Engine ModelCat® C13B
Gross Power (SAE J1995)436hp
Net Power (SAE J1349)427hp
Engine Power (ISO 14396)431hp
Bore5.1in
Stroke6.2in
Displacement763in³
Note (1)Advertised power is tested at 1,800 rpm.
Note (2)Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (3)Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.
Note (4)Net power when the fan is at maximum speed is 319 kW (427 hp) per the SAE reference conditions.
Note (5)Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (6)Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
No Engine De-rating Below12500ft
Peak Engine Torque Gross (SAE J1995)1627lbf·ft
Peak Engine Torque Net (SAE J1349)1612lbf·ft
Peak Engine Torque Speed1200r/min
Rated Payload35.3ton (US)
Heaped (SAE 2:1)26.2yd³
Struck20.9yd³
Tailgate Heaped SAE 2:128.4yd³
Tailgate Struck22.2yd³
Forward - 15mile/h
Forward - 29mile/h
Forward - 314mile/h
Forward - 422mile/h
Forward - 530mile/h
Forward - 635mile/h
Reverse - 16mile/h
Interior Cab72dB(A)
Note (1)The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan
Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Front Axle - Empty32584lb
Center Axle - Empty11199lb
Rear Axle - Empty10692lb
Total - Empty54476lb
Front Axle - Rated Load8938lb
Center Axle - Rated Load30805lb
Rear Axle - Rated Load30805lb
Total - Rated Load70548lb
Front Axle - Loaded41522lb
Center Axle - Loaded42005lb
Rear Axle - Loaded41498lb
Total - Loaded125024lb
TypeHigh strength Brinell HB450 wear resistant steel
Front Plate0.28in
Base Plate0.51in
Side Plates0.43in
Fuel Tank105.7gal (US)
DEF Tank9gal (US)
Cooling System21.9gal (US)
Hydraulic System32.5gal (US)
Engine Crankcase11.4gal (US)
Transmission12.4gal (US)
Final Drives/Differential33gal (US)
Output Transfer Gear Box6.6gal (US)
Raise Time12s
Lower Time11s
BrakesISO 3450 – 2011
Cab - FOPSISO 3449 Level II – 2005
Cab - ROPSISO 3471 – 2008
SteeringISO 5010 – 2019
Turning Dimensions - Steer Angle - Left/Right45°
Turning Dimensions - SAE Turning Radius294in
Turning Dimensions - Clearance Radius318in
Turning Dimensions - Inside Radius153in
Turning Dimensions - Aisle Width210in
NoteDimensions are for machines equipped with 750/65 R25 tires.
Lock to Lock4.75 seconds @ 60 rpm
Hydraulic Excavators: 350/352 - Passes4-5
Hydraulic Excavators: 336 - Passes5-6
Wheel Loaders: 972/972 XE - Passes3-4
Wheel Loaders: 966/966 XE - Passes4
Wheel Loader: 962 - Passes4-5
Wheel Loader: 950 - Passes5
NoteAn optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr