Cat® C9 Industrial Diesel Engine

Cat® C9 Industrial Diesel Engine

The Cat® C9 Industrial Diesel Engine is offered in ratings ranging from 205-280 bkW (275-375 bhp) @ 1800-2200 rpm. These ratings meet China Stage III, EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C9 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, Forklifts, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Sprayers, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.

Request a Quote

Maximum Power375HP

Maximum Torque1230lb-ft @ 1400 rpm

Rated Speed1800-2200 rpm

Minimum Power275HP

EmissionsChina Nonroad Stage III, Brazil MAR-1, UN ECE R96 Stage IIIA, U.S. EPA Tier 3

Length43in

Width32.6in

Height40.3in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments1905lb

Engine ConfigurationInline 6, 4-Stroke-Cycle Diesel

Bore4.4in

Stroke5.9in

Displacement537in³

Compression Ratio16.1:1

AspirationTurbocharged Aftercooled (TA)

Combustion SystemDirect Injection

Rotation from Flywheel EndCounterclockwise

Aftertreatment-

Standard

Turbocharged

Air-to-Air Aftercooled

Standard

Electronic governing, PTO speed control

Programmable ratings

Automatic altitude compensation

Power compensation for fuel temperature

Programmable low and high idle and total engine limit

Electronic diagnostics and fault logging

Engine monitoring system SAE J1939 broadcast and control

ADEM A4 Electronic Control Unit (ECU)

Standard

Thermostats and housing, vertical outlet

Jacket water pump, centrifugal

Water pump, inlet

Standard

Exhaust manifold, dry

Optional exhaust outlet

Standard

SAE No. 1 flywheel housing

Standard

HEUI injection

Fuel filter, secondary (2 micron)

ACERT Technology

Fuel transfer pump

Fuel priming pump

Standard

Crankcase breather

Oil cooler

Oil filler

Lube oil filter

Front sump oil pan

Oil dipstick

Gear driven oil pump

Standard

Vibration damper

Lifting eyes

Cold start capability to -20° C (-4° F)

Paint: Caterpillar yellow, with optional colors available at request

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.