3606 Generator Set (Medium Speed)

Maximum Rating2000 ekW

Minimum Rating1650 ekW

Emissions/Fuel StrategyLow Fuel Consumption

Frequency60 Hz

Speed900 rpm

Duty CycleStandby, Prime, Continuous

Engine Model3606 I-6,4-Stroke Water-Cooled Diesel

Bore11in

Stroke11.8in

Displacement111in³

Compression Ratio13:01

AspirationTA

Fuel SystemDirect unit injection

Governor TypeGenerator Set Monitoring System (GMS)

Length - Maximum404in

Width - Maximum99.62in

Height - Maximum156.6in

Dry Weight - Genset (maximum)74970lb

Standard

Breather, crankcase, top-mounted

Aftercooler, fresh water, corrosion resistant coated (air side)

Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated

Air inlet shutoff

Standard

Jacket water thermostats

Engine coolant water drains

Water temperature regulator

Optional

Heating aids

Cooling system aids

Expansion tank

Auxiliary water pump

Standard

457 mm (18 in) Cat bolt pattern

Includes adapter, flexible exhaust fitting

Dry, gas tight, exhaust manifold

Optional

Weld flange and related hardware

Flexible exhaust fittings

Standard

Simplex or duplex

Optional

Duplex primary fuel strainer

Fuel priming pump

Fuel system connections

Standard

Custom generator per generator data sheet completed by dealer

Optional

Class F insulation

3 Phase, six Leads, WYE

Busbar connections

Anti-condensation space heaters

Winding temperature detectors

Standard

UG Actuator

Optional

EGB actuator

723 Plus

Electronic/actuators

Battery backup/power supply

Digital programmers

2301 A load share

Standard

Centrifugal oil filters with single shutoff

Oil pressure regulating valve

Service side engine mounted on cylinder block inspection covers

Oil filler and dipstick

Crankcase explosion relief valves

Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan

Optional

Oil pan drain valve

Lube ANSI adapter (Emergency connection)

Standard

Damper, torsional vibration

Engine and generator mounting

Optional

Vertically restrained

Isolator

Spring type vibration isolators

Non-vertically restrained

Standard

Vane type air starter

One motor, engine mounted at rear, on left side

Air silencer

Line group for single point custom connection

Optional

Compressed air flex hose

Pressure reducing valve

Standard

Paint, Caterpillar yellow

Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water

Optional

Custom paint colors

Optional

Air inlet adapter

Air cleaner

Vertical support bracket

Heavy duty air cleaner

Boost control valve

Air cleaner louver assembly

Soot filter