Cat?� 3508 Fire Pump

Cat?� 3508 Fire Pump

Cat?� 3508 Industrial Diesel Fire Pump Engines, with ratings: 709-794 kW (950-1065 hp) @ 1460-1750 rpm, are non-certified, not FM Approved, and not UL Listed. They are available for global non-regulated areas. Starting on demand is a must for a fire pump engine – always. Cat?� fire pump engines have a reputation for reliable starts and long efficient service. The Cat line of fire engine pumps covers a wide range of installations.

Solicitar presupuesto

Maximum Power1065hp

Rated Speed1460-1750 rpm

Minimum Power950hp

EmissionsNon-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed

Engine ConfigurationV-8, 4-Stroke-Cycle Diesel

Bore6.7in

Stroke7.5in

Displacement2105in³

Compression Ratio13.0:1

AspirationTurbocharged Aftercooled (TA)

Rotation from Flywheel EndCounterclockwise

Aftertreatment-

Length92.5in

Height74.9in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments11805lb

Estándar

Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.

Turbocharger, rear mounted

Jacket water aftercooled

Estándar

Charging alternator 24 volt, 35 amp

Governor, RH, 3161 with self contained synthetic oil sump

Air-fuel ratio control

Mechanical speed control, without torque control

Governor control

Positive locking

Estándar

Thermostats and housing

Jacket water pump, centrifugal

Estándar

Exhaust manifold, dry

Estándar

SAE No. 0 flywheel

151 flywheel teeth

SAE No. 0 flywheel housing

SAE standard rotation

Estándar

Fuel filter, with service indicators, cartridge type with RH service

Fuel transfer pump

Estándar

Instrument Panel, RH

Engine oil pressure gauge

Fuel pressure gauge

Oil filter differential gauge

Jacket water temperature gauge

Service meter, electric

Tachometer

Estándar

Crankcase breather, top mounted

Oil cooler

Oil filler

Oil dipstick

Oil pump

Oil filter, cartridge type with RH service

Shallow oil pan

Fumes disposal (not installed)

Estándar

Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.

Included on selected top level engines

Estándar

Accessory drive, upper RH

Front housing, single sided

Estándar

Junction box

Manual shutoff, RH

Safety shutoff protection, energized to shutdown

Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)

Water temperature

Overspeed

3161 governor solenoid energized to shutdown

Estándar

Starting switch

Estándar

Vibration damper

Lifting eyes

Paint: Caterpillar yellow, with optional colors available at request

CONTACTO

SOLICITAR PRESUPUESTO

Rellene este formulario para obtener un presupuesto sobre el equipo que le interesa.

    *Si desea dejar de recibir comunicaciones en el futuro, puede darse de baja enviando un mensaje de texto a STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, o UNSUBSCRIBE. Pueden aplicarse tarifas de mensajes y datos en función del plan de su operador de telefonía móvil. Al optar por recibir comunicaciones SMS de Blanchard Machinery, acepta recibir mensajes de texto recurrentes sobre actualizaciones de cuenta, notificaciones de pedidos, notificaciones de entrega y asistencia general.

    Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad y las Condiciones del servicio de Google.

    Lo que obtiene: Una llamada telefónica de un representante o agente. Una estimación del coste de su máquina o del proyecto. Una consulta en persona si es necesario.