Join the Blanchard Team..
Apply Now
Maximum Rating60 ekW
Minimum Rating60 ekW
Emissions/Fuel StrategyU.S. EPA Cert., Tier 3
Voltage208 to 600 Volts
Frequency60 Hz
Speed1800 rpm
Duty CycleStandby
Engine ModelC4.4, In-line 4, 4-cycle diesel
Bore4.1in
Stroke5in
Displacement269in
Compression Ratio16.7:1
AspirationTurbocharged
Fuel SystemElectronic (adjustable)
Governor TypeMechanical, ADEM™A4
Length - Maximum77.2in
Width - Maximum43.3in
Height - Maximum48in
Dry Weight - Genset (maximum)2054lb
Standard
IBC seismic and wind Certifications
Optional
IBC seismic and wind Certifications
Standard
Air cleaner
Cartridge type air filter
Optional
Cartridge type air filter
Standard
Breakers (100% UL rated)
3-Pole 100% rated
Second circuit breaker box
Power terminal strip
Optional
Breakers (100% UL rated)
3-Pole 100% rated
Second circuit breaker box
Power terminal strip
Standard
NFPA battery charger UL10A 120VAC
Optional
NFPA battery charger UL10A 120VAC
Standard
GCCP 1.2 Control panel
Standard
Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Optional
10, 25 and 35 dBA silencer systems
Overhead silencer mounting kit
Standard
Standard open set fuel tank/base supplied base, formed steel with single wall integral 24-hour fuel tank
Optional
Emergency vent pipe
Tank riser
5 Gallon spill containment
209 and 394 gallon sub-base fuel tanks
5 Gallon fill containment
Standard
WSS1 Low coolant level shut down
FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected
NFPA110 bundle includes:
WCA1 Low coolant temperature alarm
A Coolant heater, remote annunciator or 0.8 power factor test may be required depending on the application
PBC10NU NFPA battery charger
Oil temperature gauge and sender
PAA1 Panel mounted audible alarm
Ground fault relay
Remote E-stop button
Remote annunciator module
Audible alarm
Volt free contacts genset run and common alarm
Discrete I/O module
Overload shutdown via breaker
Low coolant temperature alarm
Protective devices:
Fuel level reading
Low coolant level shutdown
Optional
NFPA110 bundle includes: FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected - WSS1 Low coolant level shut down - WCA1 Low coolant temperature alarm - PAA1 Panel mounted audible alarm - PBC10NU NFPA battery charger - A Coolant heater ,remote annunciator or 0.8 power factor test may be required depending on the application
Ground fault relay
Remote E-stop button
Volt free contacts genset run and common alarm
Oil temperature gauge and sender
Audible alarm
Remote annunciator module
Protective devices: Low coolant temperature alarm - Low coolant level shutdown - Fuel level reading - Overload shutdown via breaker
Discrete I/O module
Standard
Coolant drain line with valve
Fan drive, battery charging alternator drive
Caterpillar extended life coolant
Radiator and cooling fan with guards
Radiator stone guard
Optional
Radiator transition flange
Standard
12 Leads
Standard
Mechanical and electrical governing system - model dependent
Standard
Oil drain line with valve
Lubricating oil
Standard
Engine and alternator pre-paint, Caterpillar yellow
Standard
Batteries
24V battery with rack and cables
Optional
R Frame auxilliary winding
Optional
Sound attenuated enclosure, Level 1
External emergency stop
Sound attenuated Level 2 Enclosure (White)
Panel viewing window
Optional
Battery heater
Jacket water heater
Coolant heater
Anti-condensation heater
Wiring for canopy space heater
Lube oil sump heater
Optional
Permanent magnet excitation (PMG) generator
Cat Alternator
Optional
Seismic vibration isolators
Optional
4 Hour factory test
Generator test report
PGS Test report @ 0.8 power factor
PGS Test report @ 1.0 power factor
Complete this form to get a quote on the equipment you are interested in.
