D350 GC (60 Hz) Generator Set

Maximum Rating350 ekW

Minimum Rating350 ekW

Emissions/Fuel StrategyEPA Stationary Emergency

Voltage480 to 600 Volts

Frequency60 Hz

Speed1800 rpm

Duty CycleStandby

Engine ModelCat® C13 In-line 6, 4-cycle diesel

Bore5.1in

Stroke6.2in

Displacement763in³

Compression Ratio16.3:1

AspirationTurbocharged Air-to-Air Aftercooled

Fuel SystemMEUI

Governor TypeADEM™A4

Length - Maximum182.8in

Width - Maximum64.2in

Height - Minimum80.3in

Height - Maximum96.7in

Dry Weight - Genset (minimum)6929.1lb

Dry Weight - Genset (maximum)7255.4lb

Standard

Turbocharger

Aftercooler core

Air cleaner - Non canister, disposable

Optional

Air cleaner (Non canister disposable)

Standard

GCCP 1.2

Standard

Radiator sight gauge

Blower fan and fan drive with guards

Radiator, package mounted

Coolant drain valve

Thermostats and housing

Jacket water pump, gear driven, centrifugal

Standard

Exhaust manifold - dry

Optional

Flexible exhaust connection

8" Muffler - 25 dBA attenuation

Manifold and turbocharger guards

Standard

Integral tank base, 24 hours, UL142

Engine fuel transfer pump

Primary fuel filter w/integral water separator and secondary filter, spin on

Fuel cooler

Fuel priming pump

Standard

Complete system designed & built at ISO 9001:2000 certified facilities

All protective devices and control functions simulated and checked

Factory tested to design specifications at full load conditions

Standard

6 Leads

Brushless, self-excited 2/3 pitch (600V uses Internal excitation (IE))

Terminal box, IP22 RHS facing, bottom cable entry

Standard winding protection for non-harsh environments with relative humidity ? 95%

IP23 Protection

Voltage regulator (single phase sensing)

Easy access to AVR and terminals

Insulation system, Class H

Standard

Cat electronic governor (ADEM A4)

Standard

Oil drain with valve

Lubricating oil, CK-4 (10W-30)

Oil filter, spin on

Oil cooler

Oil filler and dipstick

Fumes disposal to front of radiator

Shallow oil pan

Standard

Captive linear vibration isolators between base and engine-generator

Includes lifting provisions and termination points for coolant and lube oil drain lines

Standard

Safety shutoff - High water temperature

Safety shutoff - Low oil pressure

Safety shutoff - Overspeed

Standard

24-volt electric starting motor

24V, 45 Amp Charging alternator

Standard

Vibration damper

Parts book

Lifting eyes

Optional

Extended Service Coverage

UL2200 Certification

CSA Certification

Generator test report

Optional

Wide Base - Skid

Overfill prevention valve

5 Gallon Spill Containment

Fuel tank pill pipe & lockable cap

Integral tank base, 24 hours, UL142

Audio & visual fuel alarm (@90% fuel level)

Optional

1200A LS/I

800A LSI

400A LS/I

Auxiliary contacts

600A LS/I

600A LSI

1200A LSI

400A LSI

800A LS/I

Optional

Volt free contacts

Ground fault relay

Audible alarm Gp

Twist release, Red button emergency stop

20A GFCI (Ground Fault Circuit Interrupter)

100A Load center

Product link remote monitoring hardware

16 -light NFPA 99/110 Annunciator

Optional

E-Stop

Sound attenuated Level 2 enclosure (White)

AC & DC Source lights

Optional

Space heater

Permanent magnet excitation (PMG) generator

Optional

Battery charger (UL Certified)

Jacket water heater

Standard battery set: 1000 CCA, 90 amp/hr.

Oversize battery set, 1400 CCA, 200 amp/hr

Optional

Circuit breaker (IEC) Auxiliary contacts

4 Pole (IEC-100% rated) Circuit breaker - Motorised

Shunt trip for IEC circuit breaker

Optional

Jacket water heater

Battery disconnect switch