Join the Blanchard Team..
Apply Now
The Cat® C9.3 Industrial Diesel Power Unit is offered in ratings ranging from 224-298 bkW (300-400 bhp) @ 1800-2200 rpm and meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Request a QuoteMaximum Power400HP
Rated Speed1800-2200 rpm
Minimum Power300HP
EmissionsU.S. EPA Tier 4 Final
Engine ConfigurationInline 6, 4-Stroke-Cycle-Diesel
Bore4.5in
Stroke5.9in
Displacement567.5in³
Compression Ratio17.0:1
AspirationTurbocharged Aftercooled (TA)
Rotation from Flywheel EndCounterclockwise
Length80.4in
Width44in
Height68.5in
Weight4055lb
Width34.3in
Height22.4in
Weight467lb
Diameter13in
Length33.6in
Width11.3in
Height21.7in
Weight42.8lb
Volume Capacity51.1qt (US)
Standard
Turbocharged
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
Standard
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Remote fan control
Standard
Vertical or RH thermostat outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability
Standard
Dual rear PTO configuration
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
Standard
Electronic high pressure common rail
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming
Standard
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Oil dipstick
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
Standard
SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
Standard
Vibration damper
Lifting eyes
Standard
Cat Regeneration System
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
NOx Reduction System (NRS)
Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
Available in 12 volt or 24 volt systems
Standard
Cat Regeneration System
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Aftertreatment Electronic Control Unit (ECU)
NOx Reduction System (NRS)
Pump Electronic Control Unit (PETU)
Available in 12V or 24V systems
Selective Catalytic Reduction (SCR)
Complete this form to get a quote on the equipment you are interested in.
