D550 GC (60 Hz) Generator Set

Standby Rating550 ekW

Frequency60 Hz

Emissions/Fuel StrategyU.S. EPA Tier 2 Certified

Voltage480 to 600 Volts

Speed1800 rpm

Duty CycleStandby

Engine ModelCat® C18 In-line 6, 4-cycle diesel

Bore5.7in

Stroke7.2in

Displacement1106in³

Compression Ratio14.5:1

AspirationTurbocharged Air-to-Air Aftercooled

Fuel SystemMEUI

Governor TypeADEM™A4

Length - Maximum196.1in

Width - Maximum73.4in

Height - Minimum79.1in

Height - Maximum100.9in

Dry Weight - Genset (minimum)8776.6lb

Dry Weight - Genset (maximum)11464lb

Standard

Air cleaner - Non canister, disposable

Aftercooler core

Turbocharger

Optional

Air cleaner (Non canister disposable)

Standard

GCCP 1.2

Standard

Jacket water pump, gear driven, centrifugal

Radiator, package mounted

Radiator sight gauge

Thermostats and housing

Blower fan and fan drive with guards

Coolant drain valve

Optional

Jacket water heater with pump

Coolant heater

Stone guards

Standard

Exhaust manifold - dry

Optional

Flexible exhaust connection

Manifold and turbocharger guards

8" Muffler - 25 dBA attenuation

Standard

Fuel priming pump

Primary fuel filter w/integral water separator and secondary filter, spin on

Engine fuel transfer pump

Fuel cooler

Integral tank base, 24 hours, UL142

Optional

Integral 8 hour tank base

Standard

Complete system designed & built at ISO 9001:2000 certified facilities

All protective devices and control functions simulated and checked

Factory tested to design specifications at full load conditions

Standard

Insulation system, Class H

Standard winding protection for non-harsh environments with relative humidity ? 95%

Terminal box, IP22 RHS facing, bottom cable entry

IP23 Protection

6 Leads

Voltage regulator (single phase sensing)

Easy access to AVR and terminals

Brushless, self-excited 2/3 pitch (600V uses Internal excitation (IE))

Standard

Cat electronic governor (ADEM A4)

Standard

Lubricating oil, CK-4 (10W-30)

Oil cooler

Oil drain with valve

Shallow oil pan

Oil filter, spin on

Fumes disposal to front of radiator

Oil filler and dipstick

Optional

Manual sump pump

Standard

Captive linear vibration isolators between base and engine-generator

Includes lifting provisions and termination points for coolant and lube oil drain lines

Standard

Safety shutoff - Overspeed

Safety shutoff - Low oil pressure

Safety shutoff - High water temperature

Standard

24-volt electric starting motor

24V, 45 Amp Charging alternator

Standard

Lifting eyes

Parts book

Vibration damper

Optional

CSA Certification

Extended Service Coverage

UL2200 Certification

Generator test report

Tool set

Optional

Integral tank base, 24 hours, UL142

Fuel tank pill pipe & lockable cap

Audio & visual fuel alarm (@90% fuel level)

5 Gallon Spill Containment

Overfill prevention valve

Wide Base - Skid

Optional

400A LS/I

1200A LS/I

Auxiliary contacts

800A LSI

800A LS/I

600A LSI

600A LS/I

400A LSI

1200A LSI

Optional

Volt free contacts

20A GFCI (Ground Fault Circuit Interrupter)

16 -light NFPA 99/110 Annunciator

Twist release, Red button emergency stop

Product link remote monitoring hardware

100A Load center

Ground fault relay

Audible alarm Gp

Annunciators box

Remote E-Stop button

Local annunciator

Discrete I/O module

Volt free contact

Earth (Ground) fault relay

Optional

Sound attenuated Level 2 enclosure (White)

AC & DC Source lights

E-Stop

Sound attenuated enclosure

Optional

Space heater

Permanent magnet excitation (PMG) generator

Optional

Standard battery set: 1000 CCA, 90 amp/hr.

Battery charger (UL Certified)

Jacket water heater

Oversize battery set, 1400 CCA, 200 amp/hr

Optional

Single LSI motorised circuit breaker

Auxiliary contacts

Neutral bar (208V)

Optional

Audio & visual fuel alarm

Optional

Oversize battery set

Battery disconnect switch

5 Amp Battery charger

Standard battery set

Optional

UL2200 Listed

CSA 22.2

Seismic