Body Width29.44ft
Front Canopy Height - Empty26.01ft
Rear Axle Clearance - Loaded2.8ft
Centerline of Rear Dual Tire Width19.5ft
Overall Tire Width - Empty30.27ft
NoteDimensions listed includes canopy deflectors