Engine ModelCat® C13
Gross Power (SAE J1995)375hp
Net Power (SAE J1349)367hp
Engine Power (ISO 14396)370hp
Bore5.1in
Stroke6.2in
Displacement762.8in³
Note (1)Advertised power is tested at 1,800 rpm.
Note (2)Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (5)Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (6)Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-rating Below12500ft
Peak Engine Torque Gross (SAE J1995)1579lbf·ft
Peak Engine Torque Net (SAE J1349)1554lbf·ft
Peak Engine Torque Speed1200r/min
Rated Payload31ton (US)
Heaped (SAE 2:1)23yd³
Struck17.4yd³
Tailgate Heaped SAE 2:124.6yd³
Tailgate Struck18.2yd³
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con
Forward - 15mile/h
Forward - 29mile/h
Forward - 314mile/h
Forward - 421mile/h
Forward - 529mile/h
Forward - 634mile/h
Reverse - 16mile/h
Interior Cab72dB(A)
Note (1)The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fan’s speed. The sound level may vary at different cooling fan
Note (2)Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments.
Front Axle - Empty33069lb
Center Axle - Empty10053lb
Rear Axle - Empty9568lb
Total - Empty52690lb
Front Axle - Rated Load7231lb
Center Axle - Rated Load27249lb
Rear Axle - Rated Load27249lb
Total - Rated Load61729lb
Front Axle - Loaded40300lb
Center Axle - Loaded37302lb
Rear Axle - Loaded36817lb
Total - Loaded114420lb
TypeHigh strength Brinell HB450 wear resistant steel
Front Plate0.28in
Base Plate0.51in
Side Plates0.43in
Fuel Tank108.8gal (US)
DEF Tank5.3gal (US)
Cooling System21.9gal (US)
Hydraulic System29.1gal (US)
Engine Crankcase10gal (US)
Transmission12.4gal (US)
Final Drives/Differential33gal (US)
Output Transfer Gear Box6.3gal (US)
Raise Time12s
Lower Time8s
BrakesISO 3450:2011
Cab - FOPSISO 3449:2005 Level II
Cab - ROPSISO 3471:2008
SteeringISO 5010:2019
Turning Dimensions - Steer Angle - Left/Right45°
Turning Dimensions - SAE Turning Radius294in
Turning Dimensions - Clearance Radius318in
Turning Dimensions - Inside Radius153in
Turning Dimensions - Aisle Width210in
NoteDimensions are for machines equipped with 23.5R25 tires.
Lock to Lock4.75 seconds @ 60 rpm
Hydraulic Excavators: 349/352 - Passes4-5
Hydraulic Excavators: 336 - Passes5-6
Wheel Loaders: 972/972 XE - Passes3-4
Wheel Loaders: 966/966 XE - Passes4
Wheel Loader: 962 - Passes4-5
Wheel Loader: 950 - Passes5
NoteAn optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr