627K Wheel Tractor-Scraper

627K Wheel Tractor-Scraper

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

Solicitar presupuesto

Flywheel Power - Tractor/Scraper304 kW (407 hp)/216 kW (290 hp)

Scraper Capacity - Heaped24yd³

Top Speed - Loaded33.5mile/h

Width - Overall Machine141.1in

Width - Tractor133.1in

Width - Inside of Bowl120in

Width - Outside Rear Tires128.9in

Height - Overall Shipping158.6in

Height - Top of Cab142.6in

Ground Clearance - Tractor21.9in

Front of Tractor to Front Axle122.8in

Axle to Vertical Hitch Pin21.3in

Height - Scraper Blade Maximum20.5in

Wheel Base314.9in

Rear Axle - Rear of Machine114.1in

Length - Maximum (Push-Pull)613.2in

Width - Rear Tire Centers90.2in

Width - Overall Machine - Ladder Down149.2in

Length - Overall Machine - Standard551.8in

Overall Width11.71ft

Maximum Depth of Spread21.3in

Top Speed - Loaded33.5mile/h

Fuel Tank Refill Capacity - Scraper336gal (US)

180° Curb-to-Curb Turning Width38.71ft

Overall Shipping Height13.22ft

Scraper Capacity - Struck17.1yd³

Scraper Capacity - Heaped24yd³

Width - Cut10.3ft

Tires - Tractor Drive33.25R29**E3

Rated Load26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)

Maximum Depth of Cut12.4in

Tires - Scraper33.25R29**E3

Rated Engine RPM - Scraper2150r/min

Engine Model - ScraperCat C9.3

Rated Engine RPM - Tractor2000r/min

Flywheel Power - Scraper290HP

Flywheel Power - Tractor407HP

Engine Model - TractorCat C13

Note (1)C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.

Note (2)C9.3 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.

Hydraulic System21.926gal (US)

Crankcase - Tractor8.08gal (US)

Cooling System - Tractor11.89gal (US)

Transmission System - Tractor24.76gal (US)

Transmission System - Scraper12.944gal (US)

Crankcase - Scraper7.397gal (US)

Fuel Tank336.03gal (US)

Cooling System - Scraper16.114gal (US)

Operating Weight - Empty90213lb

Overall Length45.9ft

Operating Weight - Empty92980lb

Overall Length - With Bail Down51.1ft

Exterior Sound LevelThe exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).

ROPS/FOPSMeets ISO standards

Steering SystemISO 5010:2007

Reverse AlarmISO 9533:2010

Seat BeltSAE J386:JUN1985

BrakesISO 3450:2011

Falling Object Protective Structure (FOPS)ISO 3449:2005 Level II

Rollover Protection Structure (ROPS)ISO 3471:2008 for up to 17 084 kg (37,664 lb)

Transmission Gear - Third7.5mile/h

Transmission Gear - First3.1mile/h

Transmission Gear - Eighth33.5mile/h

Transmission Gear - Seventh24.8mile/h

Transmission Gear - Second5.5mile/h

Transmission Gear - Fifth13.6mile/h

Transmission Gear - Reverse5.7mile/h

Transmission Gear - Sixth18.4mile/h

Transmission Gear - Fourth10.1mile/h

Bowl Raise3s

Apron Lower3.8s

Apron Raise2.95s

Bowl Lower3.5s

Bail Raise1.8s

Ejector Retract6.7s

Bail Lower3.2s

Ejector Extend5.2s

Estándar

Standard and optional equipment may vary. Consult your Cat dealer for details.

Opcional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Estándar

Cat C13

Cat engine brake

Electric start, 24 Volt

Air cleaner, dry type with precleaner

Fan, hydraulic

Ground level engine shutdown

Radiator, aluminum unit core, 9 fins per inch

Guard, crankcase

Muffler (only for less or non-regulated regions engine arrangement only)

Starting aid, ether

Braking system:
– Primary and secondary, wet disc, hydraulic
– Parking, hydraulic-released, spring-applied
– Throttle lock

Transmission:
– 8-speed planetary power shift
– ECPC control
– APECS software
– Programmable top gear selection
– Transmission hold
– Differential lock
– Guard, power train
– Standard tire spin reduction
– Ground speed control
– Machine speed limit
– Differential lock protection

Estándar

Cat C9.3 engine with high pressure:
– Common rail fuel
– Cat engine brake
– Electric start, 24 volt
– Fan, driveline
– Ground engine shutdown
– Muffler (only for less or non-regulated regions engine arrangement only)
– Starting aid, ether

Braking system:
– Primary and secondary, wet disc, hydraulic
– 4 speed (torque converter drive)
– Transmission planetary powershift

Estándar

Alternator, 150 Amp

Batteries (4), 12V, 1,000 CCA, maintenance free, high output

Electrical system, 24V

Lighting system:
– Headlights, 3×3 halogen
– Turn signals with hazard function, LED floodlights, (2) 3×3 cutting edge (1) 3×3 bowl, halogen side vision (2) 3×3 halogen

Starting/charging receptacle

Estándar

Alarm, backup

Alternator, 65 Amp

Batteries (4), 12V, 1,000 CCA, maintenance free, high output

Lighting system:
– Brake lights, LED
– Turn signals with hazard function, LED

Starting/charging receptacle

Estándar

HVAC system, heat, AC, defrost

Thermostat control of HVAC system

Percha

Lunchbox platform with holding strap

Diagnostic connection (2)

12V power ports (2)

Differential lock (1)

Dome courtesy light

Horn, electric

T-Handle implement control

Mirror, rearview

Radio ready

ROPS/FOPS cab, pressurized

Keypad switches:
– Rear engine start
– Throttle lock
– Wipers/washers
– Hazard lights
– Retarding level select
– Work lights on, off
– Information mode on Messenger Display

Safety tab rocker switches:
– Regeneration control
– Parking brake

Seat belt, static two-piece

Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees

Steering wheel, tilt, telescoping, padded

Windows, right side emergency egress

Windows, sliding

Windows, laminated, zipped in

Windshield wipers, front and rear windows, includes washers

Door lock

Messenger Display

Gauges, warnings include:
– Coolant temperature
– Engine oil temperature
– Hydraulic oil temperature
– Fuel level
– Park brake
– Implement lockout
– Brake system
– Regeneration required
– Throttle lock
– System voltage
– Secondary steering
– Bail down
– Differential lock
– Apron float
– Transmission hold
– Cushion hitch
– High beam lights
– Action lamp
– Engine speed, rpm
– Gear selection

Estándar

Extended Life Coolant to –37° C (–34° F)

Estándar

Advanced cushion hitch

Accumulators (cushion hitch) with Canadian Registration Number (CRN)

Fast oil change

Fenders, non-metallic

Heater, engine coolant 120V

Rims (2)

Tow pin, front

Vandalism locks

Heater, engine coolant 120V

Estándar

Bowl
– 18.4 m³ (24 yd³), heaped
– 14.1 m³ (18.4 yd³), struck
– Fast oil change
– Vandalism locks
– Guard, overflow
– Heater, engine coolant 120V

Hydraulic position sensing cylinders (bowl lift and apron)

Estándar

Tractor/Scraper Arrangements
– Push Pull Arrangement

Fueling Arrangements
– Fast Fill Group

Opcional

Secondary Steering Arrangement

Opcional

Sequence Assist Arrangement

Load Assist

Cat Grade Control with Load Assist

Product Link Installation

Opcional

Camera arrangement – WAVS

Steering lock – external

Cab beacon

Air horn

Air horn and beacon

Wiring group

Year of manufacture plate

Opcional

HID work lights

Opcional

Cooling, high ambient HRC

Cooling, low ambient HRC

Cooling, high ambient LRC

Cooling, low ambient LRC

Opcional

Cab precleaner

Opcional

Film arrangement – U.S. (ANSI)

Film arrangement – International (ISO)

CONTACTO

SOLICITAR PRESUPUESTO

Rellene este formulario para obtener un presupuesto sobre el equipo que le interesa.

    *Si desea dejar de recibir comunicaciones en el futuro, puede darse de baja enviando un mensaje de texto a STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, o UNSUBSCRIBE. Pueden aplicarse tarifas de mensajes y datos en función del plan de su operador de telefonía móvil. Al optar por recibir comunicaciones SMS de Blanchard Machinery, acepta recibir mensajes de texto recurrentes sobre actualizaciones de cuenta, notificaciones de pedidos, notificaciones de entrega y asistencia general.

    Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad y las Condiciones del servicio de Google.

    Lo que obtiene: Una llamada telefónica de un representante o agente. Una estimación del coste de su máquina o del proyecto. Una consulta en persona si es necesario.