Standard
EMCP 4.2B
Customer data link (Modbus RTU)
2 Programmable relay outputs (Form C)
Features:
Voltage adjust
Failure to start (overcrank)
Volts (L-L & L-N)
Reverse power (kW) (32)
Accessory module data link
Over / under voltage (27 / 59)
Speed adjust
Low coolant temperature
Oil pressure (psi, kPa or bar)
Environmental sealed front face
Generator temperature monitoring module
DC volts
Serial annunciator module data link
Reverse reactive power (kVAr) (32RV)
Amps (per phase & average)
High coolant temperature
24-volt DC operation
Communications
Power Factor (per phase & average)
Compatible with the following optional modules:
Low coolant level
Text alarm / event descriptions
Digital I/O module
6 programmable digital inputs
Low oil pressure
Remote Serial annunciator
Engine cycle crank
Local annunciator
Digital indication for:
Over / under Frequency (81 o/u)
Generator phase sequence
Emergency stop
kVAr (per phase, average & percent)
Run / Auto / Stop Control
Operating hours
kVA (per phase, average & percent)
Warning / shutdown with common LED indication of shutdowns for:
Emergency stop pushbutton
Frequency (Hz)
coolant temperature
Overspeed
4 programmable relay outputs (Form A)
kW-hr (total)
2 Programmable digital outputs
Remote CAN annunciator
Overcurrent (50 / 51)
kW (per phase, average & percent)
RPM
Programmable protective relaying functions:
Optional
Generator temperature monitoring package
EMCP 4.4
First local annunicators
Vandal proof panel door
Remote custom annunicators
EMCP 4.3
Local discrete I/O package
Common alarm / shutdown relay
Ground fault relay
Generator running VFC
