3516B Generator Set – 380 to 11000 Volts

Prime Power Rating2275/2000 kVA

Continuous Rating2000/1750 kVA

Emissions/Fuel StrategyLow Fuel Consumption

Voltage380 to 11000 Volts

Frequency50 Hz

Speed1500 rpm

Duty CyclePrime, Continuous

Maximum Rating2275 kVA

Minimum Rating1750 kVA

Engine Model3516B TA, V-16, 4-Stroke Water-Cooled Diesel

Bore6.69in

Stroke7.48in

Stroke - HD8.46in

Displacement4210.64in

Displacement - HD4764.73in³

Compression Ratio14.0:1 Std 15.5:1 HD

AspirationTA

Fuel SystemElectronic unit injection

Governor TypeAdem™4

Length - Minimum278.2in

Length - Maximum292in

Width - Maximum90in

Height - Maximum92.9in

Dry Weight - Genset (minimum)33300lb

Dry Weight - Genset (maximum)36280lb

Standard

Air cleaner, single element canister type

Optional

Dual element air cleaner

Standard ambient radiators

Single element Filter

Standard ambient ATAAC radiators

Optional radiator arrangements

Standard

Low oil pressure

Over / under frequency (81 o/u)

Alarm acknowledge

Oil pressure (psi, kPa or bar)

Reverse reactive power (kVAr) (32RV)

3 Analog inputs

Programmable protective relaying functions:

4 Programmable relay outputs (Form A)

Overspeed

Reverse power (kW) (32)

Customer data link (Modbus RTU)

Text alarm / event descriptions

Low coolant temperature

Number of I/O varies on options selected:

Emergency stop

Operating hours

Limiter and exciter diode monitor

Environmental sealed front face

kW (per phase, average & percent)

Digital indication for:

Auto / star t/ stop control

Cat Connect

Low coolant level

Controls:

Serial annunciator module data link

Regulator (IVR) - IVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter

RPM

Volts (L-L & L-N), frequency (Hz)

Coolant temperature

1 Programmable digital outputs

Speed adjust

Engine cycle crank

Over / under voltage (27/59)

kW-hr (total)

6 Customer programmable digital inputs

Generator phase sequence

1 Programmable relay outputs (Form C)

PLC functionality

kVAr-hr (total)

DC volts

Engine cool-down timer

24 Volt DC operation

Generator mounted - rear facing

High coolant temperature

Amps (per phase & average)

Load histogram feature

Emergency stop pushbutton

Warning / shutdown with common LED indication of shutdowns for:

kVAr (per phase, average & percent)

Customizable screens

True RMS AC metering, 3-phase, +/-2% accuracy

Overcurrent (50/51)

Communications:

kVA (per phase, average & percent)

Power Factor (per phase & average)

Failure to start (overcrank)

Accessory module data link

Lamp test

Generator set packages include Caterpillars Voltage

Standard

Exhaust flange outlet

Optional

Exhaust mufflers

Standard

Primary fuel filter with integral water separator

Standard

IP23 Protection

Optional

Permanent magnet excitation (PMG)

Oversize and premium generators

Internal excitation (IE)

Anti-condensation heater

Standard

Busbar

Optional

Circuit breakers - LV packages

Circuit breakers, UL listed

2000, 2500, 3200 Amp, 3 Pole, IEC rated circuit breakers

Circuit breakers, IEC compliant

2000, 2500, 3200 Amp, 4 Pole, IEC rated circuit breakers

1600, 2000, 2500, 3000 and 4000 Amp, 3 Pole, UL-100% rated circuit breakers

Standard

EMCP 4 Genset Controller

Standard

Package mounted radiator

Optional

Water level switch gauges

Coolant

Standard

Dry exhaust manifold

Flanged faced outlet(s)

Optional

Tier 4 dosing cabinet

Y Adapters

Flanges

Flange and exhaust expanders

Elbows>

Mufflers

Tier 4 lean emissions moduel

Clean emission parts

Flexible fittings

Tier 4 clean emission MOD kits

Exhaust offset

Standard

Fuel priming pump

Fuel cooler; not included with packages without radiator

Flexible fuel lines - shipped loose

Secondary fuel filters

Optional

Gas fuel filter

Primary fuel filter

Fuel priming pump (Tier 4)

Standard

SAE Standard Rotation

Paint - Caterpillar yellow except rails and radiators gloss black

RH Service

Flywheel and Flywheel housing-SAE No. 00

Optional

The following options are based on regional and product configuration:

UL 2200 package

EEC Declaration of Conformity

CSA Certification

Enclosures: sound attenuated, weather protective

EU Certificate of Conformance (CE)

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Integral & sub-base UL listed dual wall fuel tanks

Automatic transfer switches (ATS)

Integral & sub-base fuel tanks

Standard

Matched to the performance and output characteristics of Cat engines

Random wound

Busbar connections, right side extension box, bottom cable entry - 60 Hz models: NEMA standard hole pattern

Permanent magnet

LV

HV:

MV:

6 Lead

Winding temperature detectors

NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby) - 60 Hz models: NEMA standard hole pattern

Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)

3 Phase brushless, salient pole

Anti condensation space heater

NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby)

Form wound

Optional

1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm ,FW, PM, No. of leads = 6, Pitch = .6667

Hi voltage optional attachments

Differential current transformers

1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm, RW, PM, No. of leads = 6, Pitch = .6667

Generators high voltage

Space heater kit

Generator conversions

1600 Frame - 380, 400, 415 Volts, 3 Phase 1500 rpm, RW, IE, No. of leads = 6, Pitch = .6667

2700 Frame - 6300, 6600, 6900 Volts, 3 Phase 1500 rpm, FW, PM, No. of leads = 6, Pitch = .6667

3000 Frame - 10000, 10500, 11000 Volts, 3 Phase 1500 rpm, FW, PM, No. of leads = 6, Pitch = .6667

1800 Frame

Alternator air cleaner

Standard

ADEM A3

Standard

Gear type lube oil pump

Oil filter, filler and dipstick

Oil drain lines and valve

Integral lube oil cooler

Lubricating oil

Fumes disposal

Optional

Prelube pump groups

Oil level regulator

Lube oil in standard sump

Standard

Rails - engine / generator / radiator mounting

Rubber anti-vibration mounts (shipped loose)

Anti-vibration mounts (shipped loose)

Optional

IBC vibration isolators

Puck style low efficiency isolators

Spring type vibration isolators

Standard

45 Amp charging alternator

24 Volt electric starting motor

Battery disconnect switch

Battery and battery rack w/cables

Optional

Load share module

Empty upper box

Generator main terminal box

Annunciator - remote

EMCP 4.3, EMCP 4.4

Digital I/O module

Cable Shroud

Remote monitoring software

Vandal proof panel cover

Side extension box

Generator temperature monitoring & protection

Annunciator - local

Optional

IBC isolators

Spring-type vibration isolator

Optional

No explosion relief valves

Explosion relief valve

Crankcase ventilation systems

Crankcase protection groups:

Optional

Charging alternator

Battery chargers

Oversize batteries

Heavy-duty starting system

Jacket water heater

Air starting motor with control and silencer

Optional

Platinum, Silver and Gold coverage

Optional

Pyrometer and Termocouples

Optional

Cable entry - right side

Cable entry - rear

Grounding groups

left side power connections

Neutral ground connections

Center post busbar

Right side power connections

Cable entry - left side

Rear power connections

Optional

Standard engine test

Torsional vibration analysis

Fuel consumption test

PGS test report @ 1.0 power factor

OSPD certification

PGS test report @ 0.8 power factor

Generator set report

Optional

Engine barring devices

Electric starting motors

Jacket water heaters

Starter covers

Batteries, racks and cables

Air pressure regulator

10, 20, 35 Amp battery chargers

50 Amp NFPA battery charger

Air starting motors