C4.4 Generator Set – 110 to 480 Volts

C4.4 Generator Set – 110 to 480 Volts

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Solicitar presupuesto

Maximum Rating110 kVA

Minimum Rating50 kVA

Emissions/Fuel StrategyEU Stage II & R96/EUIIIa

Voltage110 to 480 Volts

Frequency50 Hz

Speed1500 rpm

Duty CycleStandby, Prime

Engine ModelCat® C4.4

Bore4.1in

Stroke5in

Displacement268.5in³

Compression Ratio16.2:1, 17.25:1, 18.2:1 or 18.3:1

AspirationTurbocharged

Fuel SystemDirect Injection or Common Rail

Governor TypeMechanical

Length - Maximum75.8in

Width - Maximum44.1in

Height - Maximum53.6in

Estándar

Air cleaner; light duty with disposable element

Estándar

Coolant drain line with valve

Caterpillar extended life coolant

Radiator and cooling fan with guards

Fan drive, battery charging alternator drive

Opcional

Coolant heater

Low coolant temp alarm

Low coolant level shutdown

Estándar

Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Estándar

Standard open set fuel tank / base supplied base, formed steel with single wall integral 8-hour fuel tank

Estándar

GCCP 1.3

Estándar

Voltage regulator (single phase sensing)

Tower panel, IP22, bottom cable entry

IP23 protection

Circuit breaker, IEC, 3 pole, mounted in tower panel

12 Leads

Segregated low voltage (AC/DC) wiring panel

Estándar

Mechanical and electrical governing system - model dependent

Estándar

Captive linear vibration isolators between base and engine-generator

Includes lifting provision and drag points

Termination points for coolant and lube oil drain lines

Estándar

Batteries

24V battery with rack and cables

Estándar

Engine and alternator pre-paint, Caterpillar Yellow

Estándar

Oil drain line with valve

Lubricating oil

Opcional

3 phase sensing

Anti-condensation heater

R frame auxilliary winding

LC frame alternator

Quadrature droop kit

Permanent magnet

LC frame alternator with coastal insulation protection

Opcional

Circuit Breaker Upgrades - 4 Pole circuit reaker to 250A, 400A and 630A

Opcional

GCCP 1.3

Opcional

Earth fault (2 wire only)

Opcional

Sound attenuated Level 2 enclosure

Rental pack - CAE rental option only

Socket blanking plate - CAE rental option only

CEE form sockets - CAE rental option only

Sound attenuated Level 1 (galv)

Opcional

Upgrade to STD set for CE

Opcional

High fuel level alarm

Low fuel level shutdown

Skidbase for CALG enclosure sets

Bunded fuel tank

Low fuel level alarm

Open set narrow base

Compact skidbase for open set

Opcional

Certification for CIS

Opcional

Silencer installation kit

Electronic governor

Residential siliencer

External single point lift - enclosure

Battery removal

Industrial silencer

Opcional

Circuit breakers, UL listed

Opcional

PGS test report @ 1.0 power factor

PGS test report @ 0.8 power factor

Opcional

Stone guards / rad trans flange

Packing case - canopied set

Packing case - compact set

CONTACTO

SOLICITAR PRESUPUESTO

Rellene este formulario para obtener un presupuesto sobre el equipo que le interesa.

    *Si desea dejar de recibir comunicaciones en el futuro, puede darse de baja enviando un mensaje de texto a STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, o UNSUBSCRIBE. Pueden aplicarse tarifas de mensajes y datos en función del plan de su operador de telefonía móvil. Al optar por recibir comunicaciones SMS de Blanchard Machinery, acepta recibir mensajes de texto recurrentes sobre actualizaciones de cuenta, notificaciones de pedidos, notificaciones de entrega y asistencia general.

    Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad y las Condiciones del servicio de Google.

    Lo que obtiene: Una llamada telefónica de un representante o agente. Una estimación del coste de su máquina o del proyecto. Una consulta en persona si es necesario.