3516 Diesel Generator Set

Standby Rating1750 ekW

Prime Power Rating1600 ekW

Emissions/Fuel StrategyLow Fuel Consumption

Voltage380 to 480 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby, Mission Critical, Prime, Continuous

Maximum Rating1750 ekW

Minimum Rating1450 ekW

Engine Model3516 TA, V-16, 4-Stroke Water-Cooled Diesel

Bore6.69in

Stroke7.48in

Displacement4210.64in³

Compression Ratio13.5:1

AspirationTA

Fuel SystemMechanical unit injection

Governor TypeWoodward

Length - Maximum234.4in

Width - Maximum90in

Height - Maximum94.9in

Dry Weight - Genset (maximum)28840lb

Standard

Air cleaner; single element canister type

Optional

Dual element air cleaner

Single element filter

Standard

Auto/start/stop control

Engine cycle crank

Generator set packages include Caterpillar's voltage regulator

Speed adjust

IVR includes reactive droop capability, 3-phase voltage sensing, KVAR / PF modes, RFI suppression, min / max exciter. Limiter and exciter diode monitor

24 Volt DC operation

Engine cool-down timer

Text alarm/event descriptions

Emergency stop pushbutton

Environmental sealed front face

EMCP 4.2B

Generator mounted - rear facing

Controls:

Lamp test

Alarm acknowledge

PLC functionality

Load histogram feature

Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy

ATAAC - 3516E package radiators shipped installed

3 Analog inputs

1 programmable digital outputs

Accessory module data link

1 programmable relay outputs (Form C)

Customer data link (Modbus RTU)

Serial annunciator module data link

Cat connect

Digital indication for:

Reverse reactive power (kVAr) (32RV)

Number of I/O varies on options selected

Certified standard PGS provided

6 Customer programmable digital inputs

RPM

4 programmable relay outputs (Form A)

Communications:

Operating hours

Overcurrent (50/51)

Volts (L-L & L-N)

Frequency (Hz)

Oil pressure (psi, kPa or bar) - Coolant temperature - Volts (L-L & L-N) - Frequency (Hz) - Amps (per phase & average) - Power factor (per phase & average) - kW (per phase, average & percent) - kVA (per phase, average & percent) - kVAr (per phase, average & percent) - kW-hr (total) - kVAr-hr (total)

Coolant temperature

kVAr (per phase, average & percent)

kVA (per phase, average & percent)

Amps (per phase & average)

kW (per phase, average & percent)

Power factor (per phase & average)

kW-hr (total)

kVAr-hr (total)

Warning/shutdown with common LED indication of shutdowns for:

Emergency stop

Failure to start (overcrank)

High coolant temperature

Low oil pressure

Overspeed

Programmable protective relaying functions

Low coolant level

Low coolant temperature

Over/under voltage (27/59)

Generator phase sequence

Over/under frequency (81 o/u)

Reverse power (kW) (32)

Optional

EMCP 4.3, EMCP 4.4

Local annunciator module: [ ] NFPA 110 [ ] Custom

Standard

ADEM A3

Standard

Flanged faced outlet(s)

Dry exhaust manifold

Optional

Y Adapters

Flanges

Flange and exhaust expanders

Exhaust offset

Clean emission parts

Tier 4 clean emissions module

Flexible fittings

Mufflers

Tier 4 clean emission MOD Kits

Elbows

Tier 4 dosing cabinet

Standard

Fuel priming pump

Flexible fuel lines - shipped loose

Fuel cooler; not included with packages without radiator

Secondary fuel filters

Optional

Primary fuel filter

Fuel priming pumps (Tier 4) - Manual or electric

Standard

Caterpillar yellow with high gloss black rails and radiator

SAE standard rotation

Right hand servicing

Flywheel and flywheel housing - SAE No. 00

Optional

Special paint (Colors other than Caterpillar yellow or high performance paints)

The following options are based on regional and product configuration:

UL 2200 package

US aid emblem

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Standard

Winding temperature detectorsle pattern

Busbar connections, right side extension box, bottom cable entry

Busbar connections, top center mounted, top cable entry

Winding temperature detectors

High voltage:

Form wound

Random wound

Busbar connections, top center mounted, top cable entry

Permanent magnet excitation (PMG)

NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby)

Anti-condensation space heater

NEMA standard hole pattern

Permanent magnet excitation (PMG)

Form wound

Winding temperature detectors

3 Phase brushless, Salient pole

Six lead

Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby)

Low voltage:

Internal excitation (IE)

Medium voltage:

NEMA standard hole pattern

NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby

Standard

Parts book

Operation & Maintenance Manual

Standard

Oil filter, filler and dipstick

Oil drain lines and valve

Lubricating oil

Gear type lube oil pump

Integral lube oil cool

Fumes disposal

Optional

Prelube pumps

Lube oil in standard sump

Oil level regulator

Standard

Rubber anti-vibration mounts - shipped loose

Rails - Engine/generator/radiator mounting

Anti-vibration mounts (shipped loose)

Optional

Puck style low efficiency isolators

Spring type vibration isolators

IBC vibration isolators

Standard

Battery disconnect switch

24 Volt electric starting motor

Battery and battery rack w/cables

45 Amp Charging alternator

Optional

Standard ambient radiators

Standard ambient ATAAC radiators

Optional installed ATAAC radiators

Coolant

Optional installed radiators

Water level switch gauges

Optional

Starting motors: [ ] Standard [ ] Heavy duty

Muffler: [ ] Industrial Grade

Air cleaner: [ ] Single element air cleaners [ ] Dual element air cleaners [ ] Heavy duty air cleaners

Starting aids: [ ] 220V 50 Hz Jacket water heater

Batteries: [ ] Standard (1400 CCA) [ ] Heavy Duty (2800 CCA)

Optional

Ventilation system

No explosion relief valves

Explosion relief valves

Optional

Temperature rise (over 40°C ambient): [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C

Optional

Circuit breaker rating: [ ] 2000A [ ] 2500A [ ] 3200A [ ] 4000A

Circuit breaker operation: [ ] Electrical

Power termination: [ ] Busbar [ ] Circuit breaker

Circuit breaker trip unit: [ ] LSI [ ] LSIG [ ] LSIG-P

Optional

Alternator air cleaner

Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

High voltage: 12470, 13200, 13800 volts, 3 phase 1800 rpm,FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame

High voltage: 6300, 6600, 6900 volts, 3 phase 1800 rpm, FW, PM, No. of Leads = 6, Pitch = .6667: 2700, 3000 Frame

Low / Medium voltage: 380, 416, 440, 480, 600, 2400, 4160 Volts, 3 Phase 1800 RPM, FW, PM, No. of Leads = 6, Pitch = .6667: 1600, 1800 Frame

Thermostat for space heater

Generator conversion

Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames

Differential current transformers (DCT)

Low / Medium voltage: 380, 440, 480, 600 volts, 3 phase 1800 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

Differential current transformers (DCT) 8.7 kV and 15 kV classes

Space heater

Optional

Extended Service Contract (ESC): [ ] 2 Year [ ] 3 Year [ ] 5 Year

Optional

Pyrometer and thermocouples

Optional

Neutral ground connections

Center post busbars

Right side power connections

Rear power connections

Low voltage Circuit breakers

Ground cables between generator and terminal box

Left side power connections

2700 Frame, four lead, four terminal

Optional

Generator test report

Fuel consumption test

Standard engine test charge

OSHPD Certification

Canadian Standards Association certification

PGS Test report @ 1.0 power factor

Generator set fuel consumption test

Torsional vibration analysis reports

IBC Certification

PGS Test report @ 0.8 power factor

Optional

Electric starting motors

Air pressure regulator

Engine barring device

Starter cover

10, 20, 35 and 50 Amp Battery chargers

24 Volt battery set - Dry

Jacket water heaters

Air starting motors

Optional

Platinum, Gold and Silver coverage