Net Power973HP
Operating Weight294687lb
Operating Weight - Tier 2 Equivalent*294687lb
Rated Payload - High Lift27.5t
Operating Weight*294687lb
Cat Truck Match - Standard Lift777
Operating Weight - Tier 4 Final*294687lb
Rated Payload - Standard Lift30t
Cat Truck Match - High Lift777, 785
Bucket Range12.2-23.7 m3 (16.0-31.0 yd3)
Note* High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912).
Articulation Angle43°
Bucket Capacities12.2-23.7 m3 (16.0-31.0 yd3)
Transmission TypeCat Planetary Power Shift
Forward - 14.2mile/h
Forward - 27.4mile/h
Forward - 312.7mile/h
Reverse - 14.7mile/h
Reverse - 28.1mile/h
Reverse - 313.9mile/h
Direct Drive - Reverse 315.6mile/h
Direct Drive - Reverse 14.9mile/h
Direct Drive - Reverse 28.8mile/h
Direct Drive - Forward 314.1mile/h
Direct Drive - Forward 28mile/h
Direct Drive - Forward 1Lock-up disabled
Note50/65-51 BFOR (311-1938), calculated speeds.
FrontFixed
RearTrunnion
Oscillation Angle10 degrees
Fuel Tank573.3gal (US)
Cooling System80.2gal (US)
Crankcase31.7gal (US)
Transmission52gal (US)
Hydraulic System - Tank Only146gal (US)
Differential - Final Drives - Front127.3gal (US)
Differential - Final Drives - Rear127.3gal (US)
Hydraulic System Factory Fill230gal (US)
NoteHigh Lift configuration.
Lift/Tilt System - PumpVariable Piston
Cylinders - Lift/TiltDouble-acting
Relief Valve Setting - Lift/Tilt4200psi
Maximum Flow at 1,650 rpm311gal/min
Tilt Cylinder - Bore9.3in
Lift Cylinder - Bore10.5in
Lift/Tilt System - CircuitPositive Flow Control
Lift Cylinder - Stroke66.2in
Tilt Cylinder - Stroke40.9in
NoteHigh Lift configuration.
Lower3.8s
Rack Back2.4s
Lower Float Down3.1s
Total Hydraulic Cycle Time17.2s
Dump1.8s
Raise9.2s
NoteHigh Lift configuration, calculated speeds.
Total Steering Angle86°
Maximum Flow at 1,985 rpm (6900 kPa/1,000 psi)133gal/min
Relief Valve Setting - Steering5000psi
Steering System - CircuitClosed
Steering System - PumpPiston, variable displacement
Stroke6.4in
Displacement1959in³
Peak Torque - 1,250 rpm4034lb/ft
Net Power - EEC 80/1269973HP
Net Power - SAE J1349964HP
Gross Power - SAE J19951039HP
Bore5.7in
Rated Speed1800r/min
Net Power - ISO 9249973HP
Torque Rise33%
Net Power - ISO 143961024HP
EmissionsU.S. EPA Tier 4 Final
Engine ModelCat® C32 with ACERT™ Technology
NoteStandard ambient cooling.
Stroke6.4in
Gross Power - SAE J19951041HP
Peak Torque - 1,250 rpm4034ft-lb
Net Power - EEC 80/1269973HP
Bore5.7in
Net Power - ISO 143961024HP
Rated Speed1800r/min
Net Power - ISO 9249973HP
Displacement1959in³
Net Power - SAE J1349964HP
EmissionsU.S. EPA Tier 2 Equivalent
Torque Rise33%
Engine ModelCat C32 with ACERT Technology
NoteStandard ambient cooling.
Operator Sound Pressure - ANSI/SAE J1166 FEB0872dB(A)
Dynamic Operator Sound Pressure Level (ISO 6396:2008)70dB(A)
Note (1)Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated wi
Note (3)The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
Note (2)The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
