Cat C32 Propulsion Engine (US EPA Tier 3 / IMO II)

Power Range660-1600 bhp (492-1193 bkW)

Speed Range1600-2300 rpm

EmissionsU.S. EPA Tier 3 / IMO II emissions certified

Bore5.71in

Stroke6.38in

Displacement1959in³

Rotation from Flywheel EndCounterclockwise from flywheel end

ConfigurationVee 12, 4-stroke-cycle diesel

AspirationTurbocharged-aftercooled aspiration

CoolingHeat exchanger or keel cooled

GovernorElectronic (A4 ECM)

Flywheel HousingSAE No. 0 with SAE No. 18 flywheel (136 teeth)

Oil Change Interval1000 hrs

Refill CapacityLube Oil System w/Oil filter change: 146 L (38.5 gal)

Minimum Length83.9in

Maximum Length89.8in

Minimum Height59.3in

Maximum Height63.5in

Minimum Width57.1in

Maximum Width57.3in

Minimum Engine Dry Weight6950lb

Maximum Engine Dry Weight7160lb

Standard

Separate circuit aftercooled (SCAC)

Optional

Closed crankcase fumes disposal

Standard

24V control system

Standard

Heat exchanger or Keel Cooling

Watercooled exhaust manifold and turbocharger

Hard seawater lines – no flexible hoses

Flanges for cooling connections, ANSI or DIN

Standard

Duplex fuel filters with hybrid fuel lines

Fuel transfer and priming pump

Optional

Primary fuel filter with water separator, fuel cooler

Standard

Oil fill, simplex filter and dipstick

Deep or shallow sump oil pan

Optional

Duplex oil filters

Standard

Adjustable front support mounting system

Standard

Right or left hand service sides

Customer wiring and service tool connector

Optional

MECP I control panel

MECP II or MECP III control panel with Cat^® Alarm and Protection System

Optional

Charging alternator

Optional

Front drives including stub shaft and pump drive

Rear SAE A or B pump drives

Optional

Starting motors – air, electric or dual