3516C Generator Set – 380 to 11000 Volts

3516C Generator Set – 380 to 11000 Volts

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

Maximum Rating3125 kVA

Minimum Rating2250 kVA

Emissions/Fuel StrategyU.S. EPA Cert., Tier 2 - 1808 rpm

Voltage380 to 11000 Volts

Frequency50 Hz

Speed1808 rpm

Duty CycleStandby, Mission Critical

Engine Model3516C, ATAAC, V-16, 4-Stroke Water-Cooled Diesel

Bore6.69in

Stroke8.46in

Displacement4765in³

Compression Ratio14.7:1

AspirationATAAC

Fuel SystemElectronic unit injection

Governor TypeAdem™A3

Length - Minimum332.3in

Length - Maximum336.2in

Width - Maximum100.5in

Height - Maximum136.9in

Dry Weight - Genset (minimum)46077lb

Dry Weight - Genset (maximum)47620lb

Standard

Air cleaner; single element canister type

Optional

Dual element air cleaner

Single element filter

Standard

Package mounted radiator

Standard

Exhaust flange outlet

Optional

Exhaust mufflers

Standard

Primary fuel filter with integral water separator

Fuel priming pump

Standard

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Optional

Anti-condensation heater

Oversize and premium generators

Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)

Standard

Busbar

Optional

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Standard

EMCP 4 Genset Controller

Standard

24 Volt DC operation

EMCP 4.2B

Environmental sealed front face

RFI suppression

Caterpillar' s Voltage Regulato

Emergency stop pushbutton

3 Phase voltage sensing

Generator set packages include:

Text alarm / event descriptions

Generator mounted - rear facing

KVAR / PF modes

IVR includes reactive droop capability

Min / max exciter

Limiter and exciter diode monitor

Speed adjust

Controls:

Engine cycle crank

Auto / start / stop control

Alarm acknowledge

Engine cool

PLC functionality

Load histogram feature

Lamp test

Customizable screens

Digital indication for:

3 Phase

RPM

0 True RMS AC metering

+/- 2% accuracy

DC volts

Operating hours

Coolant temperature

Amps (per phase & average)

Volts (L-L & L-N)

Oil pressure (psi, kPa or bar)

Power Factor (per phase & average

Frequency (Hz)

kVAr (per phase, average & percent)

kVA (per phase, average & percent

kW (per phase, average & percent)

Warning/shutdown with common LED indication of shutdowns for: Low oil pressure - High coolant temperature - Overspeed - Emergency stop - Failure to start (overcrank) - Low coolant temperature - Low coolant level -

kVAr-hr (total)

Low oil pressure

kW-hr (total)

Cat Connect

Failure to start (overcrank)

Overcurrent (50/51)

Communications:

Low coolant temperature

Reverse reactive power (kVAr) (32RV)

Low coolant level

6 Customer programmable digital inputs

1 Programmable relay outputs (Form C)

High coolant temperature

4 Programmable relay outputs (Form A)

Programmable protective relaying functions:

Number of I/O varies on options selected:

1 Programmable digital outputs

Serial annunciator module data link

Accessory module data link

Over / under frequency (81 o/u)

Over / under voltage (27/59)

Overspeed

3 Analog inputs

Generator phase sequence

Reverse power (kW) (32)

Optional

EMCP 4.3, EMCP 4.4

Standard

ADEM A3

Standard

ATAAC - 3516E Package radiators shipped installed

Certified standard PGS provided

Optional

Standard ambient radiators

Coolant

Optional installed ATAAC radiators

Optional installed radiators

Water level switch gauges

Standard ambient ATAAC radiators

Standard

Dry exhaust manifold

Flanged faced outlet(s)

Optional

Y-Adapters

Mufflers

Exhaust offset

Flexible fittings

Tier 4 clean emission MOD Kits

Flange and exhaust expanders

Elbows

Tier 4 clean emissions module

Clean emission parts

Tier 4 dosing cabinet

Flanges

Standard

Flexible fuel lines - shipped loose

Fuel cooler; not included with packages without radiator

Secondary fuel filters

Optional

Fuel Priming Pumps (Tier 4) - Manual or electric

Primary Fuel Filter

Standard

Right hand servicing

Paint - Caterpillar Yellow except rails and radiators gloss black

Flywheel and flywheel housing - SAE No. 00

Caterpillar yellow with high gloss black rails and radiator

SAE Standard rotation

Optional

The following options are based on regional and product configuration:

UL 2200 package

Enclosures: sound attenuated, weather protective

EEC Declaration of Conformity

US aid emblem

CSA Certification

Integral & sub-base fuel tanks

EU Certificate of Conformance (CE)

Integral & sub-base UL listed dual wall fuel tanks

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Special paint (Colors other than Caterpillar yellow or high performance paints)

Automatic transfer switches (ATS)

Standard

Permanent magnet

Low Voltage: Random wound - Internal Excitation - Winding temperature detectors - NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby) - Busbar connections, top center mounted, top cable entry - NEMA standard hole pattern

Winding temperature detectors

Permanent magnet

Busbar connections, right side extension box, bottom cable entry

6 Lead

Form wound

NEMA standard hole pattern

Medium Voltage:

Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)

NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime/150C standby)

High voltage:

Anti condensation space heater

3 Phase brushless, salient pole

Standard

English

Standard

Integral lube oil cool

Gear type lube oil pump

Fumes disposal

Oil drain lines and valve

Oil filter, filler and dipstick

Lubricating oil

Optional

Lube oil in standard sump

Oil level regulator

Prelube pumps

Standard

Anti-vibration mounts (shipped loose)

Rubber anti-vibration mounts (shipped loose)

Rails - engine / generator / radiator mounting

Optional

Puck style low efficiency isolators

IBC vibration isolators

Spring type vibration isolators

Standard

Battery disconnect switch

45 Amp charging alternator

24 Volt electric starting motor

Battery and battery rack w/cables

Optional

No explosion relief valves

Explosion relief valves

Ventilation system

Optional

Load share module

Digital I/O module

Generator temperature monitoring & protection

Remote monitoring software

Optional

IBC isolators

Optional

Oversize batteries

Air starting motor with control and silencer

Battery chargers

Heavy-duty starting system

Charging alternator

Jacket water heater

Optional

Generator conversion

Space heater

Thermostate for space heater

Differential current transformers (DCT) 8.7 kV and 15 kV classes

Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame

Alternator air cleaner

Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames

Optional

Pyrometer and thermocouples

Optional

Neutral ground connections

Left side power connections

Low voltage circuit breakers

Ground cables between generator and terminal box

2700 Frame, four lead, four terminal

Rear power connections

Center post busbar

Right side power connections

Optional

Fuel consumption test

Generator set fuel consumption test

generator test report

Canadian Standards Association certification

Torsional vibration analysis reports

PGS test report @ 1.0 power factor

IBC certification

Standard engine test charge

PGS test report @ 0.8 power factor

OSHPD certification

Optional

Air pressure regulator

Air starting motors

Jacket water heaters

10, 20, 35 and 50 amp battery chargers

Starter cover

Engine barring device

Electric starting motors

24 Volt battery set - Dry

Optional

Platinum, Gold and Silver coverage

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.