C15 Generator Set

Maximum Rating550 kVA

Minimum Rating365 kVA

Emissions/Fuel StrategyTier 2 or Tier 3

Voltage208 to 600 Volts

Frequency50 Hz

Speed1500 rpm

Duty CycleStandby, Prime

Engine ModelC15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore5.4in

Stroke6.75in

Displacement927.56in³

Compression Ratio16.1:1

AspirationAir to Air Aftercooled

Fuel SystemMEUI

Governor TypeAdem™A4

Length - Maximum150.8in

Width - Maximum58.3in

Height - Maximum86.3in

Standard

Turbocharger

Aftercooler core

Air Cleaner - Non Canister disposable paper filter

Standard

Air Cleaner

Standard

GCCP 1.3

Standard

Package mounted radiator

Standard

Caterpillar Extended Life Coolant

Radiator and cooling fan with guard

Fan drive, battery charging alternator drive

Coolant drain line with valve

Optional

Low coolant temperature alarm

Stone guards

Radiator duct flange

Standard

Base, formed steel with single wall integral 8-hour fuel tank

Standard open set fuel tank / base supplied

Optional

Industrial, Residential, Critical Mufflers

Standard

Primary fuel filter with integral water separator

Secondary fuel filter

Fuel priming pump

Standard

Engine fuel transfer pump

Primary fuel filter w/integral water separator & secondary filter

Fuel priming pump

Flexible fuel lines

Fuel cooler

Optional

Fuel transfer system controls

Manual fuel transfer pump

Dual wall fuel tank base

Standard

Matched to the performance and output characteristics of Cat engines

IP23 Protection

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Optional

Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)

Oversize and premium generators

Anti-condensation heater

Standard

Bus Bar

Optional

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Standard

Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre

Optional LC frame generator - IP23 Protection

Segregated low voltage (AC/DC) wiring panel

Integrated Voltage Regulator

Power center, IP22

Optional

Permanent magnet generator

LC frame CIP generator

Oversize LC frame generator

Space heaters

CIP a frame generator

Oversize A frame generator

Ingress protection

A frame generator - IP21 Protection

LC frame generator

Standard

Rubber vibration isolators

Standard

Cat Electronic Governor (ADEM A4).

Standard

Oil cooler

Oil drain valves

Optional

Manual sump pump

Standard

Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Optional

Narrow skid base - replaces standard fuel tank base

Standard

24 Volt battery with rack and cables

Optional

Oversize batteries

Battery chargers

Jacket water heater

Heavy-duty starting system

Charging alternator

Standard

Engine and alternator pre paint, Caterpillar yellow

Optional

Narrow, Wide or Skid Base

Single or dual wall integral fuel tanks

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

The following options are based on regional and product configuration:

Automatic transfer switches (ATS)

Integral & sub-base UL listed dual wall fuel tanks

CSA Certification

EEC Declaration of Conformity

Single or dual wall sub-base fuel tanks

UL 2200 package

Sound attenuated, weather protective or high ambient weather protective enclosure

EU Certificate of Conformance (CE)

Optional

Single element air cleaner

Dual element air cleaner

Optional

EU certificate of conformance

Global certification for CIS

Optional

Shunt trip for IEC circuit breaker

4 Pole (IEC-100% rated) circuit breakers - Package mounted

Auxiliary contacts, circuit breaker

3 Pole (IEC-100% rated) circuit breakers - Package mounted

3 Pole (IEC-100% rated) circuit breakers - Motorised

Power terminal strip

4 Pole (IEC-100% rated) circuit breakers - Motorised

Pad-lockable circuit breaker device

Optional

Fuel level sensor

Volt free contacts

Oil temperature displays

Local annunciator

GCCP 1.4

Local alarm horn

Remote annunciator

Optional

High ambient sound attenuated enclosures

Sound attenuated enclosures

Optional

6 and 8 inch elbow kit

Manifold and turbocharger guard

End in / End out mufflers - 10, 25 and 35 dBA attenuation

Engine mounted muffler

6 and 8 inch flange GP

Flexible exhaust fittings

Optional

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Optional

5 Amp single battery charger

Jacket water heater

Battery disconnect switch