C1.5 Marine Generator Set Engine

Power Range10 - 12 ekW

Frequency50 / 60

Minimum Rating10 ekW (10 kVA)

Speed1500 / 1800 rpm

EmissionsU.S. EPA Tier 3

ConfigurationInline 3, 4-Stroke Cycle diesel

Displacement91in³

AspirationNaturally Aspirated

Governor TypeElectrical Isochronous

Bore3.31in

Stroke3.5in

Refill CapacityLube Oil System w/oil filter change: 6 L (1.6 gal)

Oil Change Interval500 hrs

Rotation from Flywheel EndCounterclockwise

CoolingHex or Single Circuit Keel

Length40.8 in / 1,038 mm (open) 43.1 in / 711 mm (enclosed)

Width21.1 in / 535 mm (open) 24.0 in / 608 mm (enclosed)

Height27.1 in / 535 mm (open) 27.9 in / 711 mm (enclosed)

Engine Dry Weight703 lb / 319 kg

Estándar

Single element air cleaner

Water-cooled exhaust manifold

Single or Three phase brushless generator

12 or 24 volt electric starting motor

12 volt 55 amp alternator

Single sided service points

Anti-vibration mounts.

Electronic automatic safety shutdowns

Opcional

Sound attenuated enclosure (Factory Fit or Upgrade Kit)

Keel cooling kit

Basic, Deluxe and remote panel options

AC circuit breakers

Flexible fuel lines

Primary fuel filter/water separator

Siphon break

Exhaust system components

Insulated electrical system

CONTACTO

SOLICITAR PRESUPUESTO

Rellene este formulario para obtener un presupuesto sobre el equipo que le interesa.

    *Si desea dejar de recibir comunicaciones en el futuro, puede darse de baja enviando un mensaje de texto a STOP, QUIT, END, REVOKE, OPT-OUT, CANCEL, o UNSUBSCRIBE. Pueden aplicarse tarifas de mensajes y datos en función del plan de su operador de telefonía móvil. Al optar por recibir comunicaciones SMS de Blanchard Machinery, acepta recibir mensajes de texto recurrentes sobre actualizaciones de cuenta, notificaciones de pedidos, notificaciones de entrega y asistencia general.

    Este sitio está protegido por reCAPTCHA y se aplican la Política de privacidad y las Condiciones del servicio de Google.

    Lo que obtiene: Una llamada telefónica de un representante o agente. Una estimación del coste de su máquina o del proyecto. Una consulta en persona si es necesario.