C15 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Solicitar presupuesto

Maximum Rating550 kVA

Minimum Rating365 kVA

Emissions/Fuel StrategyTier 2 or Tier 3

Voltage208 to 600 Volts

Frequency50 Hz

Speed1500 rpm

Duty CycleStandby, Prime

Engine ModelC15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore5.4in

Stroke6.75in

Displacement927.56in³

Compression Ratio16.1:1

AspirationAir to Air Aftercooled

Fuel SystemMEUI

Governor TypeAdem™A4

Length - Maximum150.8in

Width - Maximum58.3in

Height - Maximum86.3in

Estándar

Turbocharger

Aftercooler core

Air Cleaner - Non Canister disposable paper filter

Estándar

Air Cleaner

Estándar

GCCP 1.3

Estándar

Package mounted radiator

Estándar

Caterpillar Extended Life Coolant

Radiator and cooling fan with guard

Fan drive, battery charging alternator drive

Coolant drain line with valve

Opcional

Low coolant temperature alarm

Stone guards

Radiator duct flange

Estándar

Base, formed steel with single wall integral 8-hour fuel tank

Standard open set fuel tank / base supplied

Opcional

Industrial, Residential, Critical Mufflers

Estándar

Primary fuel filter with integral water separator

Secondary fuel filter

Fuel priming pump

Estándar

Engine fuel transfer pump

Primary fuel filter w/integral water separator & secondary filter

Fuel priming pump

Flexible fuel lines

Fuel cooler

Opcional

Fuel transfer system controls

Manual fuel transfer pump

Dual wall fuel tank base

Estándar

Matched to the performance and output characteristics of Cat engines

IP23 Protection

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Opcional

Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)

Oversize and premium generators

Anti-condensation heater

Estándar

Bus Bar

Opcional

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Estándar

Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre

Optional LC frame generator - IP23 Protection

Segregated low voltage (AC/DC) wiring panel

Integrated Voltage Regulator

Power center, IP22

Opcional

Permanent magnet generator

LC frame CIP generator

Oversize LC frame generator

Space heaters

CIP a frame generator

Oversize A frame generator

Ingress protection

A frame generator - IP21 Protection

LC frame generator

Estándar

Rubber vibration isolators

Estándar

Cat Electronic Governor (ADEM A4).

Estándar

Oil cooler

Oil drain valves

Opcional

Manual sump pump

Estándar

Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Opcional

Narrow skid base - replaces standard fuel tank base

Estándar

24 Volt battery with rack and cables

Opcional

Oversize batteries

Battery chargers

Jacket water heater

Heavy-duty starting system

Charging alternator

Estándar

Engine and alternator pre paint, Caterpillar yellow

Opcional

Narrow, Wide or Skid Base

Single or dual wall integral fuel tanks

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

The following options are based on regional and product configuration:

Automatic transfer switches (ATS)

Integral & sub-base UL listed dual wall fuel tanks

CSA Certification

EEC Declaration of Conformity

Single or dual wall sub-base fuel tanks

UL 2200 package

Sound attenuated, weather protective or high ambient weather protective enclosure

EU Certificate of Conformance (CE)

Opcional

Single element air cleaner

Dual element air cleaner

Opcional

EU certificate of conformance

Global certification for CIS

Opcional

Shunt trip for IEC circuit breaker

4 Pole (IEC-100% rated) circuit breakers - Package mounted

Auxiliary contacts, circuit breaker

3 Pole (IEC-100% rated) circuit breakers - Package mounted

3 Pole (IEC-100% rated) circuit breakers - Motorised

Power terminal strip

4 Pole (IEC-100% rated) circuit breakers - Motorised

Pad-lockable circuit breaker device

Opcional

Fuel level sensor

Volt free contacts

Oil temperature displays

Local annunciator

GCCP 1.4

Local alarm horn

Remote annunciator

Opcional

High ambient sound attenuated enclosures

Sound attenuated enclosures

Opcional

6 and 8 inch elbow kit

Manifold and turbocharger guard

End in / End out mufflers - 10, 25 and 35 dBA attenuation

Engine mounted muffler

6 and 8 inch flange GP

Flexible exhaust fittings

Opcional

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Opcional

5 Amp single battery charger

Jacket water heater

Interruptor de desconexión de la batería

CONTACTO

SOLICITAR PRESUPUESTO

Rellene este formulario para obtener un presupuesto sobre el equipo que le interesa.

    *Si desea dejar de recibir comunicaciones en el futuro, puede darse de baja enviando un mensaje de texto a STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, o UNSUBSCRIBE. Pueden aplicarse tarifas de mensajes y datos en función del plan de su operador de telefonía móvil. Al optar por recibir comunicaciones SMS de Blanchard Machinery, acepta recibir mensajes de texto recurrentes sobre actualizaciones de cuenta, notificaciones de pedidos, notificaciones de entrega y asistencia general.

    Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad y las Condiciones del servicio de Google.

    Lo que obtiene: Una llamada telefónica de un representante o agente. Una estimación del coste de su máquina o del proyecto. Una consulta en persona si es necesario.