Cat C280-16 Marine Generator Set

Minimum Rating4700 ekW (5875 kVA)

Maximum Rating4840 ekW (6050 kVA)

Frequency50 Hz or 60 Hz

Speed1000 rpm (50 hz) or 900 rpm (60 hz)

Emissions/Fuel StrategyEPA Tier 2, IMO II

AspirationTurbocharged-Aftercooled

Bore11in

Stroke11.8in

Displacement18062in³

Governor TypeElectronic

Fuel SystemEUI

Compression Ratio 50 Hz13.1

Compression Ratio 60 Hz13:1

Engine ModelVee 16, 4-Stroke-Cycle Diesel

Length366.7in

Width78.3in

Height164.1in

Weight31000 kg/ 68343 lb (engine dry weight), 18145 kg/ 40000 lb (generator weight)

Standard

Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated

Standard

Single Caterpillar^® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)

Standard

Engine coolant water drains

Standard

Dry, gas tight, exhaust manifold

Standard

Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors

Standard

Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves

Standard

Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature