3608 Generator Set (Medium Speed)

Maximum Rating2660 ekW

Minimum Rating1830 ekW

Emissions/Fuel StrategyLow Fuel Consumption

Frequency60 Hz

Speed720 & 900 rpm

Duty CycleStandby, Prime, Continuous

Engine Model3608 I-8,4-Stroke Water-Cooled Diesel

Bore11in

Stroke11.8in

Displacement9064in³

Compression Ratio13:01

AspirationTA

Fuel SystemDirect unit injection

Governor TypeGenerator Set Monitoring System (GMS)

Length - Maximum404in

Width - Maximum99.62in

Height - Maximum156.6in

Dry Weight - Genset (maximum)91050lb

Standard

Aftercooler, fresh water, corrosion resistant coated (air side)

Air inlet shutoff

Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated

Breather, crankcase, top-mounted

Standard

Engine coolant water drains

Water temperature regulator

Jacket water thermostats

Optional

Auxiliary water pump

Heating aids

Cooling system aids

Expansion tank

Standard

Includes adapter, flexible exhaust fitting

457 mm (18 in) Cat bolt pattern

Dry, gas tight, exhaust manifold

Optional

Weld flange and related hardware

Flexible exhaust fittings

Standard

Simplex or duplex

Optional

Fuel priming pump

Duplex primary fuel strainer

Fuel system connections

Standard

Custom generator per generator data sheet completed by dealer

Optional

Class F insulation

Anti-condensation space heaters

3 Phase, six Leads, WYE

Winding temperature detectors

Busbar connections

Standard

UG Actuator

Optional

Battery backup/power supply

2301 A load share

Electronic/actuators

Digital programmers

EGB actuator

723 Plus

Standard

Oil filler and dipstick

Service side engine mounted on cylinder block inspection covers

Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan

Centrifugal oil filters with single shutoff

Oil pressure regulating valve

Crankcase explosion relief valves

Optional

Lube ANSI adapter (Emergency connection)

Oil pan drain valve

Standard

Engine and generator mounting

Damper, torsional vibration

Optional

Spring type vibration isolators

Non-vertically restrained

Vertically restrained

Isolator

Standard

Air silencer

One motor, engine mounted at rear, on left side

Vane type air starter

Line group for single point custom connection

Optional

Pressure reducing valve

Compressed air flex hose

Standard

Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water

Paint, Caterpillar yellow

Optional

Custom paint colors

Optional

Heavy duty air cleaner

Air inlet adapter

Boost control valve

Air cleaner louver assembly

Vertical support bracket

Soot filter