986 Wheel Loader

Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.

Request a Quote

Engine Power - ISO 14396:2002449hp

Engine ModelCat® C15

Peak Power Speed1600

Gross Power - SAE J1995:2014456hp

Net Power - SAE J1349:2011373hp

Rated Speed2000

Rated Speed - 2,000 rpm - EEC 80/1269373hp

Rated Speed - 2,000 rpm - ISO 9249373hp

Bore5.4in

Stroke6.75in

Displacement927in²

Peak Torque (1,200 rpm) - SAE J1995:20141778lb/ft

Torque Rise16%

NoteTwo engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. • Net power advertised is the power avai

Operating Weight - Standard97785lb

Bucket Capacity Range5.0-10.3 m³ (6.5-13.5 yd³)

Operating Weight - High Lift104005lb

Rated Payload - Standard (Quarry Face)11ton (US)

Rated Payload - Loose Material (Standard)14ton (US)

Rated Payload - High Lift (Quarry Face)11ton (US)

Rated Payload - Loose Material (High Lift)12.1ton (US)

Cat Truck Match - Standard770/735/740/745

Cat Truck Match - High Lift772/773

Transmission TypeCat planetary power shift

Forward - 15mile/h

Forward - 28mile/h

Direct Drive - Forward 28mile/h

Direct Drive - Forward 314mile/h

Direct Drive - Forward 424mile/h

Reverse - 15mile/h

Reverse - 28mile/h

Direct Drive - Reverse 29mile/h

Direct Drive - Reverse 316mile/h

Direct Drive - Reverse 425.4mile/h

Lift/Tilt System - CircuitLoad Sense

Lift/Tilt System - Pump2 × 110 cc variable displacement

Maximum Flow at 2,165 rpm123gal/min

Relief Valve Setting - Lift/Tilt4050psi

Lift Cylinder - Bore7.5in

Lift Cylinder - Stroke45in

Tilt Cylinder - Bore6.7in

Tilt Cylinder - Stroke28.4in

Rack Back4.5s

Raise9s

Dump3.5s

Lower5.2s

Lower Float Down4.3s

Total Hydraulic Cycle Time21.3s

Steering System - CircuitLoad Sense

Steering System - PumpPiston, variable displacement

Maximum Flow at 1,400 rpm52gal/min

Steering Cut Off Pressure4000psi

Total Steering Angle70°

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co

FrontFixed

RearTrunnion

Oscillation Angle±12.5°

Oscillation Angle - Chain Arrangement±8.5°

BrakesISO 3450:2011

ROPS/FOPSROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Fuel Tank141gal (US)

Fuel Tank - Short Lift127gal (US)

Cooling Systems26gal (US)

Crankcase9gal (US)

Diesel Exhaust Fluid Tank6gal (US)

Transmission20gal (US)

Axle Oil - Differentials and Final Drives - Front49gal (US)

Axle Oil - Differentials and Final Drives - Rear45gal (US)

Hydraulic System Factory Fill87gal (US)

Hydraulic System - Tank Only34gal (US)

Operator Sound Pressure Level (ISO 6396:2008)73dB(A)

Machine Sound Power Level (ISO 6395:2008)113dB(A)

Machine Sound Power Level (ISO 6395:2008)**110dB(A)

Note (1)* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

Note (2)** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.

Note (3)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (4)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (5)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Operator Sound Pressure Level (ISO 6396:2008)74dB(A)

Machine Sound Power Level (ISO 6395:2008)113dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*73dB(A)

Machine Sound Power Level (ISO 6395:2008)**110dB(A)

Note (1)* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”

Note (2)** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.

Note (3)The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (4)The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.

Note (5)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Ground to Top of ROPS13.5ft

Ground to Top of Exhaust Stacks13.3ft

Ground to Top of Hood10.7ft

Ground to Center of Front Axle3.2ft

Ground to Fuel Tank Clearance2.3ft

Ground to Lower Hitch Clearance1.5ft

Reach - Maximum Lift7.1ft

Clearance at Maximum Lift10.1ft

B-Pin Height - Maximum Lift16.1ft

Maximum Overall Height - Bucket Raised22.4ft

Rear Axle - Centerline to Bumper10.3ft

Wheel Base12.5ft

Maximum Overall Length36.6ft

Front Axle Centerline to Bucket Tip13.8ft

Note

  • All dimensions are approximate.
  • Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Ground to Top of ROPS13.5ft

Ground to Top of Exhaust Stacks13.3ft

Ground to Top of Hood10.7ft

Ground to Center of Front Axle3.2ft

Ground to Fuel Tank Clearance2.3ft

Ground to Lower Hitch Clearance1.5ft

Reach - Maximum Lift7.4ft

Clearance at Maximum Lift11.6ft

B-Pin Height - Maximum Lift17.6ft

Maximum Overall Height - Bucket Raised23.9ft

Rear Axle - Centerline to Bumper10.3ft

Wheel Base12.5ft

Maximum Overall Length38ft

Front Axle Centerline to Bucket Tip15.3ft

Note

  • All dimensions are approximate.
  • Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

Ground to Top of ROPS13.5ft

Ground to Top of Exhaust Stacks13.3ft

Ground to Top of Hood10.7ft

Ground to Center of Rear Axle3.2ft

Ground to Fuel Tank Clearance2.3ft

Ground to Lower Hitch Clearance1.5ft

Reach at Maximum Lift8ft

Clearance at Maximum Lift10.7ft

B-Pin Height at Maximum Lift15ft

Maximum Overall Height, Bucket Raised20.9ft

Rear Axle Center Line to Bumper10.3ft

Wheel Base12.5ft

Maximum Overall Length35ft

Front Axle Centerline to Bucket Tip12.2ft

Ground to Top of ROPS13.5ft

Ground to Top of Exhaust Stacks13.3ft

Ground to Top of Hood10.7ft

Ground to Center of Rear Axle3.2ft

Ground to Fuel Tank Clearance2.3ft

Ground to Lower Hitch Clearance1.5ft

B-Pin Height at Maximum Lift15ft

Rear Axle Center Line to Bumper10.3ft

Wheel Base12.5ft

Maximum Overall Length35.4ft

Front Axle Centerline to Bucket Tip12.6ft

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Alarm, back-up

Alternator, single 145 amp

Batteries, maintenance-free

Converter, 10/15 amp, 24V to 12V

Lighting system (LED, work lights, access and service platform lighting)

Starting and charging system, 24V

Auxiliary jump start receptacle

Standard

Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings

Air conditioner

Cat Vision, rear vision camera system

Cat Production Measurement ready

Cab precleaner

Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port

Controls, lift and tilt function

Heater, defroster

Horn, electric

Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Powertrain oil temperature

Light, cab, dome

Lunchbox, beverage holders

Mirrors, rearview (externally mounted)

Seat, Cat Comfort (cloth), air suspension, six-way adjustable

Seat belt minder

Seat belt, retractable, 76 mm (3 in) wide

Steering and Transmission Integrated Control (STIC) System

UV glass

Transmission gear indicator

Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers

Lights, directional

Optional

Cat® Detect, object detection system

Cat Production Measurement

AM/FM/CD/MP3 radio

Satellite Sirius radio with Bluetooth

LED warning strobe

CB radio ready

Window pull down visor

Handrail mounted mirrors

Standard

Brakes, oil-cooled, multi-disc, service/secondary

Case drain screens

Crankcase guard

Electro hydraulic parking brake

Engine, C15 MEUI diesel, turbocharged/aftercooled

Ground level engine shutdown switch

Turbine precleaner, engine air intake

Starting aid, ether, automatic

Torque converter, Neutralizer

Transmission, planetary powershift, 4F/3R electronic control

Manual switch and automatic fuel priming

Optional

–50° C (–58° F) antifreeze

Engine oil change system, high speed, Wiggins

Engine block heater 120V or 240V

High ambient cooling – software

Standard

Automatic bucket lift kickout/positioner

Hydraulically driven demand fan

Couplings, Cat O-ring face seals

Doors, service access (locking)

Ecology drains for engine, radiator, hydraulic tank

Fuel tank, 535 L (141 gal)

Hitch, drawbar with pin

Hoses, Cat XT

Hydraulic, steering and brake filtration/screening system

Cat® Clean Emission Module

Oil sampling valves

Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)

Rear access to cab and service platform

Steering, load sensing

Toe kicks

Vandalism protection caplocks

Optional

Front and rear roading fenders

Fast fill fuel system (Shaw-Aero)

Cold Weather Starting (extra two batteries)

Optional

Aggregate Handler

Block Handler

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.

    *If you wish to be removed from receiving future communications, you can opt-out by texting STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, or UNSUBSCRIBE. Message and data rates may apply based on your mobile carrier’s plan. By opting into SMS communications from Blanchard Machinery, you agree to receive recurring text messages regarding account updates, order notifications, delivery notifications, and general support.