CB4.0 Utility Compactor

CB4.0 Utility Compactor

The CB4.0 is a 3-5 metric ton compactor with 800 mm (31.5 in) drums. It’s a versatile machine that can be used as the only vibratory roller on small sized jobs or on larger jobs as a support roller for high-production rollers. Its high amplitude and drum width give it the capacity to achieve a tons-per-day production rate that make it an excellent match for shoulders, small parking lots, lane additions, or other similar sized jobs.

Request a Quote

Standard Operating Weight with ROPS7971lb

Maximum Operating Weight with ROPS9493lb

Static Linear Load59.8lb/in

Operating Weight - At Front Drum with ROPS/FOPS3837lb

Operating Weight - At Rear Drum with ROPS/FOPS4134lb

Compaction Width51.2in

Overall Length112.3kg/cm

Overall Width55.1in

Drum Width51.2in

Drum Diameter31.5in

Wheel Base80.7in

Height - ROPS104.7in

Gross Power48.2hp

Engine ModelC1.7T

Net Power - ISO 924947.6hp

Drum Offset2in

Curb Clearance19.6in

Ground Clearance11.2in

Travel Speed - Maximum8.1mile/h

Turning Radius - Inside Drum Edge115.2in

Turning Radius - Outside Drum Edge166.4in

Frequency55/45 Hz (3300/2700 vpm)

Nominal Amplitude - High0.02in

Centrifugal Force - Maximum7524lb/ft

Fuel Tank Capacity21.43gal (US)

Water Spray Tank Capacity79gal (US)

Standard

Adjustable Suspension Seat with Operator Presense Switch

ROPS Folding

Seat Belt - 75 mm (3 in) high visibility orange

Operator Console w/ Water Tank Gauge, Emergency Stop, and Glove Box

12-volt Power Outlet

Horn, Backup Alarm

Optional

ROPS Fixed

Sun Canopy

Seat - Side Shift

Dual Propel Levers

Standard

Folding Scrapers

Vibe Selection - front, rear, or both

Pressurized, Triple-Filtration Spray System with Test Mode

Optional

Fixed Scrapers

Cocoa Mats

Edge Cutter Ready

Water Sprayer Antifreeze Kit

Ballast Kit - 400 kg (880 lb)

Ballast Kit - 542 kg (1194.91 lb)

Standard

Auto Engine Off and Auto Warmup

Air Cleaner, Dual Element

Engine Belt Guard

Optional

Traction Control

Standard

Telematics

Optional

Remote Flash / Troubleshoot

CMV - Compaction Measurement Value

Standard

LED Working Lights

Optional

Battery Disconnect

LED Roading Lights

Rotating Amber Beacon

Standard

Vandal Protection - lockable hood, fuel fill, and controls cover

Machine Life and Tiedowns

Offsets Hitch

Optional

Biodegradeable Hydraulic Oil

Bumpers

Single Point Lift

Custom Paint

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.