MH3040 Wheel Material Handler

MH3040 Wheel Material Handler

The Cat® MH3040 material handler is built to be powerful, reliable, and easy to use. With a comfortable cab and low maintenance costs, it helps optimize performance and boost productivity for operators. Designed with proven components, it helps provide the durability and power needed to handle tough jobs with confidence.

Request a Quote

Engine ModelCat C7.1

Net Power - ISO 9249202hp

Net Power - ISO 9249 (DIN)205hp (metric)

Engine Power - ISO 14396:2002201hp

Engine Power - ISO 14396 (DIN)204hp (metric)

Bore4in

Stroke5in

Displacement428in³

Biodiesel CapabilityUp to B20¹

EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time

Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Operating Weight85310lb

NoteOperating weight includes full fuel tank, 75 kg (165 lb) operator, grapple 2000 kg (4,410 lb) and single tires. Weight varies depending on configuration.

Maximum Reach50.8ft

BoomMH 9.3 m (30'6")

StickIndustrial 7.1 m (23'3")

Maximum Height57.4ft

Maximum Dump Height17.9ft

Maximum Depth17.3ft

Boom Pin Height40ft

Maximum Travel Speed11.2mile/h

Drawbar Pull34621lbf

Maximum Gradeability44%

Maximum Pressure - Implements5076psi

Maximum Pressure - Swing4061psi

Maximum Pressure - Travel5076psi

Swing Speed7r/min

Maximum Swing Torque60628lbf·ft

Fuel Tank Capacity125.2gal (US)

Cooling System6.6gal (US)

Engine Oil6.6gal (US)

Rear Axle - Housing (Differential)9gal (US)

Final Drive2gal (US)

Powershift Transmission0.8gal (US)

Hydraulic System - Including Tank86.9gal (US)

Hydraulic Tank38.8gal (US)

Diesel Exhaust Fluid (DEF) Tank10.8gal (US)

BoomMH 9.3 m (30'6")

StickIndustrial 7.1 m (23'3")

Shipping Length42ft

Machine Length20.8ft

Tail Swing Radius10.3ft

Counterweight Clearance5.7ft

Cab Height- Lowered12ft

Cab Height-Lowered with OPG12.5ft

Cab Height-Raised20.5ft

Cab Height-Raised with OPG21ft

Wheel Base10.5ft

Shipping Width9.8ft

Ground Clearance0.9ft

Undercarriage Length20.4ft

Note (1)The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.6 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.891 tons).

Recyclability95%

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Advanced sound suppressed Tip Over Protective Structure (TOPS) certified cab with rubber mounts

High-resolution 254 mm (10") LCD touch screen monitor

Automatic bi-level air conditioner

Jog dial and shortcut keys for monitor control

Keyless push-to-start engine control

Tilt-up left-side console

Heated seat with air suspension (Deluxe cab)

Heated and ventilated seat with air suspension (Premium cab)

Optional

Fixed one-piece front window and skylight (P5A classified)

Fixed two-piece front window and skylight (P8B classified)

Operator Protective Guards (OPG)

Standard

VisionLink®

Remote Flash and Remote Troubleshoot

Cat Payload

Standard

Maintenance-free battery

LED chassis light, left-hand/right-hand boom lights, cab lights - 1800 lumens

Centralized electrical disconnect switch

Programmable time delay LED working lights after engine shutdown

Optional

Generator, 20 kW with wiring to stick nose

Standard

Cat C7.1 diesel engine

Three selectable modes: Power, Smart, Eco

Up to 4500 m (14,760 ft) altitude capability with engine power derate above 3000 m (9,840 ft)

Cold start capability -18°C (0°F)

Reversible electric cooling fans

Cold start, ether start (N Am and Aus-NZ only)

Optional

Cold start, block heater (N Am only)

Standard

Boom and stick lowering control check valves

Boom and stick regeneration circuits

Electronic main control valve

Automatic hydraulic oil warm up

Heavy lift mode

Standard

Rear and right-hand-sideview cameras

Caterpillar One Key Security System

Travel alarm

Ground-level accessible secondary engine shutoff switch in cab

Signal/warning horn

2D E-fence

Cab Avoidance

Swing Assist

Rear window emergency exit

Optional

360° visibility

Standard

Grouped location for engine oil and fuel filters

Scheduled Oil Sampling (S·O·S℠) ports

Automatic lubrication system for implement and swing system

Standard

All wheel drive

Automatic brake/axle lock

Creeper speed

Electronic swing and travel lock

Heavy-duty axles, advanced disc brake system, and travel motor with adjustable braking force

Lockable, oscillating front axle with remote greasing point

Two speed hydrostatic transmission

Counterweight 7700 kg (16,975 lb)

Optional

16.00-25 single solid rubber tires

23.5-R25 single pneumatic tires

12.00-20 dual solid rubber tires

Hitch towing

Optional

10.4 m (34'9") Material Handler boom

9.3 m (30'6") Material Handler boom

9.9 m (32' 6") Barge boom

6.8 m (22'4") Log Loader boom (N Am only)

7.5 m (24'7") Industrial stick

7.1 m (23'3") Industrial stick

5.7 m (18'8") Industrial stick

6.4 m (21'0") Straight stick

4.1 m (13'3") Over/Under Log Loader stick (N Am only)

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.

    *If you wish to be removed from receiving future communications, you can opt-out by texting STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, or UNSUBSCRIBE. Message and data rates may apply based on your mobile carrier’s plan. By opting into SMS communications from Blanchard Machinery, you agree to receive recurring text messages regarding account updates, order notifications, delivery notifications, and general support.