239D3 Compact Track Loader

Gross Power - SAE J199567.1hp

Displacement134.3in³

Bore3.3in

Stroke3.9in

Peak Torque - 1,500 rpm - SAE J1995153ft·lbf

Net Power - SAE 134965.8hp

Engine ModelCat C2.2 CRDI

Net Power - ISO 924966.5hp

Net Power65.8hp

Rated Operating Capacities - 35% Tipping Load1530lb

Tipping Load4370lb

Breakout Force - Tilt Cylinder3913lb

Rated Operating Capacity with Optional Counterweight2400lb

Ground Contact Area - With 320 mm/12.6 in Track1373in²

Ground Pressure - With 320 mm/12.6 in Track5.4psi

NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual qui

Ground Contact Area - With 400 mm/15.7 in Track1716in²

Ground Pressure - With 400 mm/15.7 in Track4.4psi

Rated Operating Capacities - 50% Tipping Load2185lb

Operating Weight7434lb

Vehicle Width (320 mm/12.6 in tracks)66in

Length - With Bucket on Ground127.3in

Length - Without Bucket99.3in

Maximum Reach - With Arms Parallel to Ground53.4in

Turning Radius from Center - Bucket81.5in

Overall Length - Track71.2in

Reach - Maximum Lift/Dump22.2in

Vehicle Width (400 mm/15.7 in tracks)69.1in

Maximum Overall Height143.5in

Bucket Pin Height - Carry Position8.6in

Length - Track on Ground54.5in

Clearance at Maximum Lift and Dump81in

Bucket Pin Height - Maximum Lift111.2in

Departure Angle34.5°

Rack Back Angle - Maximum Height85.5°

Turning Radius from Center - Coupler45.6in

Height - Top of Cab80.1in

Maximum Dump Angle50.3°

Turning Radius from Center - Machine Rear57.4in

Ground Clearance7.7in

ROPSISO 3471:2008

FOPSISO 3449:2005 Level I

Cooling System3.2gal (US)

Engine Crankcase2.6gal (US)

Fuel Tank15.1gal (US)

Hydraulic System11.9gal (US)

Hydraulic Tank9gal (US)

Hydraulic Flow - High Flow - Loader Hydraulic Flow26gal/min

Hydraulic Flow - Standard - Loader Hydraulic Pressure3336psi

Hydraulic Flow - Standard - Loader Hydraulic Flow18gal/min

Hydraulic Flow - High Flow - Loader Hydraulic Pressure3336psi

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)50.9hp

Hydraulic Flow - Standard - Hydraulic Power (Calculated)35.5hp

Travel Speed - Forward or Reverse - Two Speed7.6mile/h

Travel Speed - Forward or Reverse - One Speed5mile/h

Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe

Outside Cab***103dB(A)

Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Inside Cab**83dB(A)

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Standard

12 volt Electrical System

80 ampere Alternator

Ignition Key Start/Stop Switch

Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light

Backup Alarm

Heavy Duty Battery, 850 CCA

Standard

Gauges: Fuel Level, Hour Meter

Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged

Adjustable Vinyl Seat

Fold In Ergonomic Contoured Armrest

Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

ROPS Cab, Open, Tilt Up

FOPS, Level I

Top and Rear Windows

Floor Mat

Interior Rearview Mirror

12 volt Electric Socket

Horn

Hand (Dial) Throttle, Electronic

Adjustable Joystick Controls

Anti-theft Security System with 6-button Keypad

Storage Compartment with Netting

Standard

Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards

Air Cleaner, Dual Element, Radial Seal

S·O·SSM Sampling Valve, Hydraulic Oil

Filters, Cartridge-type, Hydraulic

Filters, Canister-type, Fuel and Water Separator

ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)

Spring Applied, Hydraulically Released Parking Brakes

Hydrostatic Transmission, Two Speed Travel

Suspension – Independent Torsion Axles (4)

Standard

Engine Enclosure, Lockable

Extended Life Antifreeze, –36° C (–33° F)

Machine Tie Down Points (6)

Support, Lift Arm

Hydraulic Oil Level Sight Gauge

Radiator Coolant Level Sight Gauge

Radiator, Expansion Bottle

Cat ToughGuard^™ Hose

Auxiliary, Hydraulics, Continuous Flow

Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release

Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm

Electrical Outlet, Beacon

Belly Pan Cleanout

Variable Speed Demand Fan

Product Link^™ PL240, Cellular

Standard

Hydraulics, Standard or High Flow

Quick Coupler, Mechanical or Powered

High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)

EU Preparation Package (Europe only)

Steel Imbed Rubber Track – 320 mm (12.6 in) Block Tread or 400 mm (15.7 in) Bar Tread

Dual Flange Front Idler/Single Flange Rear Idler

PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)

COMFORT PACKAGES:
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner

Optional

Hand-Foot Style Controls

External Counterweights

Beacon, Rotating

Engine Block Heater – 120V

Oil, Hydraulic, Cold Operation

Paint, Custom

Product Link PL641, Cellular

Ride Control

Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response and Creep Control

Work Tool Return to Dig and Work Tool Positioner

Bluetooth^® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)