Join the Blanchard Team..
Apply Now
The Cat?� C32 Industrial Power Unit is offered with a ratings of 746 bkW (1000 bhp) @ 1800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Applications powered by C32 engines include: Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Request a QuoteMaximum Power1000HP
Maximum Torque3825lb-ft @ 1200 rpm
Rated Speed1800 rpm
Minimum Power1000HP
EmissionsU.S. EPA Tier 4 Final and EU Stage V
Engine ConfigurationV-12
Cycle4
Bore5.7in
Stroke6.4in
Displacement1958.9in³
Compression Ratio16.0:1
AspirationTwin Turbocharged Aftercooled (TTA)
Combustion SystemDirect Injection
Cooling Systemliquid
Rotation from Flywheel EndCounterclockwise
AftertreatmentDOC
Height77.6in
Length100.7in
Width64.4in
Standard
Turbocharged
Air-to-Air Aftercooled
Standard
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Standard
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Standard
Exhaust manifold, dry
Optional exhaust outlet
Standard
Choice of SAE No. 0 or SAE No. 1 flywheel housing
Standard
MEUI injection
Fuel filter, secondary (2 micron)
Electronic fuel priming
Standard
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Rear sump oil pan
Oil dipstick
Gear driven oil pump
Complete this form to get a quote on the equipment you are interested in.
