907M Compact Wheel Loader

907M Compact Wheel Loader

The Cat® 907M Compact Wheel Loader delivers high performance with outstanding versatility. On-the-go operator tuned hydraulics and drive train adjust the machine’s response to the task at hand. Low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long.

Request a Quote

Maximum Gross Power73.2HP

Engine ModelCat® C3.3B DIT*

Maximum Gross Power - ISO 1439673.2HP

Maximum Gross Power - ISO 14396 (metric)74.2HP

Rated Net Power - 2,400 rpm - SAE J134971.9HP

Rated Net Power - 2,400 rpm - ISO 924972.9HP

Maximum Gross Torque - ISO 14396192ft·lbf

Maximum Net Torque - ISO 9249191ft·lbf

Bore3.7in

Displacement201in³

Stroke4.7in

Note (1)Net power ratings are tested at the reference conditions for the specified standard.

Note (2)Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.

Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Note (4)Flywheel per the SAE reference conditions with the fan at maximum speed.

Note (5)The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.

Note (6)Stage V engine available for Europe only.

Emissions*The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards.

Operating Weight12677lb

NoteSpecifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured

Bucket Capacities0.75-1.5 m3 (1.0-2.0 yd3)

Bucket Capacities - ISO Coupler0.75-1.5 m3

Bucket Capacities - SSL Style Coupler1.0-2.0 yd3

General Purpose0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)

Light Material1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)

Multi-Purpose0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)

Grapple0.9 m³ (1.2 yd³) heaped

NoteAll capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

Cooling System4.5gal (US)

Fuel Tank20.6gal (US)

Engine Oil3gal (US)

Hydraulic Tank12.2gal (US)

Hydraulic System - Including Tank18.5gal (US)

Transmission - Gear Box2.2gal (US)

Maximum Flow - Implement Pump19gal/min

Maximum Flow - Implement Pump - Auxiliary Function Standard Flow19gal/min

Maximum Flow - Implement Pump - Auxiliary Function High Flow31gal/min

Maximum Working Pressure - Implement Pump3408psi

Relief Pressure - Tilt Cylinder Head4496psi

Relief Pressure - Tilt Cylinder Rod2756psi

3rd Function Maximum Working Pressure3408psi

Boost Flow Maximum Pressure3191psi

Lift Cylinder, Double Acting - Bore Diameter3in

Lift Cylinder, Double Acting - Rod Diameter2in

Lift Cylinder, Double Acting - Stroke27.4in

Tilt Cylinder, Double Acting - Bore Diameter3.5in

Tilt Cylinder, Double Acting - Rod Diameter2.2in

Tilt Cylinder, Double Acting - Stroke16.4in

Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift5.5s

Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height1.5s

Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level2.6s

Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time9.6s

Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift9.6s

Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height3s

Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level2.6s

Tipping Load - Straight - ISO 14397-19007lb

Tipping Load - Full Turn - ISO 14397-17339lb

Full Turn Tipping Load7716lb

Clearance - Full Lift and 45° Dump7.97ft

Reach - Full Lift and 45° Dump2.6ft

Steering Articulation Angle - Each Direction39°

Rated Bucket Capacity1.31yd³

Height - Ground to Cab**8.42ft

Height - Ground Clearance**11in

Length - Wheel Base7.08ft

Length - Overall*17.92ft

Reach - Bucket at 45°*2.33ft

Dig Depth**3.7in

Clearance - Bucket at 45° *8.08ft

Clearance - Level Bucket**9.92ft

Height - Bucket Pin**10.58ft

Departure Angle33°

Turning Radius - Over Bucket14.67ft

Turning Radius - Inside of Tires7.33ft

Width - Bucket6.67ft

Width - Tread Center4.58ft

Machine Width6ft

Articulation Angle39°

Dump Angle at Full Lift45°

Operating Weight12913lb

Note (1)*Vary with bucket.

Note (2)**Vary with tire.

Note (3)Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Height - Ground to Cab**8.42ft

Height - Ground Clearance**11in

Length - Wheel Base7.08ft

Length - Overall*18.42ft

Reach - Bucket at 45°*2.67ft

Dig Depth**4.2in

Clearance - Bucket at 45° *7.67ft

Clearance - Level Bucket**9.92ft

Height - Bucket Pin**10.58ft

Departure Angle33°

Turning Radius - Over Bucket14.67ft

Turning Radius - Inside of Tires7.33ft

Width - Bucket6.67ft

Width - Tread Center4.58ft

Machine Width6ft

Articulation Angle39°

Dump Angle at Full Lift45°

Operating Weight12913lb

Note (1)*Vary with bucket.

Note (2)**Vary with tire.

Note (3)Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Steering Articulation Angle - Each Direction39°

Steering Cylinder, Double Acting - Bore Diameter3.1in

Steering Cylinder, Double Acting - Rod Diameter1.4in

Steering Cylinder, Double Acting - Stroke11.8in

Nominal Flow - Steering Pump12gal/min

Maximum Working Pressure - Steering Pump3191psi

Maximum Steering Torque - 0° (Straight Machine)37155ft·lbf

Maximum Steering Torque - 39° (Full Turn)27747ft·lbf

Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm3s

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left<6 turns

ROPSROPS: ISO 3471:2008

FOPSFOPS: ISO 3449:2005 Level II

Note (1)Cat Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2)The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditi

Note (3)*The measurements were conducted with the cab doors and windows closed.

Forward - Range 16mile/h

Forward - Range 212mile/h

Forward - High Range22mile/h

Reverse - High Range22mile/h

Reverse - Range 16mile/h

Reverse - Range 212mile/h

Note (1)*Standard tire.

Note (2)Other tire choices available, contact your Cat dealer for details.

Note (3)In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.

Note (4)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Option (1)335/80 R18 XZSL Michelin

Option (2)340/80 R18 AT-R Firestone

Option (3)340/80 R18 XMCL Michelin

Option (4)340/80 R18 TRI2 Nokian

Option (5)340/80 R18 Bibload Michelin

Option (6)405/70 R18 SPT9 Dunlop*

Option (7)12.5/80 R18 Flexport™

Standard

18° frame oscillation, 78° articulation

Demand based cooling fan

Hydrostatic drive

Loader arm float function

Parallel lift Z-bar loader

Proportional auxiliary hydraulic circuit

Transmission, 20 km/h (12.4 mph) with heavy duty axles

Transmission inching function

Optional

100% differential lock on both axles, selectable on the move

Adjustable speed control (creeper control)

Adjustable high stat response settings

Electronic throttle lock

Ride control

Rimpull control

Speeder, 35 km/h (21.7 mph) with secondary steering

Standard

Cat C3.3B DIT EU Stage V/U.S. EPA Tier 4 Final engine.

Cat extended life coolant

Closed circuit breather

Easy quick release fuel filter/water separator

ECO mode

Engine oil drain valve (non-spill ECO drain)

Lockable engine compartments

Two stage air cleaner with visual indicator

Optional

Engine block heater 120V

Precleaner for engine air filter

Standard

Alternator 90 amp

Battery disconnect switch

Cab mounted fuse panel

Engine cold starter aid

Heavy duty battery, 12V

Service point connector for electronic diagnosis (Cat Electronic Technician)

Reversing alarm

Optional

Machine Security System (MSS)

Magnetic rotating beacon

Halogen working lights, two front and two rear

LED working lights, two front and two rear

Work tool wiring harness

Standard

E-coat paint primer

Pressure test points

Recovery hitch and pin

Scheduled Oil Sampling S·O·SSM ports

Optional

Custom color

Rear light guards

Tire options including heavy duty tires

Standard

Adjustable internal mirror

Adjustable wrist rest

Auxiliary power sockets

Coat hook

Cup holder

Digital service hour meter

Easy clean cab floor

Gauges: fuel hydraulic temperature, coolant temperature, speedometer

Multifunction joystick with direction control

On board digital display cluster

Operator station on isolation mounts

Retractable seat belt

ROPS and FOPS certified canopy/cab

Sound suppression

Sun visor

Suspended brake/accelerator pedals

Suspension seat

Two doors (enclosed cab)

Two external knock back mirrors

Warning indicators for major systems

Wiper/washer front and rear (enclosed cab)

Warnings: master, park brake, hydraulic oil pressure, engine oil pressure, coolant temp, electrical system, hydraulic filter bypass

Optional

Air conditioning

Cabin light

Cat Radio/FM/DAB+/Bluetooth/Aux/Mic/Phone/USB

Comfort cab includes: cloth suspension seat, heated rear window, sliding left window and radio ready

Open canopy: fixed steering column, coat hook, sun visor (North America only)

Deluxe cab includes: Comfort cab options plus heated cloth air suspension seat with lumbar support and right sliding window

Heated rear window (enclosed cab)

Heater with window side and feet vents (enclosed cab)

Radio ready kit including speakers (enclosed cab)

Rear blind

Optional

Cat extended life coolant (–50° C/–58° F)

Optional

Adjustable implement modulation

High flow auxiliary hydraulics with pressure relieving quick disconnect manifold

Load check valves

Return To Dig tool positioner

Optional

For all work tool options, consult your local Cat dealer

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.