Gross Power - SAE J199574.3hp
Net Power - SAE 134972.9hp
Displacement203in³
Bore3.7in
Stroke4.7in
Net Power72.9hp
NoteNet power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler/aftertreatment and cooling fan.
Engine ModelCat C3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995195ft·lbf
Net Power - ISO 924973.7hp
Rated Operating Capacities - 35% Tipping Load2890lb
Tipping Load8255lb
Breakout Force - Tilt Cylinder7291lb
Rated Operating Capacity with Optional Counterweight4370lb
Rated Operating Capacities - 50% Tipping Load4130lb
Ground Pressure - With 450 mm/17.7 in Track4.7psi
Ground Contact Area - With 450 mm/17.7 in Track2272in²
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Operating Weight10688lb
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
Cooling System3.7gal (US)
Engine Crankcase3gal (US)
Fuel Tank27.7gal (US)
Hydraulic System13.7gal (US)
Hydraulic Tank10.3gal (US)
Length - Track on Ground64.2in
Overall Length - Track83.8in
Height - Top of Cab83.2in
Ground Clearance8.9in
Departure Angle33°
Maximum Dump Angle51°
Clearance at Maximum Lift and Dump94in
Turning Radius from Center - Machine Rear70.7in
Length - Without Bucket117.9in
Maximum Reach - With Arms Parallel to Ground50in
Turning Radius from Center - Bucket88.8in
Bucket Pin Height - Carry Position7.5in
Turning Radius from Center - Coupler55.5in
Bucket Pin Height - Maximum Lift125.1in
Reach - Maximum Lift/Dump30in
Length - With Bucket on Ground146.2in
Maximum Overall Height158.1in
Rack Back Angle - Maximum Height84°
Bucket Pin Reach - Maximum Lift14.5in
Vehicle Width (450 mm/17.7 in tracks)78in
NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydr
ROPSISO 3471:2008
FOPSISO 3449:2005 Level I
Hydraulic Flow - Standard - Hydraulic Power (Calculated)44hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure4061psi
Hydraulic Flow - Standard - Loader Hydraulic Flow23psi
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)76hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure3335psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow32gal/min
Travel Speed - Forward or Reverse - Two Speed8.3mile/h
Travel Speed - Forward or Reverse - One Speed4.5mile/h
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Note (2)**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
Outside Cab***103dB(A)
Inside Cab**83dB(A)
Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.