C18 Generator Set

Maximum Rating600 ekW

Minimum Rating455 ekW

Emissions/Fuel StrategyU.S. EPA Cert., Tier 2

Voltage208 to 600 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby, Prime

Engine ModelC18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore5.71in

Stroke7.2in

Displacement1106.4l

Compression Ratio14.5:1

AspirationAir to Air Aftercooled

Fuel SystemElectronic unit injection

Governor TypeAdem™A4

Length - Maximum5550in

Width - Maximum80.9in

Height - Maximum107.8in

Standard

Air cleaner

Standard

Turbocharger

Light duty air cleaner

Aftercooler core

Optional

Single element air cleaner

Dual element air cleaner

Standard

Caterpillar extended life coolant

Fan drive, battery charging alternator drive

Coolant drain line with valve

Radiator and cooling fan with guard

Package mounted radiator

Standard

Exhaust flange outlet

Optional

Industrial, residential, critical mufflers

Standard

Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Optional

8 and 10 inch GP flanges

8 and 10 inch elbow kits

Engine mounted muffler

10, 25 and 35 end in / end out mufflers

Manifold and turbocharger guards

Standard

Standard 8 hour open set fuel tank

Optional

Manual fuel transfer pump

Fuel transfer system

Integral - Dual wall fuel tank base

Standard

Secondary fuel filters

Fuel priming pump

Primary fuel filter with integral water separator

Standard

Matched to the performance and output characteristics of Cat engines

Segregated low voltage (AC/DC) wiring panel

Power center, IP22

A Frame generator - IP21 protection

Integrated voltage regulator (IVR)

Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

Integrated voltage regulator (IVR)

Optional

Space heaters

A Frame CIP generator

Permanent magnet excitation (PMG)

LC frame generator

A Frame oversize generator

Ingress protection

LC frame CIP generator

LC frame oversize generators

Standard

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Optional

Oversize and premium generators

Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

Anti-condensation heater

Standard

Busbar

Optional

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Standard

GCCP 1.2

Optional

Local alarm modules

Volt free contact

Local alarm horn

Remote annunciator module

Oil temperature displays

Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor

GCCP 1.5

Standard

Cat electronic governor (ADEM A4)

Standard

EMCP 4 Genset controller

Standard

Lubricating oil

Oil drain valves

Optional

Manual sump pump

Standard

Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines

Standard

Rubber vibration isolators

Standard

24 Volt battery with rack and cables

24 volt starting motor

Batteries

Optional

Jacket water heater

Battery chargers

Heavy duty starting system

Oversize batteries

Charging alternator

Standard

Engine and alternator pre-paint, Caterpillar yellow

Paint - Caterpillar yellow except rails and radiators gloss black

Optional

Sound attenuated, weather protective or high ambient weather protective enclosure

Integral & sub-base UL listed dual wall fuel tanks

CSA Certification

Automatic transfer switches (ATS)

The following options are based on regional and product configuration:

Single or dual wall sub-base fuel tanks

EU Certificate of Conformance (CE)

EEC Declaration of Conformity

UL 2200 package

Single or dual wall integral fuel tanks

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Narrow, wide or skid base

Enclosures: Sound attenuated, weather protective

Optional

3 Pole (IEC-100% rated) Circuit breakers - Motorised

4 Pole (IEC-100% rated) Circuit breakers - Motorised

Shunt trip for IEC breaker

Power terminal strip

Circuit breaker (IEC) Auxiliary contacts

3 Pole (IEC-100% rated) Circuit breakers - Package mounted

Padlockable circuit breaker device

4 Pole (IEC-100% rated) Circuit breakers - Package mounted

Optional

Remote monitoring software

Load share module

Local & remote annunciator modules

GCCP 1.2, GCCP 1.5

Digital I/O module

Optional

Low coolant temperature alarm

Radiator duct flange

Optional

Sound attenuated enclosures

Optional

Battery disconnect switch

Jacket water heaters

5 Amp Battery charger