Net Power - ISO 9249/SAE J1349171hp
Maximum Torque544lb/ft
Displacement268.5in³
Engine Power AWD (ISO 14396)128kW
Note (1)Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner,
EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards
Stroke5in
Derating Altitude9842ft
Bore4.1in
Engine ModelCat® C4.4
Torque Rise - ISO 929421%
Operating Weight - Typically Equipped31958lb
Blade Width12ft
Cutting Edge Width6in
Throat Clearance4.7in
Arc Radius16.3in
End Bit - Width152in
Blade Height20in
Engine Crankcase2gal (US)
Cooling System10.3gal (US)
Circle Drive without Slip Clutch0.4gal (US)
Hydraulic System14.5gal (US)
Circle Drive with Slip Clutch1.8gal (US)
Transmission4.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)3.2gal (US)
Fuel Tank71gal (US)
All-Wheel Drive (AWD) Weight36376lb
Length of Machine*391.4in
Maximum Height149.1in
Width94.6in
Note*Typically equipped with push block and ripper.
Blade Tip Range - Backward5°
Moldboard Sideshift - Right26.1in
Moldboard Sideshift - Left20.2in
Maximum Lift Above Ground16.1in
Circle Centershift - Left25.8in
Blade Tip Range - Forward40°
Circle Centershift - Right25.8in
Maximum Depth of Cut30.5in
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Recyclability92%
