Cat C32 Generator Set (IMO III)

Minimum Rating219 ekW

Maximum Rating940 ekW

Frequency60hz

ConfigurationVee-12, 4-stroke-Cycle-Diesel

AspirationTurbocharged-aftercooled aspiration

Bore5.71in

Stroke6.38in

Displacement1959in³

EmissionsIMO III emissions certified (SCR required)

Rated Engine Speed1500 rpm

GovernorElectronic (A5 ECM)

Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)

Oil Change Interval750 hrs

CoolingHeat exchanger, keel or radiator cooled

GeneratorSR5 - Form Wound

Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)

Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)

Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)

Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Standard

Separate circuit aftercooled (SCAC)

Closed crankcase fumes disposal

Standard

24V control system

Standard

Heat exchanger or Keel Cooling

Watercooled exhaust manifold and turbocharger

Hard seawater lines – no flexible hoses

Flanges for cooling connections, ANSI or DIN

Standard

Primary fuel filter with water separator installed on base frame

Duplex fuel filters with hybrid fuel lines

Optional

Manual or electric fuel priming pump

Fuel cooler

Standard

IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V

Standard

Oil fill, simplex filter and dipstick

Optional

Duplex oil filters

Standard

Helical spring/rubber isolated mounting for vibration and structure borne noise reduction

Standard

Right or left hand service sides

Customer wiring and service tool connector

Optional

MGCPIIIB control panel with Cat^® Alarm and Protection System

IP44 generator protection

Optional

Muffler

Water-in-fuel and exhaust temperature sensors

SOLAS approved spray shielding

Optional

Charging alternator

Optional

Starting motors – air, electric or redundant