Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Minimum Rating219 ekW

Maximum Rating940 ekW

Frequency60hz

ConfigurationVee-12, 4-stroke-Cycle-Diesel

AspirationTurbocharged-aftercooled aspiration

Bore5.71in

Stroke6.38in

Displacement1959in³

EmissionsU.S. EPA Tier 3 / IMO II emissions certified

Rated Engine Speed1800 rpm

GovernorElectronic (A4 ECM)

GeneratorSR5 - Form Wound

Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)

CoolingHeat exchanger, keel or radiator cooled

Oil Change Interval750 hrs

Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)

Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)

Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)

Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Standard

Separate circuit aftercooled (SCAC)

Optional

Closed crankcase ventilation

Standard

24V control system

Optional

EMCP 4.2 control panel

Standard

Heat exchanger, keel or radiator cooled

Watercooled exhaust manifold and turbocharger

Hard seawater lines – no flexible hoses

Flanges for cooling connections, ANSI or DIN

Standard

Duplex fuel filters with hybrid fuel lines

Fuel transfer and priming pump

Optional

Installed primary fuel filter with water separator and manual or electric priming pump

Fuel cooler

Standard

IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V

Standard

Oil fill, simplex filter and dipstick

Optional

Duplex oil filters

Standard

Helical spring/rubber isolated mounting for vibration and structure borne noise reduction

Standard

Right or left hand service sides

Customer wiring and service tool connector

Optional

MGCP II or MGCP IIIB control panel with Cat^® alarm and protection system

IP44 generator protection

Optional

Muffler

SOLAS approved spray shielding

Optional

Charging alternator

Optional

Starting motors – air, electric or dual