730 EJ Articulated Truck

Engine ModelCat® C13

Gross Power (SAE J1995)375hp

Net Power (SAE J1349)367hp

Engine Power (ISO 14396)370hp

Bore5.1in

Stroke6.2in

Displacement762.8in³

Note (1)Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (2)Advertised power is tested at 1,800 rpm.

Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, aftertreatment and fan at minimum speed.

Note (4)Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.

Note (5)Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.

Note (6)Diesel Exhaust Fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue® or API certifications.

No Engine De-rating Required Below12500ft

Peak Engine Torque Gross (SAE J1995)1579lbf·ft

Peak Engine Torque Net (SAE J1349)1564lbf·ft

Peak Engine Torque Speed1200r/min

Rated Payload30ton (US)

Heaped (SAE 2:1)22.1yd³

Struck17.7yd³

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con

Forward - 15mile/h

Forward - 29mile/h

Forward - 314mile/h

Forward - 421mile/h

Forward - 529mile/h

Forward - 634mile/h

Reverse - 16mile/h

Interior Cab72dB(A)

Note (1)The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan

Note (2)Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or doors/ windows open for extended periods or in noisy environments.

Front Axle - Empty34723lb

Center Axle - Empty12214lb

Rear Axle - Empty11707lb

Total - Empty58643lb

Front Axle - Rated Load1433lb

Center Axle - Rated Load29156lb

Rear Axle - Rated Load29156lb

Total - Rated Load59745lb

Front Axle - Loaded35009lb

Center Axle - Loaded41502lb

Rear Axle - Loaded41017lb

Total - Loaded117528lb

TypeHigh strength Brinell HB450 wear resistant steel

Eject Time12s

Retract Time15s

Fuel Tank108.8gal (US)

DEF Tank5.3gal (US)

Cooling System21.9gal (US)

Hydraulic System29.1gal (US)

Engine Crankcase10gal (US)

Transmission12.4gal (US)

Final Drives/Differential33gal (US)

Output Transfer Gear Box6.3gal (US)

BrakesISO 3450 – 2011

Cab - FOPSISO 3449 Level II – 2005

Cab - ROPSISO 3471 – 2008

SteeringISO 5010 – 2019

Turning Dimensions - Steer Angle - Left/Right45°

Turning Dimensions - SAE Turning Radius294in

Turning Dimensions - Clearance Radius318in

Turning Dimensions - Inside Radius152in

Turning Dimensions - Aisle Width214in

NoteDimensions are for machines equipped with 750/65 R25 tires.

Lock to Lock4.75 seconds @ 60 rpm

Hydraulic Excavators: 349/352 - Passes4-5

Hydraulic Excavators: 336 - Passes5-6

Wheel Loaders: 972/972 XE - Passes3-4

Wheel Loaders: 966/966 XE - Passes4

Wheel Loader: 962 - Passes4-5

Wheel Loader: 950 - Passes5

NoteAn optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Adjustable air vents

Combined gear selection and eject control lever

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Air conditioning

Heater and defroster with four-speed fan

Mirrors: exterior

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Eject control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Machine Security System (MSS) ready
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Secondary steering – electro hydraulic

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Sun visor

Tilt and telescopic steering wheel

Touchscreen display incorporating the rearview camera video feed

Retractable belt: Operator seat and second seat

Windows opening both sides, tinted

Windshield wiper and washer, two speed, intermittent (front)

Optional

Mirrors, heated motorized

Operator seat belt, four-point

Radio, Bluetooth^® stereo system

Seat, heated/cooled

Standard

Product Link^™ Cellular PLE643

Cat Detect with Stability Assist

Optional

Cat Payload monitoring system

Product Link Dual PLE683

Standard

Batteries (two) maintenance free

Electrical system: 24-volt, 10A 24- to 12-volt converter

Horn

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Remote starting receptacle (cables not included)

Optional

Engine block heater

Cold weather start attachment

Ether start

Flashing LED beacon

Roof mounted LED work lights

Standard

Auto shift six-speed forward and one reverse transmission

Cat C13 engine

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Dual circuit oil immersed, enclosed brakes – all wheels

Retarder: engine compression brake

Three axle, six-wheel drive

Standard

Reverse alarm

Rearview camera

Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

Standard

Rear window

Radiator

Crankcase

Front dump body spill guard

Standard

Mud flaps: wheel arch and body mounted with transportation tiebacks

S·O·S sampling valves

Tires, six 750/65 R25 radial

Vandalism protection: lockable caps

Sound suppression (standard in some countries*)
* Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.

Hydraulic tailgate

Optional

Auto lube installation for automatic greasing of bearings

Cold weather coolant –51° C (–60° F)

Exhaust heated body

Machine Security System (MSS)

Fast fuel fill

Fuel additive – anti-waxing

Wheel chocks