Engine Power - ISO 14396174HP
Engine Power - ISO 14396 (DIN)176hp (metric)
Engine ModelC4.4
Net Power - ISO 9249171HP
Net Power - ISO 9249 (DIN)174hp (metric)
Bore4in
Displacement285.5in³
Stroke5in
Biodiesel CapabilityUp to B20¹
EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar
Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Operating Weight Maximum43980lb
Operating Weight Minimum38580lb
Note (1)Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration.
Note (2)Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight.
Maximum Travel Speed21.7mile/h
Main System - Maximum Flow - Implement67gal/min
Maximum Pressure - Equipment5366psi
Maximum Pressure - Swing5149gal/min
Maximum Pressure - Travel5076gal/min
Cooling System8.5gal (US)
Diesel Exhaust Fluid (DEF)5.3gal (US)
Hydraulic System - Including Tank68.7gal (US)
Hydraulic Tank31.7gal (US)
Final Drive0.7gal (US)
Fuel Tank92.5gal (US)
Boom5205 mm (17'1")
Bucket0.91 m³ GD (1.19 yd³)
Stick2.5 m (8' 2")
Shipping Height - Top of Cab11ft
Shipping Length27.8ft
Counterweight Clearance4.3ft
Ground Clearance1.1ft
Support Point11.5ft
Tail Swing Radius7.7ft
Wheel Base8.9ft
Boom TypeVA Boom
Bucket0.91 m³ GD (1.19 yd³)
Digging Height19.3ft
Stick2.5 m (8' 2")
Reach at Ground Level30.2ft
Vertical Wall Digging Depth15.1ft
Note (1)Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o
Bucket Forces (ISO)26752lbf
Stick Forces (ISO)16861lbf
Cutting Height33.7ft
Maximum Swing Speed32560ft·lbf
Swing Speed9.4r/min
Engine Oil2.9gal (US)
NoteThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
Recyclability92%
