299D3 XE Land Management Compact Track Loader

Gross Power - SAE J1995110hp

Net Power - SAE 1349106hp

Displacement232in³

Bore3.9in

Stroke4.7in

Net Power106hp

Net Power - ISO 9249107hp

Engine ModelCat C3.8 DIT (turbo)

Peak Torque - 1,500 rpm - SAE J1995276ft·lbf

Rated Operating Capacities - 35% Tipping Load4340lb

Tipping Load12400lb

Breakout Force - Tilt Cylinder7270lb

Breakout Force - Lift Cylinder6162lb

Ground Contact Area - With 450 mm/17.7 in Track2443in²

NoteOperating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with polycarbonate door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,

Ground Contact Area - With 400 mm/15.7 in Track2171in²

Ground Pressure - With 400 mm/15.7 in Track5.9psi

Ground Pressure - With 450 mm/17.7 in Track5.2psi

Rated Operating Capacities - 50% Tipping Load6200lb

Operating Weight12764lb

Cooling System4.1gal (US)

Engine Crankcase3.5gal (US)

Fuel Tank58gal (US)

Hydraulic System14.5gal (US)

Hydraulic Tank10.3gal (US)

Diesel Exhaust Fluid (DEF) Tank5gal (US)

Length - Track on Ground69.6in

Overall Length - Track89.4in

Height - Top of Cab83.6in

Ground Clearance9.6in

Departure Angle33°

Maximum Dump Angle54°

Vehicle Width (450 mm/17.7 in tracks)78in

Turning Radius from Center - Coupler58.1in

Turning Radius from Center - Machine Rear74in

Vehicle Width (400 mm/15.7 in tracks)76in

Turning Radius from Center - Bucket (racked)91.1in

Length - Without Bucket125.5in

Bucket Pin Reach - Maximum Lift19.4in

Clearance at Maximum Lift and Dump94.5in

Rack Back Angle - Maximum Height81°

Maximum Overall Height158.7in

Reach - Maximum Lift/Dump33.6in

Length - With Bucket on Ground154.7in

Maximum Reach - With Arms Parallel to Ground51.9in

Bucket Pin Height - Maximum Lift126.3in

Bucket Pin Height - Carry Position7.1in

Roll Back Angle25°

ROPSISO 3471:2008

FOPSISO 3449:2005 Level I

Note (2)*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Note (1)Sealed and pressurized cab is standard in North America and Europe.

Note (3)**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Inside Cab*83dB(A)

Outside Cab**104dB(A)

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Standard Flow Mode - Loader Hydraulic Flow23gal/min

Standard Flow Mode - Loader Hydraulic Pressure3335psi

Standard Flow Mode - Hydraulic Power - Calculated44hp

Hydraulic Flow - XE - Hydraulic Power (calculated)94hp

Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*40gal/min

Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure4061psi

Note*When equipped with Cat 400 Series work tools.

Travel Speed - Forward or Reverse - Two Speed8.3mile/h

Travel Speed - Forward or Reverse - One Speed5.5mile/h

Standard

12 volt Electrical System

100 ampere Alternator

Ignition Key Start/Stop Switch

Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear LED Working Lights, Two Adjustable Front LED Lights, Dome Light

Backup Alarm

Heavy Duty Battery, 1,000 CCA, with Battery Disconnect

Standard

Gauges: Fuel Level, DEF Level, Hour Meter

Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Air Inlet Heater Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System

High Back Cloth Seat with Air Suspension, Heated with Recline and Lumbar Support and Fully Adjustable Seat Mounted Controls

Fold In Ergonomic Contoured Armrest

Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

ROPS Cab, Enclosed, Tilt Up

FOPS, Level I

Top, Rear and Side Windows

Headliner, Deluxe

Floor Mat

Interior Rearview Mirror

USB Charging Port

Horn

Hand (Dial) and Foot Throttle, Electronic with Decel Feature

Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control

Storage Compartment with Netting

Standard

Cat C3.8, Turbo Diesel Engine, Meeting U.S. EPA Tier 4 Final and EU Stage V Emission Standards

Air Cleaner, Dual Element, Radial Seal

S·O·SSM Sampling Valve, Hydraulic Oil

Filters, Cartridge-type, Hydraulic

Filters, Canister-type, Fuel and Water Separator

Radiator/Hydraulic Oil Cooler (side-by-side)

Spring Applied, Hydraulically Released, Wet Multi Disc Parking Brakes

Hydrostatic Transmission, Two Speed Travel

Suspension – Independent Torsion Axles (4)

Speed Sensitive Ride Control

Standard

Engine Enclosure, Lockable

Extended Life Antifreeze, –37° C (–34° F)

Machine Tie Down Points (6)

Support, Lift Arm

Hydraulic Oil Level Sight Gauge

Radiator Coolant Level Sight Gauge

Radiator, Expansion Bottle

Cat ToughGuard^™ Hose

Auxiliary, Hydraulics, Continuous Flow

Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm

Electrical Outlet, Beacon

Belly and Engine Compartment Access Panels for Cleanout

Variable Speed Demand Fan with Reversing Functionality

Steel Embed Rubber Track – 400 mm (15.7 in) Block Tread

Triple Flange Idlers (front and rear)

Product Link^™ PL240, Cellular

Fire Extinguisher Mounting Bracket (in-cab)

Screw-to-Connect Auxiliary Hydraulic Couplings (¾ in)

Push-to-Connect Flat Faced Auxiliary Hydraulic Couplings (½ in)

Debris Guarding (external and turbo)

Precleaner for Engine Air Intake

Additional Machine Guarding

Drive-line Guarding

Turbo Guard

Additional Machine Sealing

Fire Suppression System – Ready

Standard

Quick Coupler, Mechanical or Powered

High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)

PERFORMANCE PACKAGE:
– Performance Package H3: XE Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)

COMFORT PACKAGE:
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, Air Ride Seat (High Back and Heated) and Polycarbonate Door

Optional

Beacon, Rotating

Engine Block Heater – 120V

Oil, Hydraulic, Cold Operation

Paint, Custom

Product Link PL641, Cellular

Bluetooth^® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)

Roof Mounted Auxiliary Hydraulic Cooler

Steel Embed Rubber Track – 450 mm (17.7 in) Block Tread

Steel Embed Rubber Track – 450 mm (17.7 in) BAR Tread

Steel Track – 355 mm (14 in) Sealed and Lubricated Steel Track (SALT) with Triple Grouser Shoes

Fire Suppression System - Fully Installed