Continuous Rating2519 / 2500 ekW @ 1.0pf

Fuel TypeNatural Gas, Hydrogen Blend (up to 25%)

Maximum Electrical Efficiency45.30%

Frequency50 / 60 Hz

RPM1500

Frequency50/60 Hz

Engine ModelG3520H

Displacement5956in³

AspirationTA

Bore6.7in

Stroke8.5in

Compression Ratio12.1

Length302in

Width86in

Height97in

Dry Weight - Genset54675lb

Estándar

EMCP 4.3

Opcional

16 Point/32 Light Annunciator, Shipped Loose

Remote Communications Module (PL1000T, PL1000E)

Remote annuciator

Local PC Monitorring

Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay

Cat Connect: Ehternet, Satellite, Cell Telematics

Engine failure relay

Local alarm module

Synchronizing module

Remote PC Monitorring

Estándar

Two-element single-stage air cleaner with enclosure and service indicator

Opcional

Mounting Brackets and Piping

Air cleaner with precleaner

Estándar

Engine driven water pumps for jacket water and aftercooler

Jacket water and SCAC thermostats

ANSI/DN customer flange connections for JW inlet and outlet

Opcional

Inlet/Outlet connections

Coolant level drain line with valves, fan with guard

Estándar

LSI Long-Time, Short-Time, Instantaneous Annunciator

Rear-mounted

5000A 3-Pole IEC Rated Circuit Breakers

Opcional

MP- Frame 6 Pole Bottom Cable Entry

4000/5000A Neutral Current Transformer Automatic Selection

No UV trip or package mounted CB Wiring

Frame Mounting

Estándar

Center section cooled turbocharger with Cat flanged outlet

Dry exhaust manifolds, insulated and shielded

Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns

Opcional

Muffler and spark-arresting muffler with companion flanges

Flange

Elbow

Flexible Fitting

Exhaust Expander

Estándar

Electronic fuel metering valve

Throttle plate, 24V DC actuator, controlled by GECM

Opcional

Gas Knockdown Regulator

Fuel filter

Gas pressure regulator

Gas shutoff valve 24V, ETR (Energized-To-Run)

Estándar

Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

Estándar

Electronic Ignition System (controlled by ADEM A4)

Individual Cylinder Detonation Sensitive Timing (DST)

Estándar

Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control

SR4B

Crankshaft Vibration Damper and Guard

Busbar connections

Paint- Caterpillar Yellow except rails gloss black

Winding temperature detectors

Operation and maintenance manuals

Parts book

Anti-condensation space heater

RH Service

SR5

Reactive droop

Opcional

Bearing temperature detectors

Cable access box

Low voltage extension box

Manual voltage control

European bus bar

Generator air filter

Medium and high voltage generators and attachment

Estándar

ADEM A4 4-20mA (0-5VV) Speed Input

Opcional

Digital diagnostic tool

Special paint order

Tool set

US AID Emblem

Opcional

Battery with cables and rack (shipped loose)

24V starting motors

Jacket water heater

60A, 24V charging alternator (requires engine driven pumps)

Opcional

60 Hz: USA

50 Hz: Germany, Great Britain, Belgium, Romania, Italy, Ireland, Poland, Netherlands, Spain, France, and European Standard

CONTACTO

SOLICITAR PRESUPUESTO

Rellene este formulario para obtener un presupuesto sobre el equipo que le interesa.

    *Si desea dejar de recibir comunicaciones en el futuro, puede darse de baja enviando un mensaje de texto a STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, o UNSUBSCRIBE. Pueden aplicarse tarifas de mensajes y datos en función del plan de su operador de telefonía móvil. Al optar por recibir comunicaciones SMS de Blanchard Machinery, acepta recibir mensajes de texto recurrentes sobre actualizaciones de cuenta, notificaciones de pedidos, notificaciones de entrega y asistencia general.

    Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad y las Condiciones del servicio de Google.

    Lo que obtiene: Una llamada telefónica de un representante o agente. Una estimación del coste de su máquina o del proyecto. Una consulta en persona si es necesario.